Painting MultiTools
-
I would avoid painting any interior areas, especially around pivot points as it could affect the function of the tool. Other than that I would try an automotive paint as they are pretty hard wearing usually. Otherwise your tool will end up looking like my trusty old Micra!

Def
-
I dunno about this....it seems like paint NEVER sticks very well to stainless steel. Def's Micra is a good example. Even better were the painted Gerber 600's, which had a bead blast finish underneath, but even they lost their paint rather easily. :-\
-
Powder coat is very hard wearing, so now you got to find someone that can powder coat your MT.
-
I would think the powder coating would be too think and not allow the proper clearance. I think someone else mentioned that in an earlier thread about powder coating a tool.
-
Too be honest, I don't know. I just know that Powder coat is hard wearing.
-
I agree with the toughness of it. I have a supplier who does powder coating and had them coat of few of my ATV parts and after a few bounces off of trees and hard riding this stuff hasnt scratched yet.
-
I agree, powder coating would be the best solution. You can buy home powder coating kits, but you'll have to clear the use of the oven with the wife. ;)
Clearance shouldn't be an issue if you disassemble the tool completely and mask off the insides of the handles.
-
^^ I agree with Terry. You'll definitely need to totally dismantle the tools, otherwise any paint / coat you give it will look crap around the knurled screws.
You'll find that a Micra dismantles into 26 parts. :P (At least I think it was 26 - it was about that anyway).
What colour are you going for Mat?
-
Thanks guys
. I was hopping too paint my Micra Ferrari/Ducati RED & my modded pocket clip on it black. The Pulse I would like to paint it Kawasaki Green(Lime) & it's pocket clip black too, I love the look of ZXR 750's :D :D. Wanting too paint was one of my motivations to find a way too pull apart my LM's .I had not thought that painting the inside of the tool would be a problem, thanks. I think I will have too do some more research , it looks like stainless steel is a challenge too get paint too adhere too , as Bob mentioned -
An idea!
For the Micra, why not see if you can source an old painted one (like Def's above). I've nitromors'd a few of these to get the last flecks of paint off, and the finish underneath is far less shiny than a factory stainless finish. Nowhere near as highly polished, presumably so the paint sticks a bit better.
Colours sound nice btw.
-
What about Duracoat?
-
@tango44 said:
What about Duracoat?
http://www.duracoat-firearm-finishes.com/Duracoat works on SS, but you must be careful because you can get it thick very easily and it sets quickly. Where space is tight, like with a multi or knife, you gotta be careful not to apply too much. However, if you're simply applying it to the exterior side of the handles you may be OK. One nice thing is you don't have to undertake anything drastic to prepare the metal for Duracoat. No sandblasting, etc., is required, other than a good degreasing/cleaning. If you want a nice, durable coat then go with a 7 day curing. Gun Kote is thinner and cures faster but my buddy likes Duracoat because you don't have to sandblast the item(s) beforehand.
-
Thanks for the tips guys, Duracoat? I wonder if I can source that locally in Oz? The Lime green looks pretty close too Kawasaki Green :D. Needing a airbrush & compressor which I do not have is a bummer.
-
@One Lame Frog said:
Thanks for the tips guys, Duracoat? I wonder if I can source that locally in Oz? The Lime green looks pretty close too Kawasaki Green :D. Needing a airbrush & compressor which I do not have is a bummer.
But a good excuse to get them. :D
Exactly. 8) Then you can get into airbrushing tshirts on the boardwalk. ;)
-
Apparently DuraCoat is hazardous material in its liquid form & can not be shipped outside the US :( :(.I have found 1 oz supplier who charges $70 for 1 4oz bottle :( , ebay US sells them for $25 >:(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login