Yud makes knives
-
So about two weeks ago I got it in my head that it was time to try and make a knife. When it comes to hand forging something knives have a high degree of difficulty, in part due to the shape and because the extra steps (mainly heat treating).
So after a fair amount of debate I got a 2"x18"x3/16" bar of 1095 from the SMKW, odd with shipping they had the best price. Once it came I cut a piece off with an angel so the long side was 6" and the short was 4" then got to work with my hammer. First drawing it out so it was long with a spike, to be made into a handle.
This is at the end of day one with what the material started out as.

End of day one, I had planned on one more heat (to define where the blade ended) after taking the picture above, but then all the visitors we had came into the shop at once and so I ended up doing more work then planned.

Second day I finished up the shape, making the handle and thinking out the edge. Came out with a few problems, the fixable problem was the hook that acts as a guard poked everyone's middle finger, the angle was adjusted to fix the problem. The blade problems were left. The taper going to the edge is uneven on the two sides, one is a smooth wedge from spine to edge, the other is flat along the spine. The curve also got out of hand, and by the time a noticed it was too late to straighten, also I thought it looked good. The problem was that I used my ball peen which spreads material out in all directions (you can see the problem) and worked on the all ready shaped side, the proper thing to do was use the cross peen (which has a narrow peen (backside of the hammer) the full width of the hammer head) which moves material forwards and back also work on the straight side that way the natural curve moves the point towards the centerline of the knife.


Over the weekend I cleaned up the blade with a file and sandpaper, also straightened the edge, it had slight wave to it. Left it with a sort of Dalmatian look due to some deep hammer marks.
Back at work I did the heat treat, did the quench I used motor oil donated by the friend at work. Managed to do it without fire or hurting anyone. Tempered the blade in the oven at home then worked on re-cleaning blade and sharpening.

I used it to make dinner chopping onions and Brussels sprouts, no where near the best knife I've used but it worked.

-
Nice utility knife. I quite like that curved blade.
My father forged one same style for my wife recently. He made a needle to go with it.
-
Pretty cool. I bet that sucker could throw some wicked sparks from a ferro or flint.
-
That looks great Yud and loving the glimpses of your workshop


-
Nice!

-
That is just awesome! Have you tried making any steel strikers?
-
Cool and keep practising!

-
Nice job

-
@ducttapetech said:
That is just awesome! Have you tried making any steel strikers?No I haven't tried. Looking at it I need some hi carbon steel in round or square stock, trying to draw down the stuff I have would be a major pain.
Thanks everyone.
Right now I am trying to finish my second knife, the ram horn handle is giving me a fight (lucky we have ferrier's rasp at work that should show it who's boss).

-
Cool stuff Yud. I'm super jealous of your job

-
Very cool Yud
I really like how the handle curves like that as well 
-
So I finished the second one, with some lovely ram horn scales.
Thanks Poncho and Slaughter,


-
Very cool Yud 8)

-
My latest knife. The steel is 1084 and bocote handle (which feels perfect in the hand). Also Ordinance Sergeant stripes for the sheath because why not.

-
-
Nice work Yud and the Bocote looks really good

-
Thank you both, and falling in love with working with bocote. The sawdust has such a nice spiced smell to it.
-
I think I might finally be getting it down. 1084 blade, mild steel guard with forged finish, elk antler handle.
If anyone is interested, the way I finished the guard was grinding it smooth, then using a campfire to get it red hot then quenched in canola oil. The result is a nice smooth part with a rich dark color.
-
Looks nice Yud!
-
Wow! Nice work Yud.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

