Super Stack challenge attempt
-
After some poking around on ebay I found that there is a fake of the SVC2 with no markings. I dont know about the packing it comes in.
Mine was purchased from a domestic sporting goods seller, but that doesnt mean a thing.
The quality is on par with my nephew's base style Companion.Not saying it is fake; to be honest I really cant tell on this one.
I just thought to add this concidering the Mako Counterfeit that I just posted in the keyring & OPT board/topic/68329
-
Day 6 Wednesday
Never try and take a photo of your multi-tool and a tree with your dog wrapped around you. Makes it kind of hard to hold the camera steady.


-
Day 7 Thursday
Not much going on today, so a simple fan on the fence. Not my fence, I just picked a random fence.
-
@Noa Isumi said:
Day 6 Wednesday
Never try and take a photo of your multi-tool and a tree with your dog wrapped around you. Makes it kind of hard to hold the camera steady.I can barely hold the camera steady without any distractions :D
Great pics buddy
Keep it up 
-
The 8th Friday
Since I posted my dump over on the EDC challenge thread firm IDC but I figure I'll cover my duffle bag today. While I don't carry the bag all the time it's usually nearby and the car or at work with me.
The first pic is the bag itself with my ST300 which rides on my belt lid on it the second one is the bag expanded with all of that stuff laid out everything fits in the side compartments leaving the main one empty for stuff I may purchase or gather during the day.

-
Nice setup Noa


-
I specifically set my pack up so that the only blade in the whole thing was the one in the box cutter. This means I can adjust my loadout to enter most non-permissible environments without having to be unprepared.Though I do still have to leave half of what I carry in my pockets in the car.
-
Day 9 Saturday
A disaster averted. Pics on the bottom of these birthday candles were just a little too long to actually stick in the cake at still put the dome on. The wire cutters made quick work of that.

-
Day 10 Sunday
Today's post is less about the ST andmore about carabiners.
The first pic is my safety harness. I spent about 10 years working for one of the companies that manufacture this type of equipment. I ranged from assembler to Quality Control to machine operator even did the design work and prototyping. I was one of the few people outside of the training staff that actually knew how to use it occasionally did use this equipment in real life.What you see here is my personal harness; a custom model with a million letter long ID number. Really this was a sample to see how many functions and features we could put into one harness.
Nowadays my uses for carabiners are little more mundane. I still keep my harness just in case I ever need it, and occasionally I haveEdit, I just realized how lousy the pic of the harness is....I'm ashamed concidering that product photos were one of my asignments.
I forgot to mention: not pictured here I have another rig that's just a heavy duty rigger's belt similar to the one on this harness but with different D rings and no pad. Technically it's the upgrade for one of the later model harnesses that was designed with to take a removable belt. (not one of those tactical jobs from Condor 511 like I wear in my EDC). along with three 80ft bundles dyneema line w ultralight hooks on the end
Those are what I used to take when I decide to go really off the beaten path. Not true climbing but good for really steep hills


-
Day 11 Monday
A small try stick. While I didnt cut all the usual notches I did stick to just the main blade where the other tools could be used as is proper for this excercize.

-
@Noa Isumi said:
Day 11 Monday
A small try stick. While I didnt cut all the usual notches I did stick to just the main blade where the other tools could be used as is proper for this excercize.Never heard of a try stick
Pretty neat though

-
A try stick is simply a series of cuts made for practice. It serves as both knife skill training, and a standard for testing the comfort/function of a knife. Many of the cuts are found in bushcraft, camping, joinery, shelter building, and trap trigers.
As you can see by the roughness of my work I haven't been keeping my skills as sharp as I should.
-
Day 12 Tuesday
Some of you might be bored at the office so here's a little fun.
The office supply slingshot use your MT as frame, wedge the pliers open with a coin to get a little bit spread on the handles, and wrap a few rubber bands around the tools for your band.
Diffrent rubber bands give diffrent power, large flat ones work the best. I have hit a coworker with an eraser at 60ft+ before. >:DUnfortunately all I had were the weak little bands that aren't verry stretchy, so I doubt it will preform that well.

-
@Noa Isumi said:
Day 12 Tuesday
Some of you might be bored at the office so here's a little fun.
The office supply slingshot use your MT as frame, wedge the pliers open with a coin to get a little bit spread on the handles, and wrap a few rubber bands around the tools for your band.
Diffrent rubber bands give diffrent power, large flat ones work the best. I have hit a coworker with an eraser at 60ft+ before. >:DUnfortunately all I had were the weak little bands that aren't verry stretchy, so I doubt it will preform that well.
I
that idea for sure :D Will definitely find me a rubber band for this 
-
Day13 Wednesday
This i what happen when you build racks out of scrap and zip ties.
No, this is not my mess. I just get to "fix" it.
Don't worry the solution is simple; bank line, hose clamps, and more zip ties



-
Day 14 Thursday
Since I just PM'd Grant for one of those MTO hats he's selling, I figure today I will show a couple of my current hats.
I used to always brimed hats like fedor, boonie and drovers. Ball caps used to be something I only wore at work to keep the glare from lights down, and protect my face from flying hardware. Just tipping my head down and buckels, D rings, carabiners would hit the bill instead of me.
Now I wear them all the time
-
Day 15 Friday
Don't know why I thought I could do a project on a Friday. Fridays are always crazy busy.
But since I'm not going to get to it today, I will at least show you what I have planned. Hopefully I'll get to it later tonight and be able to post it tomorrow.
Ehat I'm looking at making here is an astronomical ring ,a simple navigation measurement tool. now normally and by the instructions that I have it's supposed to be made out of steamed wood or brass; I however am using a 4-inch pvc plumbing connector. I'm going to try and do most if not all the work with just the tools seen here. Hopefully I'll be able to get the holes drilled with the all and still having to resort to a power drill.
-
Day 16 Saturday
I got the ring mocked up. I did bore the holes with the awl, and the notches at 0 & 90 deg were cut with the file. Really it is just a matter of layout.
Since this is my first try at one of these I didnt go all out, which may be why it looks like it was made by a 3rd grader. But there is a forgiving nature to the kid approach. And I did set my own ground rule of only using EDC items to make it, which excluding the multi-ruler I stuck to it. I may have to get another one for my pack.The way it works is you hang it freely the ring and align the hole with the sun. This will produce a dot of light on the scale giving you a rough angle reading. Rough it is too. The scale is 10deg intervals and the dot on mine is almost 10deg across. I think I made the hole too big. This may not be an issue on a larger size ring, or with a smaller hole. And obiously my lines aren't as straight as they could be, but I was using a cigarette pack as a square after all.
Edit.
I added a pic of how the book shows it bieng layed out
"Latitude hooks and azimuth rings" by Dennis Fisher



-
Day 17 Sunday
I started a thread featuring this little hobo tool over in the cheap and cheerful section; but I figured I'd use it as a prop for today's photos since I was lacking any other real inspiration today
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
