Official MTO SEPTEMBER - ALL REBAR CHALLENGE
-
@pitbullz4me said:
Still carrying it out of habit but I started about 2 weeks before the challenge began. Now that the challenge is over I might put a pair of scissors in sooner or laterI will carry my Rebar going forward for most of my work day purposes. I liked using my ST300 during the July challenge, that really proved to me a MT was a viable solution for me. It was heavy, and my suspenders were requiring frequent adjustments.
Then the Rebar was selected and it did not miss a beat.
If memory serves me correctly, the one tool I did not use during the challenge was the opener.
Guess what, day 31 - Rebar opener was implemented to remove caps from 2 ice cold IBC Root Beers at a local apple festival my wife and I took in today. Sorry, tool with me but not my phone, so no action shot.
For me SCISSORS are not a want on my Rebar, as I also carry a Micra.
The only tool I would change in the future is the file.For me the Rebar is that tool that is presently 'just right', yet I will keep and eye out for that better tool in my future.
Sent from my iPhone using Tapatalk
-
Still carrying it out of habit but I started about 2 weeks before the challenge began. Now that the challenge is over I might put a pair of scissors in sooner or later
Sent from my iPhone using Tapatalk
I'm still carrying mine as well, along with the vic pioneer. I'll go back to my surge during the day for work though.
I carried the surge a lot prior to getting the rebar. I've enjoyed the lighter rebar to the point I don't think I'll carry the surge as much in the future. The challenge did make me rethink my edc and its weight.
Sent from my iPhone using Tapatalk
-
Still carrying it out of habit but I started about 2 weeks before the challenge began. Now that the challenge is over I might put a pair of scissors in sooner or later
I will carry my Rebar going forward for most of my work day purposes. I liked using my ST300 during the July challenge, that really proved to me a MT was a viable solution for me. It was heavy, and my suspenders were requiring frequent adjustments.
Then the Rebar was selected and it did not miss a beat.
If memory serves me correctly, the one tool I did not use during the challenge was the opener.
Guess what, day 31 - Rebar opener was implemented to remove caps from 2 ice cold IBC Root Beers at a local apple festival my wife and I took in today. Sorry, tool with me but not my phone, so no action shot.
For me SCISSORS are not a want on my Rebar, as I also carry a Micra.
The only tool I would change in the future is the file.For me the Rebar is that tool that is presently 'just right', yet I will keep and eye out for that better tool in my future.
Sent from my iPhone using Tapatalk
I'm with you on that. I carried a Pioneer X during the first 10 days of the challenge but left it at home during vacation. I kept the Rebar sharp to the point it handled all my cutting tasks. I just figured scissors would make the Rebar more complete.
I also agree the Rebar file is very lacking for a file. I don't know what other Leatherman file would fit off the top of my head, but I'd like a Charge/Wave style file it it would fit.
Sent from my iPhone using Tapatalk
-
@kaput said:
But first. A couple thoughts. So, the good ol'Rebar :D This has to be among my favorite Leatherman multitools. The tool load out is really great for me, and the size and form factor is so easy to carry everywhere whether it's in a pocket, pack or tossed in my van (down by the river).Here's a couple thoughts I have. Feel free to comment with yours:
Pros.
-awl, every multitool in my opinion/use needs an awl
-blade shapes, I like both SE and PE
-file, the cross hatched side is good (not great)
-drivers, the flats and philips are all great, good selection. Seems to cover everything I come across
-replaceable hard wire cutters
-wire stripper
-sheath availability/variety
-ease of modification and compatibility
-overall shape and size
-weightCons.
-awl, needs a sharper point imo
-overall precision of hard wire cutters
-file, the single hatched side dosent seem to be good for much
-can opener/cap lifterOverall satisfaction with the Leatherman Rebar is a solid 8/10 &

Overall thoughts. I'm going to continue to keep the rebar as my number one go to edc plier based multitool.
Speaking to the con of the awl not being sharp enough, I'm not sure about that. Here is a pic of the awl puncturing an aluminum beer can with ease. We were goofing around after vacation and a friend wanted to shotgun a beer. The awl barely touched the aluminum before it punctured it. This pic didn't make the cut for my daily pic, but here it is a bonus pic from Day 17 lol

Sent from my iPhone using Tapatalk
-
I thought the awl and the medium screwdriver needed some improvement.
</post/1143411>
Then there is the file mod
</post/1309095>
-
But first. A couple thoughts. So, the good ol'Rebar :D This has to be among my favorite Leatherman multitools. The tool load out is really great for me, and the size and form factor is so easy to carry everywhere whether it's in a pocket, pack or tossed in my van (down by the river).
Here's a couple thoughts I have. Feel free to comment with yours:
Pros.
-awl, every multitool in my opinion/use needs an awl
-blade shapes, I like both SE and PE
-file, the cross hatched side is good (not great)
-drivers, the flats and philips are all great, good selection. Seems to cover everything I come across
-replaceable hard wire cutters
-wire stripper
-sheath availability/variety
-ease of modification and compatibility
-overall shape and size
-weightCons.
-awl, needs a sharper point imo
-overall precision of hard wire cutters
-file, the single hatched side dosent seem to be good for much
-can opener/cap lifterOverall satisfaction with the Leatherman Rebar is a solid 8/10 &

