KutMaster Multi-tools.
-
I rescued a KutMaster MultiMaster from a local pawnshop for 9 bucks. The blades had some sort of gunk on them. With a little effort, I have the blades somewhat cleaned. After taking the photos, looks like i will also have to clean the interior of the tool. At the time, I figured I was buying a duplicate...however upon closer inspection, there are some differences from my other MultiMaster. Here are the photos of my 3 KutMaster tools.
Top to bottom: KutMaster Wrench-Head, KutMaster MultiMaster, and the newest addition, another KutMaster MultiMaster.

Looking from the top, you can see there are some differences between the two MultiMasters. Now the MultiMaster is a very old design. It came out in the late 80s. I am thinking the newer addition is newer than my other MultiMaster with the logo engraved into the handle as opposed to the laser etching on the new find.

First up is the KutMaster Wrench-Head with the CAT logo.

Next is the older KutMaster MultiMaster.

And yesterday's find, which I think, is a newer MultiMaster.

And a bonus shot of both MultiMaster's 1/4" driver receptacle. Note that the newer addition is on the left, and the older on the right.

-
Nice pics!

What purpose does the handle cover on the bit driver handle serve?I'm gonna get some sheaths, and they also sell these, so I thought I'd get one just for the smurf of it.
-
What are your feelings on the tool? I know the bit driver is very limited in reach, but it has always been an interesting tool to see.
-
On the Wrench-Head...that would be for bit storage.
Sazabi, I feel that KutMaster multi-tools from Utica Cutlery, are an interesting footnote in history. The fact that you can still buy a brand spanking new one today makes this one of the longest production run multi-tools out there. They are a bit crude but are tanks.
You know, upon closer inspection of my photos and those from KutMaster's web site, I am now thinking I bought myself a copy. Anyone have any ideas on if my newest addition is a real KutMaster? I am basing my notion that I have a fake on the obvious lack of quality, especially in the casting.
-
They are an interesting bit of MT history. I like the tool set on the Klein Tool model more as it has a big awl and wire strippers on the file. Then there is the one made for Browning. If I remeber the Browning has the same tool set as the Proto.
-
It might be a copy, or at least one of the Chinese-made versions; it looks quite a bit rougher in finish than the others, even given that it is used. :/
I want to say Knifecenter still has the US-made (supposedly) for about 2/3 of what you can find it anywhere else. I did have a couple of their Chinese-made models, but don't really remember anything special about them.
-
Thanks Sazabi.

-
Oh, that doesn't mean I don't like the tool's looks, nor that it isn't a good piece for the collection; those tools aren't common, despite being a commonly copied design, if that makes sense. It is interesting nonetheless.

Now for bed, I'm rambling.
-
There is a Husky knockoff set. I have it.
-
Bob has a very good info on the KutMaster MultiMaster and its different rebrands over at the Multitool Encyloedia . Includes info, basic time line and changes to look for to help identify offshore production.
-
@Chako said:
On the Wrench-Head...that would be for bit storage.Sazabi, I feel that KutMaster multi-tools from Utica Cutlery, are an interesting footnote in history. The fact that you can still buy a brand spanking new one today makes this one of the longest production run multi-tools out there. They are a bit crude but are tanks.
You know, upon closer inspection of my photos and those from KutMaster's web site, I am now thinking I bought myself a copy. Anyone have any ideas on if my newest addition is a real KutMaster? I am basing my notion that I have a fake on the obvious lack of quality, especially in the casting.
Great thread as usual, Chako!
Yours are great late night reads for me since I joined... :D
I have one of those (or a copy, at least) and I have to agree, they are crude but really tough.
One of the few non big brand MTs I still keep and use, mainly for the 1/4 driver.
Better than the one in my Crunch IMO...
They are very rust prone, though, at least from my experience... :-\
-
Got my Kutmaster Wrench-head today, and I love the driver. The pliers though? They're rubbish. The cutters don't work at all. I know it's not an expensive tool, but come on, cutters are an essential part of pliers. They're half the functionality. And for a tool obviously intended for gear heads and automotive use (spark plug gap tool as evidence), it should be able to cut the kind of wire you'll encounter on a vehicle. Damn things can't even cut zip ties. I have better cutters on cheap chinese tools. Sigh. I am disappoint.
Charles.

