THE Crunch Owners Thread
-
What do you mean by "thumb stud" Karter? :think:
Basically, the way it's supposed to operate is you pull the two handles apart, fold up the plier head then attach the "floating handle" to the little spur on the plier head (ah - is that what you meant by thumb stud perhaps? The sticky-out bit?).
You can open a Crunch one-handed but it takes a bit of practice like this
impressive individualclever bugger a few years back :whistle:- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
I've never seen anyone mod a Crunch with a pocket clip - it wouldn't be that straightforward although anything's technically possible I suppose!
-
I just wanna announce that I envy you Crunch-y guys!

-
@DaveK said:
What do you mean by "thumb stud" Karter? :think:Basically, the way it's supposed to operate is you pull the two handles apart, fold up the plier head then attach the "floating handle" to the little spur on the plier head (ah - is that what you meant by thumb stud perhaps? The sticky-out bit?).
You can open a Crunch one-handed but it takes a bit of practice like this
impressive individualclever bugger a few years back :whistle:- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
I've never seen anyone mod a Crunch with a pocket clip - it wouldn't be that straightforward although anything's technically possible I suppose!
Yes sir the sticky out bit. Also have you ever tried to take apart the crunch where tge blades are for a pocket clip? Or perhaps drill and tap the crunch itself for a donor pocket clip?
-
@Karter Larrabee said:
Also have you ever tried to take apart the crunch where tge blades are for a pocket clip? Or perhaps drill and tap the crunch itself for a donor pocket clip?I've taken Crunches apart to repair / refurb, but always assembled them as standard. To attach a clip you'd need a slightly longer pivot I would think as there's not much slack in there.
If you do take one apart - take care not to lose any of the funny shaped washers between the tools - they're a bitch to replace, lol.
-
The Kick or Wingman pocket clip should fit with minimal work.
-
If you do get a clip to work let us know

-
Anyone tried drilling into a crunch to add a pocket clip
-
part of a nice EDC gear setup


-
:o :o :o :D :o :o
-
Great pics Peacent and you just gotta love the Crunch


-
I just wanted to get on the record to the fact I own a Crunch, bought it quite a few years ago just to have, not EDC as I was carrying a PST and then a SuperTool 200 in those days.
-
Saw, Crush and Cut
Gotta lvoe those three words together :ahhh
-
Nice ones with the Crunch Peacent

-
The Kick pocket clip fits the Crunch, sort of, it goes on but needs a dab of weld to stop it rotating.
I've replaced the barrel pivot with a set-screw because I've modded mine to have an external friction folding blade.
Then I added a pair of Victorinox scissors (where the knife used to be) and a PSTII diamond file.
I've made a high torque bit adaptor which can fit in the jaws or be used stand-alone.
Since taking the photos I've reground the knife into a plain edge, which is more use to me than the original serrated.



-
A photo of my EDC set-up.
The Crunch on a lanyard and a clip on "extra pocket" for the bits.
-
Pry bars seem to be all the rage, so I thought I'd try a Shard as the starting point. The Shard is nicely made and I can see the benefits.
However, I don't want to carry multiple multitools so I've converted it into a Crunch accessory pry.
Chopped off and MIG welded both sides to give a good grip in the Crunch jaws. I've also increased the bend angle of the head.
As an aside I was very impressed with the metal from which the Shard is made - it's very hard indeed.


-
Great mod Bob
Love that pry bar
I love seeing pics of your Crunch and makes me wish LM would give it an update but I am sure it would still fall short of yours :D -
I've had my Crunch for close to 15 years , it always goes on motorcycle rides,
they pair nicely with a SAK . For me it's all about the vise grips.. just can't beat them.
-
@Biker_Bob said:
Pry bars seem to be all the rage, so I thought I'd try a Shard as the starting point. The Shard is nicely made and I can see the benefits.
However, I don't want to carry multiple multitools so I've converted it into a Crunch accessory pry.
Chopped off and MIG welded both sides to give a good grip in the Crunch jaws. I've also increased the bend angle of the head.
As an aside I was very impressed with the metal from which the Shard is made - it's very hard indeed.Great idea.

The Kershaw A100 uses a similar concept for it's accessory bit holder (ie clamped in the plier jaws), and it also has a longitudinal groove in the jaws to hold a saw blade (eg hacksaw). There are all sorts of possibilities once you have locking plier jaws with a very tight grip :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
