Official MTO SEPTEMBER - ALL REBAR CHALLENGE
-
@powernoodle said:
<u>Powernoodle Day 21</u>
I have recurrent flirtations with traditional knives, as they have a certain aesthetic appeal not found in modern designs. But then the practical side of my brain reminds me that a Victorinox Compact has 10x the utility of a Case pen knife.The Vic compact knives do have more capabilities but those Case pen knives have that old school cool factor. Love the older style Case, Buck and Scrade Old Timer knives before Schrade became Chinese made.
Sent from my iPhone using Tapatalk
-
The Buck traditionals are Chinese too.
That Case is one gorgeous little knife though. I'd be proud to carry it.Day 21
Noticed one of the bolts that holds an outdoor light fixture to the wall was loose, so I used the Rebar to tighten it. I can't figure out how a bolt that never gets removed managed to back itself out. Maybe the heat?
-
Some great shots today so far everyone


-
@Aberdrew13 said:
My biggest objection is the lack of locking blades....I guess it depends on how one uses a knife. Our fathers and grandfathers, the WWII generation and their predecessors, all managed to live their lives with slipjoints and intact fingers. If I use every blade as if it were a slipjoint, its never going to fold on my fingers irrespective of whether it has a lock. It forces me to slow down a little, have my mind present in the moment, and exercise more care. I use blades to slice - and that's it. I don't dig, twist, pry or exert forces on the spine of a folding knife. But some people do, and that's where a locking blade or fixed blade would be appropriate. I've cut myself many times over the years, but its never been for lack of a locking blade. Its usually because I've been in a hurry, and ignored the basic safety rules of cutting away from your body, etc.
-
@Alan K. said:
The Buck traditionals are Chinese too.
That Case is one gorgeous little knife though. I'd be proud to carry it.Day 21
Noticed one of the bolts that holds an outdoor light fixture to the wall was loose, so I used the Rebar to tighten it. I can't figure out how a bolt that never gets removed managed to back itself out. Maybe the heat?
It's the pixies, they come in the night and loosen your nuts :D
-
@pitbullz4me said:
but those Case pen knives have that old school cool factor.No question about it. There are plenty of guys who have sold all of their "modern" design and carry only traditional knives. I totally get it. Its all about appreciating the history, remembering how Papaw used to do it, and slowing down and enjoying the experience. With a modern folder, I can flick it open and do the job before I even know what happened. That's good on the job site, if you have a lot of work to do or in a theoretical defensive scenario. But there is also some value in enjoying the aesthetic side of bladework, and slowing down to appreciate the polished bolsters, jigged bone covers and the cutting experience. I generally reside in the modern folder world, but occasionally retreat to traditional folders to slow down a little and reset my brain.
-
@Aberdrew13 said:
My biggest objection is the lack of locking blades....I guess it depends on how one uses a knife. Our fathers and grandfathers, the WWII generation and their predecessors, all managed to live their lives with slipjoints and intact fingers. If I use every blade as if it were a slipjoint, its never going to fold on my fingers irrespective of whether it has a lock. It forces me to slow down a little, have my mind present in the moment, and exercise more care. I use blades to slice - and that's it. I don't dig, twist, pry or exert forces on the spine of a folding knife. But some people do, and that's where a locking blade or fixed blade would be appropriate. I've cut myself many times over the years, but its never been for lack of a locking blade. Its usually because I've been in a hurry, and ignored the basic safety rules of cutting away from your body, etc.
I can't remember ever being cut by a knife folding closed on me during use, but I have had them fold up on me. I also typically just need a single blade, and if there are others, they don't get used, unless there's a specific task that the extra blade is much better suited for
-
DAY 21 .. LongHorn Steakhouse
Outlaw 18oz Steak



