key ring, like it or not ?
-
I think it would satisfy everyone if Victorinox make the key ring nub where it could rotate in or out like the Leatherman Squirt. put the key ring in it if you want, or remove the ring and rotate it in if you do not.
Where is the Victorinox Suggestion box?
-
@detron said:
I think it would satisfy everyone if Victorinox make the key ring nub where it could rotate in or out like the Leatherman Squirt. put the key ring in it if you want, or remove the ring and rotate it in if you do not.Where is the Victorinox Suggestion box?
Deffenetly a great idea that would be perfect
Sent from my D6653 using Tapatalk
-
@detron said:
I think it would satisfy everyone if Victorinox make the key ring nub where it could rotate in or out like the Leatherman Squirt. put the key ring in it if you want, or remove the ring and rotate it in if you do not.Where is the Victorinox Suggestion box?
This is MTo, it is utterly impossible to make everybody happy. I strongly prefer the current solution for 91 mm with having it as a part of the backspring. Strong, simple, the polishing of the spring ensures no sharp edges. Even if I rarely use the key ring for anything.
-
I think it would satisfy everyone if Victorinox make the key ring nub where it could rotate in or out like the Leatherman Squirt. put the key ring in it if you want, or remove the ring and rotate it in if you do not.
Where is the Victorinox Suggestion box?
This is MTo, it is utterly impossible to make everybody happy. I strongly prefer the current solution for 91 mm with having it as a part of the backspring. Strong, simple, the polishing of the spring ensures no sharp edges. Even if I rarely use the key ring for anything.
+1 Steiner - very comfortable in use.
I don't like the 93mm nub at all though. I'd love it if a hollow rivet was standard - then you could decide for yourself whether to have a lanyard or not.
-
I think it would satisfy everyone if Victorinox make the key ring nub where it could rotate in or out like the Leatherman Squirt. put the key ring in it if you want, or remove the ring and rotate it in if you do not.
Where is the Victorinox Suggestion box?
This is MTo, it is utterly impossible to make everybody happy. I strongly prefer the current solution for 91 mm with having it as a part of the backspring. Strong, simple, the polishing of the spring ensures no sharp edges. Even if I rarely use the key ring for anything.
+1 Steiner - very comfortable in use.
I don't like the 93mm nub at all though. I'd love it if a hollow rivet was standard - then you could decide for yourself whether to have a lanyard or not.
I like the bail idea better too but it was probably the collective chorus of
crybabieswell informed users that chipped their blade edge that led Vic to "improve" it.... ;) -
Lol. SAK care 101 people. Move the bail away from the blade already.
-
I think it would satisfy everyone if Victorinox make the key ring nub where it could rotate in or out like the Leatherman Squirt. put the key ring in it if you want, or remove the ring and rotate it in if you do not.
Where is the Victorinox Suggestion box?
This is MTo, it is utterly impossible to make everybody happy. I strongly prefer the current solution for 91 mm with having it as a part of the backspring. Strong, simple, the polishing of the spring ensures no sharp edges. Even if I rarely use the key ring for anything.
+1 Steiner - very comfortable in use.
I don't like the 93mm nub at all though. I'd love it if a hollow rivet was standard - then you could decide for yourself whether to have a lanyard or not.
I like the bail idea better too but it was probably the collective chorus of
crybabieswell informed users that chipped their blade edge that led Vic to "improve" it.... ;)But they didn't idiot-proof it enough, I still see 91mm keyrings under awls pretty often.

