My Attempt at 91mm Bladeless (Hacker Badge Request)
-
It's been a while since I've been toying with the idea of a bladess 91mm multi-tool. Since I've got some leftover parts, might as well go for it.
My idea is based around a SwissChamp. Removing the large and small blade along with the fish scaler, retain the corkscrew and arranging the layers a bit. So here it goes.
The tricky part for this build was to retain the corkscrew. This means making use of the blade's backspring and put in place a metal saw. But this means there should be a stopper at the other end. My approach was to use an extra scissors backspring pictured below.

I've already marked with a Sharpee the area where I need to cut using the metal saw back spring stopper as template. Once marked, took my rotary tool and started grinding. Surprisingly didn't took long. Also did a lot of filing to smooth the edges into desired shape. Below is the result.

Next step was to cut the scissors backspring

Then marked the area where I need to make room for a notch with a sharpee. This is to allow the custom stopper to sit nicely on the blade back spring.

Cutting little by little and doing lots of fitting repeatedly so as to get desired spring tension. And bellow is the result.

And this is how the custom stopper fits.

Since the scissor backspring is about 0.5mm thicker than the blade backspring, and with no access to a bench grinder, I resorted to using a sharpening stone to slim down the stopper. I also initially thought that I would need a washer to compensate for the metal saw thickness. But using a new outer liner (with indentations) solved this.

Metal saw layer now completed with good snap and pop on both implements.
Time to assemble. Nothing really special here as it follows normal practice (at least for me) using tricks already mentioned in this forums.
Below are pics of the assembled layers.





The final layer...

Ready for peening...

And the result, my Bladeless 91mm... Finally...




-
-
-
-
-
Excellent mod, jaya_man.

-
-
-
-
Lovely!
-
-
-

-
-
Nice pics, nice walk through and most importantly nice knife or lack there of


-
-
Nice mod! Neat that the indention meant for the blade works for the metal file with no trouble. Very cool

-
Great job !
-
@sLaughterMed said:
Nice mod! Neat that the indention meant for the blade works for the metal file with no trouble. Very cool
Thx soo much SlaughterMed and Steve [emoji482]

Sent from my iPhone using Tapatalk
-
Like I said in the other thread, great mod!!

Congrats on winning the badge!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login