Esbit 585 cookset?
-
@Spork, Lord of Lime Jello! said:
A least this necro was a useful one ::)Perhaps raising the pot up a bit with a fan grill would lower the time a bit...increase the draft and allow more flame contact.
I'd forgotten about that suggestion you made (well, it was a few years ago) and I do definitely think it's a good one.

-
I dug mine out for a play...16oz of water and gel fuel...
12:51 to rolling boil in normal position...9:03 raised on a grill. I do need to make a taller windscreen for it...the one that stows inside is too low when used on a solid surface.

-
I've been trying mine with some Dragon Fire gel fuel and with some meths, both just put in a old air rifle pellet tin. I didn't take any exact times, but the meths had 350ml of water up to a rolling boil in around 8 minutes, the Dragon Fire took nearly twice that.
I did go looking at the back of an old PC I had kicking around, but it doesn't have that style of fan grill. :-\
-
I'm using ethanol based chafing fuel...fairly inexpensive from the party supply store.

-
I set up a new tin...a 1oz sliptop. The ideal behind the row of holes is to allow air to enter at the base of the flames below the rim. The thought behind this is the flames don't dance about as wildly because of air flowing over the rim. In this case it was only mildly successful as the hole size was limited by the tin. The pic shows the gel soon after lighting...the flames did get larger as it heated up.
I didn't time this run, but it got 16oz to a rolling boil on 5/8oz (by weight) of gel. I've been weighing the fuel so I can visually estimate how much to fill the tin.

-
Nice idea. Another one I might steal. ;)
-
Tried and tested myself, coat the outside with dish washing liquid before use and the soot comes off easy as pie after use.

-
@Spork, Lord of Lime Jello! said:
I set up a new tin...a 1oz sliptop. The ideal behind the row of holes is to allow air to enter at the base of the flames below the rim. The thought behind this is the flames don't dance about as wildly because of air flowing over the rim. In this case it was only mildly successful as the hole size was limited by the tin. The pic shows the gel soon after lighting...the flames did get larger as it heated up.I didn't time this run, but it got 16oz to a rolling boil on 5/8oz (by weight) of gel. I've been weighing the fuel so I can visually estimate how much to fill the tin.
Just tried this myself and had pretty much the same result. Works well to start with but gets bigger after a few minutes.
I have also ordered some fan grills though. :D
-
Interesting to see the different ways people are using these. I also have one, and I really like how small, light and simple it is. Good to see that wood works in it. I might just replace the feet on mine so I can use wood as an alternative fuel. Normally I use hexamine: it's foolproof, which is good for me :) And cheap if you find a good army surplus shop. I find I get a boil on 2 quarters of an army hexi block with the pot around half full, and another quarter gets a long enough boil to do some quick-cook pasta or noodles. Cooking times using hexamine are all about surface area I think. Half an army hexi is the same weight as 1 Esbit, but split into 2 quarters and stood on edge it burns faster due to the greater surface area.
-
I tried it burning wood in a strong breeze and I've got to say it was a pain. Even before my wind shield blew away it was tough to keep a hot enough fire fed to get the water boiling. I certainly wouldn't want to rely on the fire idea alone.
-
@shibafu said:
Interesting to see the different ways people are using these. I also have one, and I really like how small, light and simple it is. Good to see that wood works in it. I might just replace the feet on mine so I can use wood as an alternative fuel. Normally I use hexamine: it's foolproof, which is good for me :) And cheap if you find a good army surplus shop. I find I get a boil on 2 quarters of an army hexi block with the pot around half full, and another quarter gets a long enough boil to do some quick-cook pasta or noodles. Cooking times using hexamine are all about surface area I think. Half an army hexi is the same weight as 1 Esbit, but split into 2 quarters and stood on edge it burns faster due to the greater surface area.I agree with the increased surface area theory. I've split Esbit tabs in half myself...placed with a small gap between the pieces. It seems easier to light with a match laid in the gap too.
-
-
Looks tasty. :D
-
Just so happens that I got the grill through today. The difference it makes in boil times is extraordinary. It's most definitely now part of the kit.


-
Not done any time trials yet but the holes in the side of the burner try definitely seem to bring the meths up to temperature faster.

-
@Spork, Lord of Lime Jello! said:
Just so happens that I got the grill through today. The difference it makes in boil times is extraordinary. It's most definitely now part of the kit.
Makes me wonder if the people who design these things ever test them at all :P
Sadly I don't think I've got any more Esbit tablets left to see if the grill improves their use.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

