SOG Scissors? Opinions Needed
-
The SOG scissors are upside down. They're outboard designed implements mounted into an inboard tool arrangement and they suffer because of it. If you look at many of the Gerber offerings, the SOG's are quite similar but instead of the moving arm being up above the tool so you can press down with your thumb, it is down towards the centreline which makes them awkward in use. I did put some scissors in my Paladin PT-510 which work rather well ... they're from a LM PST II
-
SOG scissors just don't have any sort of foldover for the thumb so they are as comfortable as Leatherman scissors and they don't cut as well as Victorinox scissors.
Also I've noticed SOG scissors tend to have trouble locking in the open position, both the newer piano locks and older locks. Not all of them have trouble but I've seen the trouble often enough on SOG's I've owned to believe it may be a pattern.
They are certainly better than the v-hook for cutting paper or cutting fingernails which is what i use them for mostly.
-
They are no good
-
@50ft-trad said:
@50ft-trad said:
I did put some scissors in my Paladin PT-510 which work rather well ... they're from a LM PST II
I knew I'd seen the PST scissors in a SOG somewhere here, that was yours then, good idea to

... and a diamond file too :D :D

Thanks for this, will be on the list of things to try at some point
On a side note, shame SOG doesn't put those gear covers on their standard PPP, still I'm liking these SOG's. -
My personal experiance is that theyre no worse than those on a Wave,but not as good as Vic snips.As long as it just on light tasks they're fine.
-
Thanks for the advice. Looking at them sort of gave me the same impression but looks can be deceiving. That is why I decided to get some opinions from those with experience. I have also noticed since that they are what SOG classifies as a Large Component and are only compatible with the PowerLock. I didn't notice that at first and I was thinking of adding them to a PPP. I'm sure some modding could be done to make them work but I wasn't interested in doing that. Thanks again.

-
They're too big to fit a Paratool but they are spot on for PPPs
-
@1jump2many said:
Thanks for the advice. Looking at them sort of gave me the same impression but looks can be deceiving. That is why I decided to get some opinions from those with experience. I have also noticed since that they are what SOG classifies as a Large Component and are only compatible with the PowerLock. I didn't notice that at first and I was thinking of adding them to a PPP. I'm sure some modding could be done to make them work but I wasn't interested in doing that. Thanks again.

See pic attached, another wizards works
not to bad a job to do, I think the scissors need a little trimming to fit the Paratool but fit the PPP. I'm sure the creator of this mod will be along soon and explain better 

-
Thanks for the advice. Looking at them sort of gave me the same impression but looks can be deceiving. That is why I decided to get some opinions from those with experience. I have also noticed since that they are what SOG classifies as a Large Component and are only compatible with the PowerLock. I didn't notice that at first and I was thinking of adding them to a PPP. I'm sure some modding could be done to make them work but I wasn't interested in doing that. Thanks again.

See pic attached, another wizards works
not to bad a job to do, I think the scissors need a little trimming to fit the Paratool but fit the PPP. I'm sure the creator of this mod will be along soon and explain better 
Nice one Jeff

-
@badwolf said:
See pic attached, another wizards works
not to bad a job to do, I think the scissors need a little trimming to fit the Paratool but fit the PPP. I'm sure the creator of this mod will be along soon and explain better 
Thanks for the picture. I've added a hook to my Paratool a couple years ago. They no longer sell the hook, it's not the V-Cutter. I should post a picture but I deleted my picture hosting account and don't feel like opening another. :ahhh :)
I wonder why SOG only mentions it fits the PowerLock? I really like scissors on MT's but I'm not sure about these yet. Thanks again.
-
@badwolf said:
See pic attached, another wizards works
not to bad a job to do, I think the scissors need a little trimming to fit the Paratool but fit the PPP. I'm sure the creator of this mod will be along soon and explain better 
Thanks for the picture. I've added a hook to my Paratool a couple years ago. They no longer sell the hook, it's not the V-Cutter. I should post a picture but I deleted my picture hosting account and don't feel like opening another. :ahhh :)
I wonder why SOG only mentions it fits the PowerLock? I really like scissors on MT's but I'm not sure about these yet. Thanks again.
You can still get the hook from one website; unless you're referring to the Paladin hook tool, in which case all you have to do is contact Palidin and request some replacement parts for your PTxxx. ;)
-
@Sazabi said:
You can still get the hook from one website; unless you're referring to the Paladin hook tool, in which case all you have to do is contact Palidin and request some replacement parts for your PTxxx. ;)It's not the Palidin wire feeding hook. Do you have a link for the hook you are referring to? I'm curious to see if it is the same one. I Googled it and didn't come up with anything. The one I have is sort of a belt cutter or gut type hook.
-
@Sazabi said:
You can still get the hook from one website; unless you're referring to the Paladin hook tool, in which case all you have to do is contact Palidin and request some replacement parts for your PTxxx. ;)It's not the Palidin wire feeding hook. Do you have a link for the hook you are referring to? I'm curious to see if it is the same one. I Googled it and didn't come up with anything. The one I have is sort of a belt cutter or gut type hook.
Ask and ye shall receive:
http://www.knifecenter.com/item/SOG31SLC/sog-paratool-serrated-line-cutter-
Also, wrenches, if you need them: http://www2.knifecenter.com/item/SOG31WK/sog-wrench-accessory-for-paratool-
-
Sazabi beat me to it but for more info try here /topic/31188 and here /topic/2320

-
@Sazabi said:
Ask and ye shall receive:http://www.knifecenter.com/item/SOG31SLC/sog-paratool-serrated-line-cutter-
Also, wrenches, if you need them: http://www2.knifecenter.com/item/SOG31WK/sog-wrench-accessory-for-paratool-
Thanks Sazabi, the serrated line cutter is the "hook" I have on my Paratool. I should get one to put on my PPP instead of the scissors. Thanks again.

-
Ask and ye shall receive:
http://www.knifecenter.com/item/SOG31SLC/sog-paratool-serrated-line-cutter-
Also, wrenches, if you need them: http://www2.knifecenter.com/item/SOG31WK/sog-wrench-accessory-for-paratool-
Thanks Sazabi, the serrated line cutter is the "hook" I have on my Paratool. I should get one to put on my PPP instead of the scissors. Thanks again.


-
Can someone give me the dimensions of those scissors? And diameter of the hole. I consider to put them into Leatherman Rebar.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login