My first EDC design: the first truly all metal expandable wallet
-
@Grant Lamontagne said:
First off, welcome to the forum! You will not find a better group of people to help you come up with a very workable design, just watch out, some folks here may want you to add a thousand features without increasing the price!
I have some input, but before I give it I would suggest that you keep in mind that I have yet to find a hard wallet that I like. I am y no means trying to be negative about your design, but I do have some questions.
First off, does only one side have a spring? Or do both sides compress?
What about cash? I usually always carry cash, as I am certain a bunch of EDC minded people do, and many of these wallets don't have spots for cash. Do you think maybe a money clip on the outside might detract more than it is worth?
Also, I have some cards that do not conform to the standard- my insurance card for example is all paper and larger than typical credit cards, and therefore would not fit in this wallet. Ditto for my outdoors cards. These might also fit in a money clip.
Lastly, as I also collect receipts for my job and my business in my wallet I need space for that as well.
I will say that your design looks very interesting, perhaps as a business card holder?
Again, I am not an expert, nor am I trying to be negative, so I hope you were sincere in asking for input!
Def
Thank you for the response!! I am looking for criticism and first impressions, so your input is very welcome and appreciated.
So to answer your questions:
The left and right side both have internal springs. The springs make the halves want to stay parallel to each other and pull towards each other.
You can still put cash in this wallet. I forgot to put up a picture of cash, so I've added one.
Im my personal opinion, I'd like to not add a money clip to this particular design, and accomplish cash holding within the main compartment.
This wallet is definitely in the "minimalist" category. I would say it would work well for someone who already uses a very thin wallet with a few cards and a couple bills. It wont be able to hold as much as a full size leather wallet though.
The storage compartment is designed with about 0.02" extra space beyond the standard card shape on the left and right. I could make this space bigger. It will make the whole wallet bigger but if its just another 0.05" or so that might not really have an impact, and allow larger cards to be stored.
-
-
@JBW1 said:
Just curious about what it weighs "fully loaded"? I really like the design of it, I really want to like it, but one thing that would be a concern for me is how does it carry or sit in your pocket? Great idea for sure! And.......welcome[emoji106]Hi, thank you for your questions.
It weighs 2 ounces without anything in it. Its weight with cards will of course go up, credit cards weigh around 0.15oz each.
It is a solid metal object, so it should compare to all metal wallets in that respect. However its much smaller than a cell phone, for instance, and doesn't generate heat. So its quite comfortable to carry around. I'm using it as my wallet and so far its been good. Heres a pic comparing it to my old leather wallet, which was a very thin one. Actually I think technically it was a business card holder.
Also heres an animation of how it expands.


-
-
It does look pretty cool- the only other thought that I would have is to maybe round off some of the edges. They look like they could be damaging to clothing or parts of one's anatomy!

Def
-
@Grant Lamontagne said:
It does look pretty cool- the only other thought that I would have is to maybe round off some of the edges. They look like they could be damaging to clothing or parts of one's anatomy!
Def
thanks! which edges look sharp? all of them are rounded except for the outer corners (of which there are eight)....I could definitely round them off more..
my phone doesnt take that great of pictures..
-
-
Forgive the horrid MS Paint arrows, but these look like they might be a bit pokey. These might just look pokey in the photos, obviously I have no idea how they are in real life so I could be way off base here too.
Def