-
[quote author=detron link=topic=61240.msg1137437#msg1137437 date=1439510436]
I think it would satisfy everyone if Victorinox make the key ring nub where it could rotate in or out like the Leatherman Squirt. put the key ring in it if you want, or remove the ring and rotate it in if you do not.Where is the Victorinox Suggestion box?
This is MTo, it is utterly impossible to make everybody happy. I strongly prefer the current solution for 91 mm with having it as a part of the backspring. Strong, simple, the polishing of the spring ensures no sharp edges. Even if I rarely use the key ring for anything.
+1 Steiner - very comfortable in use.
I don't like the 93mm nub at all though. I'd love it if a hollow rivet was standard - then you could decide for yourself whether to have a lanyard or not.
I like the bail idea better too but it was probably the collective chorus of
crybabieswell informed users that chipped their blade edge that led Vic to "improve" it.... ;)But they didn't idiot-proof it enough, I still see 91mm keyrings under awls pretty often.

[/quote]
Hahaha this does happen to me a fair bit, but the usefulness of a lanyard out ways the cost of me having to re sharpen it from tjme to timeSent from my D6653 using Tapatalk
-
No!
Well, sometimes...
+1
Seriously though, if I need the keyring/lanyard to help pull the SAK out of a pouch or if it's riding vertically in a pocket then yes, but most of the time I want my EDC knife to fall to the bottom of my pocket, so no. But then again, to attach a 58mm on a keyring requires one.
These kinds of questions mess with my OCD. :ahhh
-
So the smaller ones, up to 4 layers I like without, but have some with. Still too much of a dilemma... :ahhh
Removed the one on my Pioneer X, they don't come without them yet.


-
I use them with a pocket clip to keep the knife hanging upright in my pocket instead of lying in the bottom of my pocket, which is especially useful when I'm wearing pants with very deep pockets and I have other stuff in the pockets that might mar a knife such as keys or a money clip. I don't carry many pocket knives without a ring for a lanyard.
-
For me I don't mind the keyring except for 93mm Alox models. For The 93mm SAK's the keyring makes a hotspot when used especially on the farmer. The keyring on the 93mm models is thing and sharp vs the 91mm keyring which is thick and rounded off.
Sent from my electronic multi-tool.
-
I generally like them. I like the pocket hanger clips too. But yes sometimes they can get rattley but I dont mind the dealywoo at all, I might take out the ring but the thingamajig doesn't bother me. On 2 layer 91mm, or 84mm SAK sometimes I might consider a smaller sized ring from the 58mm models.
I'm not much of a lanyard guy aside from knives I'm selling, but I do like clipping SAKs to the interior of tent roofs or on to backpack straps (if light enough) using a carabiner.
That barbed wire pic...thats a McGuyver trick right there, gotta remember that one.
I also imagine if you have 2 SAKs you could attach a wire saw between them and use them as the handles.
Plus you can't turn your SAKs into nunchaku without them.
-
I like 'em the way they aren. And I miss it on SAKs that don´t have them.
I like to put a piece of cord on my tools to make it easier to get it out of my pocket. I don´t use any of those hangers.
My limited skills kept me away from making a lanyard knot. So a simple piece of cord fits best for me.
-
A key ring is essential for me because I like lanyards.
-
Had the Harvester and it bugged me a lot not to have it. To me it's quite important
-
@Alan K. said:
I use them with a pocket clip to keep the knife hanging upright in my pocket instead of lying in the bottom of my pocket, which is especially useful when I'm wearing pants with very deep pockets and I have other stuff in the pockets that might mar a knife such as keys or a money clip. I don't carry many pocket knives without a ring for a lanyard.Same here

I use them to put pocket clips/danglers or attachments (extension cables, cord, etc.)

I hate when SAKs are not flat and straight in the pocket. Also use them to attach to the keychain (58mm only)

Always a fan of clipped/hangin tools! Sometimes I also put lanyards on them, so keyring is important!


-
A SAK absolutely have to have a keyring for me to carry it. I like to dangle it vertically in LFP with a S-biner clip by clipping it to the edge of the pocket. Clip is easy to remove to use the awl or driver.

-
I clip them to my belt loop while sitting in my pocket cause I'm worried about losing them, so keyring for me.
-
it's proven useful today, as I carried this one vertical in the pocket

comfortable carry thanks to keyring
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


