Charge saws
-
You're welcome prime77, glad it's working for you. I'm also glad to hear that the blade fit and worked in your Wave. (I had my doubts, but wasn't sure.)
BTW, I was contacted by someone direct from Leatherman today, who had read this thread, and was asking for more details and a sample. I was happy to oblige.
Welcome to Multitool.org Leatherman!
-
Leatherman might not be the only company keeping an eye on what we are building here... ;)
Glad to see that they are interested in your saws though. I think it would be really awesome if Leatherman started production on them!
Def
-
I think that it would be great if leatherman started production of them also. I used the one J-sews sent me some more today with the Wave and it worked great. It works just as good if not better than the Surge blade adapter. The Surge outer handles tend to hurt your hands the way the plier handles of the Pst did. But the Charge outer handles didn't bother me at all.
-
I tried to make some wood saw blades today with a dremel. You would have to be extremely good with one to get the right contour of the blade attachment to fit the charge and wave tools.
-
Well the good news is that the LM agent that contacted Bob used to be the assistant of someone at LM named Tim...
Def -
Awesome idea.
-
@Defender said:
Well the good news is that the LM agent that contacted Bob used to be the assistant of someone at LM named Tim...
DefI'm just happy to know that representatives from Leatherman (and apparently other manufacturers) are visiting this site. No matter what your favorite tool is, there will always be room for improvement. I'm hoping if the right people are reading our complaints/praise/suggestions, perhaps some real improvements will come of it.
~Bob
-
I couldn't agree more Bob. Let's hope that as we build and get off the ground that they will take greater and greater interest in us. I'm just amazed that we've had such a response from them already!
Def -
Hey I new to this forum(linked from edc) and like what I see. I also saw the saw mod on another site and made one w/ a dremel. Works pretty good but yours looks fantastic. I guess the right tools make the difference. I'm planning on taking a tour of the Leatherman factory in the next couple of weeks. If you want, I could bring a copy of your saw mod.
-
Just sent you a pm j-sews could really use a metal saw on my Charge.
-
@sadkomodo said:
Hey I new to this forum(linked from edc) and like what I see. I also saw the saw mod on another site and made one w/ a dremel. Works pretty good but yours looks fantastic. I guess the right tools make the difference. I'm planning on taking a tour of the Leatherman factory in the next couple of weeks. If you want, I could bring a copy of your saw mod.Welcome to Multitool.org sadkomodo!
A tour of the Leatherman factory? Wow, you are too lucky!! I'm jealous.
Thanks for your offer on showing them a copy of the saw mod, but I would prefer to continue dealing with the contact I have already established. If you'd like to try one out though, just PM me with your address and I'll send you one. -
-
Thanks a lot J-sews!
-
@prime77 said:
No I used the T-shank wood blade for the Surge. I was just compairing the handling of the Surge to the Charge with your blade. Believe it or not I ran out of metal things to cut around the house. It sure would be nice to have an extra long wood saw for my beloved charge though ;)I see from the picture you posted elsewhere that you have one of the first batch of metal-saws I made, which were almost 4-1/2" long. Initial feedback I got said that the blades should be shorter, to fit in the sheath better. So, I made the second batch of blades 4" long.
How long do you think a wood-saw blade should be?
-
I think that the charge and wave already have good wood saw blades. I just thought it wood be cool to have a longer one for it also. But I see the practical reasons for making the blades short enough to fit in the sheaths.
-
Y'know, it seems like everything in life is a trade-off. I guess saw blades are no exception.
If you go back to the picture at the very beginning of this thread, you'll see a 4-1/2" long wood saw blade. It's the only one I've made so far. I sent it off to Def over a week ago, but I haven't heard that he's received it yet. (I hope it's not hung up in customs or something. :-[)
Anyhow, let me know what you think about length and teeth-per-inch on a wood saw, and I'll whip one up next batch.
~Bob
-
4-1/2 is may be long enough. Any longer may be overkill on a 4" long tool.
-
Everything usually takes about a week to come from or go to the US from here. Plus, my mail carrier likes to skip my small street on Fridays so she can go and get drunk sooner. It was probably supposed to be here today, but I likely won't see it till Monday... assuming she doesn't skip my street again because she's hung over.
Def -
OK, I promissed I'd come back and let ya know how it works; GREAT!
I got the blade yesturday, and it works! Locks in solidly, and stays put. I cut about an inch into 3/32" 1095 (non-hardened) blade steel with it with no problems with it moving in the tool. :) :)
The lenth is good, although about an 1/8" storter might be better, as it has a tendancy of sticking me in the finger when I draw the tool. (With it in the "pocket" behind the tool in the nylon sheath.) But it might be harder to get out, if it was shorter. So its something for personal preference, as I see it.
The TPI is nice, and it works for steel, and I tried it on some brass too. But I generaly like more agressive, like, say 18 TPI. But I don't know how easy it would be to use in that short of a stroke. Again, something up to preference.
The important point is, that it works in the new Wave.
I picked up a 12" 18 TPI "bi-metal with cobalt" blade...... I'm going to try cutting a couple from it, now that I have the one for a pattern. One of those carbie grit blades(Remgrit) might be nice to try too.
Thanks again for sending it! its a realy nice adition to my EDC.
Gary
-
I'm glad it's working for you Ice Tigre. Let us know how the 18 tpi blade works, as I have not tried any of those yet.
Regarding the Rem-grit blade, I've only made one of those. (See picture at beginning of this thread.) I sent it off to Def for testing without trying it myself. I'm hoping his mail carrier recovers from her hangover on Monday morning and delivers it to the right address! :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login