-
@Gohard said:
Great workmanship.
I never had a metal wallet and never had the urge to get one. The idea of it in your back pocket without any flexibility is what puts me off. So the question I got. How comfortable is it to wear or sit with it in ones back pocket?I would agree. As far as metal wallets in general go this is one of the unavoidable facts of life. I go a step further and I dont really like anything in my back pocket when I'm sitting down, even my super thin leather wallet.
That said the best I can describe how it feels sitting would be this: its significantly smaller than an Iphone 4, and about the same thickness. So if you would consider sitting with one of those in your pocket then it would be more comfortable, especially since it doesnt generate heat.
-
@Grant Lamontagne said:
Forgive the horrid MS Paint arrows, but these look like they might be a bit pokey. These might just look pokey in the photos, obviously I have no idea how they are in real life so I could be way off base here too.Def
nope you're right those are sharp..I can definitely round them off no problem. I like how they look sharp but I can radius them so that they dont cause problems.
-
@Grant Lamontagne said:
Forgive the horrid MS Paint arrows, but these look like they might be a bit pokey. These might just look pokey in the photos, obviously I have no idea how they are in real life so I could be way off base here too.Def
wait just to be clear..the long edges are all filleted/chamfered already. Its the short edges (across the short ~1cm thickness of the wallet) that are full sharp..the pics make it hard to tell...but either way I'll make sure 100% of the corners and edges have some amount of filleting/chamfering
-
Welcome to
Very interesting design you have there
I am a maximalist and carry a pretty good sized leather wallet so this may not be my cup of tea I do enjoy the process of seeing how it works and all the ins and outs of it 
-
@Poncho65 said:
Welcome to
Very interesting design you have there
I am a maximalist and carry a pretty good sized leather wallet so this may not be my cup of tea I do enjoy the process of seeing how it works and all the ins and outs of it 
thank you! yes this is definitely a minimalist design. But...I do have something very special in mind for a bigger all-metal "maximalist" wallet that could really take the place of a big leather one, but without being a big solid block. Thats the next project though..first things first!
-
Thin leather wallet is still ok to sit on. But not a solid Wallet. But like the concept. There will be lots of people out there that supports your idea and good luck. And great workmanship. Hope it works out for you with all the ideas and support from these guys.
-
-
@carinson43 said:
Im my personal opinion, I'd like to not add a money clip to this particular design, and accomplish cash holding within the main compartment.How about giving the user the choice? Something like how the Thrunite T10t and plenty of other flashlights, knives etc. add their clips?
-
Welcome to MTO!
I gotta say, that is some serious craftsmanship. Nicely done. I love the looks of it. There are two things that I hate carrying, keys and a big wallet. The less keys I have to carry and the smaller the wallet I have to carry, the better. This looks like a good option and made of metal is a plus.
I have to agree with Fortytwo, I think the option for a money clip to add to it would be a good idea.
Unless I missed it in your OP, about how many cards will it hold?
Also, you plan on doing any engravings or custom work on them? They look like a good platform to personalize.Best of luck man.
-
As far as why metal, I think functionally there is the benefit of RFID blocking. Beyond that..as far as I know its mostly style and preference. Maybe there are more reasons, I'm not sure.
Since there seems to be more than one person interested in a money clip option, I will look into that and see what I can do. There isn't a whole lot of room for screws to mount one, but I bet I can figure something out. I'd also probably not be able to make the money clip myself since it would most likely be a piece of formed stainless. But it would probably be inexpensive enough in large enough quantities. So probably realistic.
Engravings may definitely be an option on kickstarter, perhaps the first 50 people get custom etching or what not. I've had more than one recommendation on that as well.
I've made a rev 3 design now, (the last was rev 2). I tried to add some more aesthetic features and also change the ridges on the back to be more visually appealing while still doing their job (creating a gap to make cards easier to insert).
Opinions? Better or worse?
Its really tempting to put this up on kickstarter right now to see what happens..but I think I should make a production quality prototype with a proper finish. In other words one that doesn't look like a prototype anymore. Thats going to take a few days.
Also the minimum number of cards in the current design is around 3, and the max is around 8. This can easily be changed though. I think those are good specs...more on the minimalist side which is what its really designed for.


-
-
@jcs0001 said:
Nice looking design. I would suggest testing it's Rfid blocking capabilities and emphasizing them a bit if it is indeed effective as a blocker.John
Thanks. I'm basing its RFID blocking capabilities based on other RFID blocking metal wallets I've seen that only have one side metal. Since mine has two sides metal I would think it would have to work as well or better.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login