-
@Obi1shinobee said:
DAY 21 .. LongHorn Steakhouse
Outlaw 18oz Steak

:o What a steak Obi1
That looks so tasty 

-
@pitbullz4me said:
but those Case pen knives have that old school cool factor.No question about it. There are plenty of guys who have sold all of their "modern" design and carry only traditional knives. I totally get it. Its all about appreciating the history, remembering how Papaw used to do it, and slowing down and enjoying the experience. With a modern folder, I can flick it open and do the job before I even know what happened. That's good on the job site, if you have a lot of work to do or in a theoretical defensive scenario. But there is also some value in enjoying the aesthetic side of bladework, and slowing down to appreciate the polished bolsters, jigged bone covers and the cutting experience. I generally reside in the modern folder world, but occasionally retreat to traditional folders to slow down a little and reset my brain.
I carry pretty much SAKs now always but if I was going to carry a knife that was just a knife I would always carry a traditional slip joint
That is what I always carried before I started carrying SAKs and what most everyone I know carries with the exception of a few that have moved on to some of the more modern folders 
-
@Alan K. said:
The Buck traditionals are Chinese too.
That Case is one gorgeous little knife though. I'd be proud to carry it.Day 21
Noticed one of the bolts that holds an outdoor light fixture to the wall was loose, so I used the Rebar to tighten it. I can't figure out how a bolt that never gets removed managed to back itself out. Maybe the heat?
Some Buck knives are but 80% are still made here in the US. The knife in the picture took me back to when everyone carried a "pocket knife". I'm not a knife expert but I thought Schrade sold out before any Buck knives were made in China. That's why I said I loved the older style of what I call a pocket knife.
Sent from my iPhone using Tapatalk
-
Day 21 Rebar Challenge
The third day of rain again finds me with not a lot of tasks for the Rebar.
The discussion of pocket knives inspired my pic for today. This is "my" most valuable knife. It was owned by my grandfather, who raised me from a young child, a WW2 vet and life long farmer. My grandmother gave me this shortly after his death in 2002. I'm not sure if the exact age, but I know it dates at least until the late 1960s. He carried this knife everyday even though he had others he received as gifts. If any knife has put in work this knife has. He truly used it for everything and it shows. One blade is broken and the tip is gone from the main blade. It is a Colonial knife made here in the states.

Sent from my iPhone using Tapatalk
-
21/30 rebar
About to de flash this spork which will be accompanying me and my lunch box.
-
@pitbullz4me said:
Day 21 Rebar ChallengeThe third day of rain again finds me with not a lot of tasks for the Rebar.
The discussion of pocket knives inspired my pic for today. This is "my" most valuable knife. It was owned by my grandfather, who raised me from a young child, a WW2 vet and life long farmer. My grandmother gave me this shortly after his death in 2002. I'm not sure if the exact age, but I know it dates at least until the late 1960s. He carried this knife everyday even though he had others he received as gifts. If any knife has put in work this knife has. He truly used it for everything and it shows. One blade is broken and the tip is gone from the main blade. It is a Colonial knife made here in the states.

Sent from my iPhone using Tapatalk
Good honest wear on that one

-
Day 21 Rebar Challenge
The third day of rain again finds me with not a lot of tasks for the Rebar.
The discussion of pocket knives inspired my pic for today. This is "my" most valuable knife. It was owned by my grandfather, who raised me from a young child, a WW2 vet and life long farmer. My grandmother gave me this shortly after his death in 2002. I'm not sure if the exact age, but I know it dates at least until the late 1960s. He carried this knife everyday even though he had others he received as gifts. If any knife has put in work this knife has. He truly used it for everything and it shows. One blade is broken and the tip is gone from the main blade. It is a Colonial knife made here in the states.

Sent from my iPhone using Tapatalk
Good honest wear on that one

Thanks Steve
Sent from my iPhone using Tapatalk
-
@Obi1shinobee said:
DAY 21 .. LongHorn Steakhouse
Outlaw 18oz Steak

Mmmmmmm!!

-
ReamerPunch Rebar Challenge September - Day 22

Apparently my trolley bag was not enough, and my friend needs more luggage to move.
I had this huge trolley bag, but the legs had broken off, so I improvised.


Yep, it can stand now. Not pretty, but it worked.

-
-
@Obi1shinobee said:
October 2 layers MTO Official Challenge host by hiraethus /topic/68346
November All 111 mm Challenge host by Obi1shinobee
December Spirit Challenge host by Obi1shinobeeHow about a Mini Tool Challenge?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


