Bummed out...
-
Is that the real para2 or a ganzo?
-
@gdoolittle said:
I moved the clip to tip up carry, then decided that i liked tip down better. Before I moved it back i did notice a little bit of play in the clip. When I moved the clip back i attached the clip fairly snug but not too tight. I couldnt get the play in the clip to go away so i kept tightening and loosening trying to make sure all of the screws were the same tightness. After this i did overtighten the screws in an effort to keep the clip still and stripped them as well. I have removed them now and ordered new screws. The stripping and overtightening is my fault as you said capn but before anything was overtightened it still would not sit correctly. I should have been more patient, but I am pretty surprised at how easy they were to screw up (no pun intended). Hopefully the new screws work out wellSent from my iPhone using Tapatalk
That is a bummer. I would highly suggest getting a new clip to go with the new scales. It could have possibly been the clip causing the issue. If the portion of the clip with the screw holes drilled in it is not perfectly flat it can cause the tightening of one screw to lift the others slightly. When dealing with such delicate threads this can be a major issue and strip out the thread in the holes.
-
@captain spaulding said:
@gdoolittle said:
I moved the clip to tip up carry, then decided that i liked tip down better. Before I moved it back i did notice a little bit of play in the clip. When I moved the clip back i attached the clip fairly snug but not too tight. I couldnt get the play in the clip to go away so i kept tightening and loosening trying to make sure all of the screws were the same tightness. After this i did overtighten the screws in an effort to keep the clip still and stripped them as well. I have removed them now and ordered new screws. The stripping and overtightening is my fault as you said capn but before anything was overtightened it still would not sit correctly. I should have been more patient, but I am pretty surprised at how easy they were to screw up (no pun intended). Hopefully the new screws work out well
Sent from my iPhone using Tapatalk
That is a bummer. I would highly suggest getting a new clip to go with the new scales. It could have possibly been the clip causing the issue. If the portion of the clip with the screw holes drilled in it is not perfectly flat it can cause the tightening of one screw to lift the others slightly. When dealing with such delicate threads this can be a major issue and strip out the thread in the holes.
On the bright side i think my threads in the knife itself are still ok. I did order a short low ride clip to try out as well.

Sent from my iPhone using Tapatalk
-
I much prefer the look of that clip. That'll be very nice, hope works out just fine

-
Sorry GD - Gotta ask this - In the video - Are you fiddling with you knife, making a quick video - At the same time as driving ???
........... If so
If not please accept my apologies
-
@Huntsman said:
Sorry GD - Gotta ask this - In the video - Are you fiddling with you knife, making a quick video - At the same time as driving ???
........... If so
If not please accept my apologies
If memory serves me well I was stopped waiting on traffic. I may have started moving at the end of the video.
Sent from my iPhone using Tapatalk
-
I use the Leatherman flat bit with just my fingers to work on those tiny screws, so no way I could overtighten and strip them.
-
New screws and clip came in today! Glad to have it fixed

Sent from my iPhone using Tapatalk
-
Looks great!
Tip up for life. Lol.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login