-
@ChopperCharles said:
Got my Kutmaster Wrench-head today, and I love the driver. The pliers though? They're rubbish. The cutters don't work at all. I know it's not an expensive tool, but come on, cutters are an essential part of pliers. They're half the functionality. And for a tool obviously intended for gear heads and automotive use (spark plug gap tool as evidence), it should be able to cut the kind of wire you'll encounter on a vehicle. Damn things can't even cut zip ties. I have better cutters on cheap chinese tools. Sigh. I am disappoint.Charles.
To be honest, to find a cutter that can cut copper stranded wire is not an easy task. There's usually some work that needs to be done at the cutter side. It's even a hit or miss with good brands. To have a cheap off brand tool that can do that is really asking for too much imo.
-
Well, I'm testing and reviewing many of the chinese knockoff Toolclip copies, and a good half of them will cut copper wire with no problems. I don't think it's that hard to get right, and I definitely don't think it's too much to ask that a wire cutter be able to cut wires. If this was marketed as a handyman tool or a home renovation tool then yeah, sure, don't expect it to cut anything except Romex. But it's not. It's aimed at auto enthusiasts, gear heads, and people who like to work in the garage. And that means it needs to cut stranded copper wire.
I don't understand why so many people don't expect their tools to do what they're supposed to do and work like they're supposed to work. Are you all just collecting them and not using them? I'm using my tools, and for that reason I need them to actually WORK.
Charles.
-
The knock off manufacturers certainly doesnt care I believe. Their QC are probably just visual, if it looks like a tool, it will pass the test. Not all manufacturers but most I believe, if they even have a QC dept. Sadly, that's the impression that these tools have on people. Of course they are decent or even good ones but they are rare. Honestly, I am pleasantly surprised by your test that half of them are good. Those are gold, keep them well. Most of us do use our tools, there are just go-tos tools for different task. Cutting hard or solid core wire, most cutters works , even cheap ones. If I know I need to cut copper stranded, a cheap knock off will be the last thing I will grab.
-
Okay, I sent an email to Kutmaster complaining that the Wrench Head doesn't... you know... kut any wires. With a name like Kutmaster, I argued, it should be able to cut things. Got a response back saying that was a special run and no longer produced, and that he would send me a USA-made Multimaster free of charge. And made it clear that it was a $69.99 value. (lol, they're $28 on eBay). I received the Multimaster today, in a plain white box with a sheath and a selection of bits... with one bit missing from the holder. First off, it appears to be a used unit. There is some gunk in the teeth of the jaws, some wear from the pivoting jaw against the side plates, and some more gunk attached to the magnet in the bitdriver. My Wrench Head was brand new and had no gunk anywhere. The tool is also recently oiled and sharpened. The pivot screw is shiny plated steel, and of a different type than the normal flat-topped phillips. There's wear on the handle and around the nail nicks above the Multimaster logo. The big deal is that the tool is BENT. The bit driver was obviously torqued more than the tool could handle, and there is a bend in it. The top handle doesn't sit square with the rest of the tool body.
Unfortunately, the Multimaster's cutters are even worse than the Wrench Head's. The Wrench Head I was actually able to save. I took a small file and very lightly attacked the cutter until it was able to cut wires. Not everything, not always in one cut, but they did work passably. The Multimaster has different jaws, and the cutters are machined differently. The Wrench Head there is very little surface available to file before the cutter would become useless due to no longer overlapping. With the Multimaster there's plenty of cutter overlap... the problem is there is just a lot more play in the jaws. Not even play, really.. If I push the top jaw and bottom jaw sideways apart from each other (bottom jaw left, top jaw right), the frame of the tool flexes. I think this flexing is what's causing the cutters to be so bad. I tried filing an edge onto the Multimaster cutters, and they still can't cut anything.
First photo shows the bend. Second photo shows scratches above the "E" in "Multimaster", and on the handle above the "ST". Last pic shows the jaws, the wear (shiny spot surrounded by oil residue), and the non-standard pivot screw.
Charles.



-
Update: I sent the guy photos of the bent tool, and he gave me a WTF :) He's sending me a replacement right away. So that's nice. Also, looking at packaging for the multimaster, it apparently comes with 5 bits and a 6-bit holder, so I wasn't missing a bit.
I don't know whether there are quality control issues with Kutmaster or what's going on really. I do know that they're bending over backwards to make me happy, and that's worth a lot in my book.
Charles.
-
Hey, I just found a "Mountain Quest" branded version of the Multimaster on eBay. It's not my thing, but if you need it for your collection, the link is here: https://www.ebay.com/itm/Mountain-Quest-Multi-Tool-w-Bits-and-Sheath-Pre-Owned/113102975834
Charles.
-
Today I picked up a new version of this tool, the "Winchester Torquemaster".
This tool is a bit of a hybrid between the Multimaster and the Wrench Head. First off, it has all the tools of the Multimaster. The tool channel is wider than the wrench head. It has the same standard nut cutouts in the handle, and the same T-handle bitdriver configuration as the Wrench Head. BUT... look at the rivets on the tool. It has a two-piece jaw like the Multimaster! This is a stronger, more robust jaw design, which also opens larger. The wire cutters, like all of the cutters on these tools, are abysmally bad. There is almost no overlap, less than 1mm. For side cutters to work, there needs to be overlap, and this is just poorly implemented.
The tools are also a mixed bag. The blade is smaller and shorter than the one in the Wrench Head. It's also not very sharp, where the Wrench Head was sharp enough to cut receipt paper. The file is good, it can file mild steel without damage. The Wrench Head shows wear quickly when filing steel. BUT, the Wrench head's file doubles as a gasket scraper. So it's arguably more useful. The saw is a stand out tool, making short work of a small oak branch. It's only got one layer of teeth, but it still does a most excellent job.
So, a mixed bag here. I'm really looking for one of these T-handle tools with two-piece jaws and good cutters, but I don't think I'm ever going to find that. :/
Charles.

-
Interesting tool there, Charles!

I do like the double-rivet jaw on it, but everything else screams China Kutmaster variant. :ahhh
Did you ever receive the replacement U.S.A MultiMaster that wasn't used/bent?
I just ordered an older MultiMaster, with the brand/model actually stamped into the handle, instead of silkscreen ink. Can't wait to compare it to my newer MMs. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



