Help ID older SAK!
-
Have the same knife (tang stamp might be different, have to check). But same grip pattern, same old cross, brass liners. It's a cool one.
I'd probably grind the top edge down slightly to meet the new, upward-ground bottom edge, and then try to really polish the top nicely so it looks like nothing was done to it. But there are so many different shapes of blades it's kinda up to personal taste.
Cool SAK tho. I bought mine in a 3 knife lot and was planning to sell it but decided to keep it.
-
I think I would leave the top and grind it from the bottom. I usually use a fine tip sharpie and draw the lines out to see how it will look before I reprofile. The small v on the victorinox stamping places it 1975-85 unless it has an Elinox stamp on the opposite side then it's older.
-
When repro filing the tip don't take it all off the bottom in this case. You'll need to take some of the top as well or the sharp tip will be too high and exposed. It will catch on your pocket and things and can cut you... ask me how I know 😊
-
Good advise there ^^^^

I hadn't thought of that

-
Three OC Pioneers. One original profile blade and a couple of "repaired" blades, neither reprofiled by myself.
The middle blade is the one I mentioned with the tip being too high. If it was a regular carry knife I would take a little off the blade's spine but it lives in my display case so it can stay as is. the semi-sheepfoot (top) is quite a good profile but I prefer to stay with a spear point if at all possible.
On a side note... the Elinox tang stamp is on the front side of the blade, the VSSR stamp is on the reverse for Elinox knives.
-
@PTRSAK said:
Three OC Pioneers. One original profile blade and a couple of "repaired" blades, neither reprofiled by myself.
The middle blade is the one I mentioned with the tip being too high. If it was a regular carry knife I would take a little off the blade's spine but it lives in my display case so it can stay as is. the semi-sheepfoot (top) is quite a good profile but I prefer to stay with a spear point if at all possible.
On a side note... the Elinox tang stamp is on the front side of the blade, the VSSR stamp is on the reverse for Elinox knives.
Can anyone give a try for the real old one in my avi please- sorry for the crudy pic...
-
Three OC Pioneers. One original profile blade and a couple of "repaired" blades, neither reprofiled by myself.
The middle blade is the one I mentioned with the tip being too high. If it was a regular carry knife I would take a little off the blade's spine but it lives in my display case so it can stay as is. the semi-sheepfoot (top) is quite a good profile but I prefer to stay with a spear point if at all possible.
On a side note... the Elinox tang stamp is on the front side of the blade, the VSSR stamp is on the reverse for Elinox knives.
Can anyone give a try for the real old one in my avi please- sorry for the crudy pic...
Victorinox Gourmet I'd say, pre 1973: http://www.sakwiki.com/tiki-index.php?page=Gourmet
-
Three OC Pioneers. One original profile blade and a couple of "repaired" blades, neither reprofiled by myself.
The middle blade is the one I mentioned with the tip being too high. If it was a regular carry knife I would take a little off the blade's spine but it lives in my display case so it can stay as is. the semi-sheepfoot (top) is quite a good profile but I prefer to stay with a spear point if at all possible.
On a side note... the Elinox tang stamp is on the front side of the blade, the VSSR stamp is on the reverse for Elinox knives.
Can anyone give a try for the real old one in my avi please- sorry for the crudy pic...
Victorinox Gourmet I'd say, pre 1973: http://www.sakwiki.com/tiki-index.php?page=Gourmet
Thanks Gourmet buddy- but it was that old @50 years ago when I was a kid. Def pre 73! It has an awl on the outside and a little bale thats hard to see here. :)
-
Three OC Pioneers. One original profile blade and a couple of "repaired" blades, neither reprofiled by myself.
The middle blade is the one I mentioned with the tip being too high. If it was a regular carry knife I would take a little off the blade's spine but it lives in my display case so it can stay as is. the semi-sheepfoot (top) is quite a good profile but I prefer to stay with a spear point if at all possible.
On a side note... the Elinox tang stamp is on the front side of the blade, the VSSR stamp is on the reverse for Elinox knives.
Can anyone give a try for the real old one in my avi please- sorry for the crudy pic...
Victorinox Gourmet I'd say, pre 1973: http://www.sakwiki.com/tiki-index.php?page=Gourmet
Thanks Gourmet buddy- but it was that old @50 years ago when I was a kid. Def pre 73! It has an awl on the outside and a little bale thats hard to see here. :)
How about some better pics.

-
[quote author=PTRSAK link=topic=68635.msg1354713#msg1354713 date=1475219235]
Three OC Pioneers. One original profile blade and a couple of "repaired" blades, neither reprofiled by myself.
The middle blade is the one I mentioned with the tip being too high. If it was a regular carry knife I would take a little off the blade's spine but it lives in my display case so it can stay as is. the semi-sheepfoot (top) is quite a good profile but I prefer to stay with a spear point if at all possible.
On a side note... the Elinox tang stamp is on the front side of the blade, the VSSR stamp is on the reverse for Elinox knives.
Can anyone give a try for the real old one in my avi please- sorry for the crudy pic...
Victorinox Gourmet I'd say, pre 1973: http://www.sakwiki.com/tiki-index.php?page=Gourmet
Thanks Gourmet buddy- but it was that old @50 years ago when I was a kid. Def pre 73! It has an awl on the outside and a little bale thats hard to see here. :)
How about some better pics.

[/quote]
Its a phone, I'll try! Thanks for asking... -
Try this

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
