Micra, not impressed
-
Well, everyone's entitled to their opinion I guess.
-
What do you think of the S4 squirt?
-
Only have P4 not S4, but it's improved over Micra a lot. Still has the chisel ground blade thou.
@DaveK said:
Well, everyone's entitled to their opinion I guess.Compare to the Wenger pocket toolchest I have, the fit and finish just isn't as good.
It just occured to me, the micra came in a brown card board box, which I have never seen any leatherman in, could this be an really old batch that walmart dug up somewhere in their warehouse? It also says pat pending on the unpainted stainless handle.
-
This term "fit and finish" does baffle me a bit. I have loads of Micras and they are all built exactly the same - no noticeable difference in the build quality between any of them - they are actually spot on. They are precisely made (the scissor tips crossing over is part of the design, not a poor "finish"), and are solidly made.
Now, you may well have a dud, and in my experience that would be a rare thing, but I can assure you that Micras in general are not "poor quality". I would think you would be in a very small minority if you claim that they are. Actually, it does bug me how quickly people start to refer to "quality", "fit and finish" etc, when what they really mean is they prefer a different design of tool.
I completely respect your opinion that you'd prefer a 58mm SAK, but I don't understand it. The Micra is (in my opinion) much better and stronger in just about every department than the 58mm SAKs I've seen. I know which one I'd rather cut card or cable ties with anyway!
I actually love the blade on the Micra / Squirt, escpecially when compared to a Vic Classic for example.
But as I say, everyone's entitled to their opinion, I guess.
-
Just saw your edit:
The "Pats pending" is pretty standard, not sure about the packaging, I must have seen half a dozen different packs myself!
It should have date codes though!
-
0999 :ahhh :ahhh :ahhh
They still got two I believe if anybody wants a 9 year old micra.
-
Lol.
The Micra I carry in my pocket every day is a '99 vintage, but to be honest I don't think they've changed the design at all. Except that where yours says "USA" on the scissor pivots, that was changed to "TOOL" after they got sued.
Seriously, it sounds like you got a dud as the tweezers should be even length, and the backsprings should be reasonably taught and snappy. They don't snap like an SAK, but you should notice a distinct click when you open them. Like the PST, they are designed to be used with the tool closed so that they can't close on your fingers, so they don't need to be that strong.
Any chance you could post a pic of the packaging? I'm curious now :D
-
What does the date code 03 08 mean?
-
March 2008 !!
-
Man I got ripped off, now there's only 16 years of warrenty left. >:(
The tweezer tip on mine was like this
/
/| |
|| |instead of
/|
|||but it's fixed now. There are also other minor problems that I need to fix.



-
Dave, how do you sharpen the scissors on the Micra?
Neil
-
Put a CD on edge of table with an inch or so hanging out with a piece of sandpaper (at least 800 grit) on there, now slip one half of micra's scissor on top one on bottom, tilt to approprite angle and sharpen.
-
@jzmtl said:
Man I got ripped off, now there's only 16 years of warrenty left. >:(Nah - it's ok - it's 25 years from your purchase date!
Shame about the tweezers - what did you do, grind them down to align them? I noticed that they are ground like a chisel at the tips, did you manage to maintain that?
-
@jzmtl said:
Put a CD on edge of table with an inch or so hanging out with a piece of sandpaper (at least 800 grit) on there, now slip one half of micra's scissor on top one on bottom, tilt to approprite angle and sharpen.I've never had to sharpen any to be honest. I can get another for about a fiver :D
-
Yep, I ground down the longer one, also give them a tiny bit of flat nose so it should be stronger.
-
I take it Dave likes the Micra ::) :D
I don't have 1 myself but I may have 1 before years end or not who knows ;) :D
-
Put a CD on edge of table with an inch or so hanging out with a piece of sandpaper (at least 800 grit) on there, now slip one half of micra's scissor on top one on bottom, tilt to approprite angle and sharpen.
I've never had to sharpen any to be honest. I can get another for about a fiver :D
I'm obsessive compulsive on keep every edged tool razor sharp, first thing I do with every factory edge is tune it to my liking. ::) :(
-
@jzmtl said:
Man I got ripped off, now there's only 16 years of warrenty left. >:(The tweezer tip on mine was like this
/
/| |
|| |instead of
/|
|||but it's fixed now. There are also other minor problems that I need to fix.
Wow those boxes look nice! I wish the Micra I purchased today came in a box like that.
-
/
/| |
|| |My tweezer tip looked like that too. I just thought that's the way they were supposed to be.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
