Show your slip joint's thread!
-
I got a copperhead during the 30 day challenge and noticed the resemblance to the canoe pattern.
So I did a google search to find out which came first the canoe or the copperhead.
I only learned that they both appeared in the early 1900's.Sorry bud, I didn't mean it bad. I just wondered if it had features that Queen considered unique for it to be a Work Horse instead of a Canoe. Is it big...like in the 3 7/8th - 4" range? I'm fascinated by patterns/names of pocketknives.
I didn't take it bad, we good. Sometimes with text it's hard to take whats in your mind and make it come out right.
It is a Canoe pattern, 3 5/8".
The workhorse name is Queens line of working knives. They are 1095 instead of D2.
Delrin or some kind of composite handle material instead of bone & the pins are exposed. Basically just an inexpensive work knife. -
@Dean51 said:
I carried this Queen Workhorse WH64 today, it's an interesting little single blade knife. They sure have packed the blades in tight but it makes a nice slim package. It's got a composite handle material of some sort & 1095 steel.They are a great pattern, aren't they? After I got home from work today I slipped my SF Queen canoe into my pocket after seeing yours this morning and have used it several times this evening. I especially like the pen blade. It's a deep blade, but it's thin and it has an excellent tip for detail work. It's slim frame defies how tough a knife it really is. The sunk tangs make it extremely comfortable in the hand and easy on the pocket. No need at all for a slip when carrying this one.
-
Nice Whaler there SG!
Great looking WH64 Dean!
-
The naming of traditional models is a big topic. Some names are standard, some are just area or company specific.
In the UK most small slipjoints were described as just penknives.is a barlow just a bigger peanut?
GEC tends to do that and being dominant with knife nuts it can. Bullnose is a sodbuster, for example.
Elephant toe nail - sunfish can be the same size and styleJack knife is used as a general term for many styles
you have terms like "modified" or "improved" for variations of a basic style....
and that is just in English...
-
I got a copperhead during the 30 day challenge and noticed the resemblance to the canoe pattern.
So I did a google search to find out which came first the canoe or the copperhead.
I only learned that they both appeared in the early 1900's.Sorry bud, I didn't mean it bad. I just wondered if it had features that Queen considered unique for it to be a Work Horse instead of a Canoe. Is it big...like in the 3 7/8th - 4" range? I'm fascinated by patterns/names of pocketknives.
I didn't take it bad, we good. Sometimes with text it's hard to take whats in your mind and make it come out right.
It is a Canoe pattern, 3 5/8".
The workhorse name is Queens line of working knives. They are 1095 instead of D2.
Delrin or some kind of composite handle material instead of bone & the pins are exposed. Basically just an inexpensive work knife.Thank you for explaining it to me Dean!!! I'm unfamiliar with Queens except for their Winchester/Case models

-
A peanut is a small or "miniature" jack knife. A Barlow is a "bare head" (bolster only on the cap end) jack knife. Traditionally, a Barlow was made as an inexpensive knife (or "peasant knife") for the masses, with cheap build quality. Typically you will find that the blade steel is thin and the scales are mostly unfinished on a traditional Barlow. A peanut typically has a higher quality finish and is bolstered on both ends, so it's not really related to the Barlow.
@dks said:
GEC tends to do that and being dominant with knife nuts it can. Bullnose is a sodbuster, for example.
Elephant toe nail - sunfish can be the same size and styleMost of this is just a way to differentiate one brand vs. another. Queen call their sodbuster a "country cousin", for example. Though the term "peanut" is a universal one, it has been associated mostly with Case over the years, as has "sodbuster", which is really just another term for a farmer.
@dks said:
Jack knife is used as a general term for many styles"Jack knife" is a general term, but it always describes a knife with one or more blades that hinge on the same end of the knife. You will never see knives that have blades that fold on both ends of the knife (such as a muskrat, stockman, moose, etc.) termed as a jack knife.
"Improved" or "modified" typically refers to a design change that differentiates that particular pattern from standard. For example, a Muskrat that is modified or improved might have 2 springs, where the typical design of a Muskrat only has one.
-
I never knew any of that......
-
I modified my post and added a couple things while you were replying. This is good discussion. We should probably start a new thread on slipjoint terminology. It can certainly be confusing.
-
/topic/55891
these threads may help
-
With GEC it get more complicated.
My GEC #68 is a called Pony Jack, it is a 2 blade jack knife
There's also a #68 WHITE OWL which has a main blade on one end and the smaller blade on the other end.
The #68 BUCKAROO is a 3 blade similar to a stockman but the same frame shape as the other two.I'm glad I don't collect GEC's I'd never be able to keep up with whats what.
-
-
@Dean51 said:
With GEC it get more complicated.
My GEC #68 is a called Pony Jack, it is a 2 blade jack knife
There's also a #68 WHITE OWL which has a main blade on one end and the smaller blade on the other end.
The #68 BUCKAROO is a 3 blade similar to a stockman but the same frame shape as the other two.I'm glad I don't collect GEC's I'd never be able to keep up with whats what.
Yeah, the #66 Stockman is called a Calf Roper. Hey, they can call them what they want!
The #66 refers to the equal-end medium serpentine frame. In that frame, there is a stockman, a moose, a jack, a "mink skinner" (muskrat) and probably a few other models.GEC patterns: http://greateasterncutlery.net/blog/patterns/
-
I expressed an interest in whittling and my girlfriend got my this Case wharncliffe whittler in black G10, I like it a lot it's pretty classy. A couple day early birthday present.

-
@Pile Driver said:
I expressed an interest in whittling and my girlfriend got my this Case wharncliffe whittler in black G10, I like it a lot it's pretty classy. A couple day early birthday present.Nice Seahorse!!

I've been meaning to pick one of these up.
-
-
-
Wow!!! What a difference!!! That color looks great!!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