Overall thoughts. I'm going to continue to keep the rebar as my number one go to edc plier based multitool.
Speaking to the con of the awl not being sharp enough, I'm not sure about that. Here is a pic of the awl puncturing an aluminum beer can with ease. We were goofing around after vacation and a friend wanted to shotgun a beer. The awl barely touched the aluminum before it punctured it. This pic didn't make the cut for my daily pic, but here it is a bonus pic from Day 17 lol

Sent from my iPhone using Tapatalk
Great action shot btw!
I think I meant angel, not point. Ala the Alox awl or violently sharp and pointy SOG awl. Where as if you make a hole with the leatherman awl you'll be left with a mangled big ol hole. Of course this is subject to my opinion.
or 
-
I thought the awl and the medium screwdriver needed some improvement.
</post/1143411>
Then there is the file mod
</post/1309095>
Yes SteveC. The refined awl, much more effective for intended use isn't it

I need to look into and mod those.
Scissor/Awl FTW

It seems like that other half of the scissor piece could get in the way or at least operate a little awkward when using the awl? Really depends I guess on what you're using it for.
-
But first. A couple thoughts. So, the good ol'Rebar :D This has to be among my favorite Leatherman multitools. The tool load out is really great for me, and the size and form factor is so easy to carry everywhere whether it's in a pocket, pack or tossed in my van (down by the river).
Here's a couple thoughts I have. Feel free to comment with yours:
Pros.
-awl, every multitool in my opinion/use needs an awl
-blade shapes, I like both SE and PE
-file, the cross hatched side is good (not great)
-drivers, the flats and philips are all great, good selection. Seems to cover everything I come across
-replaceable hard wire cutters
-wire stripper
-sheath availability/variety
-ease of modification and compatibility
-overall shape and size
-weightCons.
-awl, needs a sharper point imo
-overall precision of hard wire cutters
-file, the single hatched side dosent seem to be good for much
-can opener/cap lifterOverall satisfaction with the Leatherman Rebar is a solid 8/10 &

Overall thoughts. I'm going to continue to keep the rebar as my number one go to edc plier based multitool.
Speaking to the con of the awl not being sharp enough, I'm not sure about that. Here is a pic of the awl puncturing an aluminum beer can with ease. We were goofing around after vacation and a friend wanted to shotgun a beer. The awl barely touched the aluminum before it punctured it. This pic didn't make the cut for my daily pic, but here it is a bonus pic from Day 17 lol

Sent from my iPhone using Tapatalk
Great action shot btw!
I think I meant angel, not point. Ala the Alox awl or violently sharp and pointy SOG awl. Where as if you make a hole with the leatherman awl you'll be left with a mangled big ol hole. Of course this is subject to my opinion.
or 
I was just saying that the awl seems sharp to me in my "field testing " lol. I love this site though, nobody in real life likes to talk multi tools with me. Glad I found this place now I know I'm not the only person that likes these.
That's part of the Rebar's charm, you can customize any way that suits your needs. A different awl or scissors or whatever you want is doable
Sent from my iPhone using Tapatalk
-
I thought the awl and the medium screwdriver needed some improvement.
</post/1143411>
Then there is the file mod
</post/1309095>
Yes SteveC. The refined awl, much more effective for intended use isn't it

I need to look into and mod those.
Scissor/Awl FTW

It seems like that other half of the scissor piece could get in the way or at least operate a little awkward when using the awl? Really depends I guess on what you're using it for.
I find you lack of Faith on Scissor/awl

-
[quote author=SteveC link=topic=67876.msg1355544#msg1355544 date=1475357537]
I thought the awl and the medium screwdriver needed some improvement.</post/1143411>
Then there is the file mod
</post/1309095>
Yes SteveC. The refined awl, much more effective for intended use isn't it

I need to look into and mod those.
Scissor/Awl FTW

It seems like that other half of the scissor piece could get in the way or at least operate a little awkward when using the awl? Really depends I guess on what you're using it for.
I find you lack of Faith on Scissor/awl

[/quote]
Hahaha
No no. I am just an awl affecianado. I appreciate them awl (pun intended). But always want juuuust the right one...
-
[quote author=kaput link=topic=67876.msg1355558#msg1355558 date=1475360030]
[quote author=SteveC link=topic=67876.msg1355544#msg1355544 date=1475357537]
I thought the awl and the medium screwdriver needed some improvement.</post/1143411>
Then there is the file mod
</post/1309095>
Yes SteveC. The refined awl, much more effective for intended use isn't it

I need to look into and mod those.
Scissor/Awl FTW

It seems like that other half of the scissor piece could get in the way or at least operate a little awkward when using the awl? Really depends I guess on what you're using it for.
I find you lack of Faith on Scissor/awl

[/quote]
Hahaha
No no. I am just an awl affecianado. I appreciate them awl (pun intended). But always want juuuust the right one...
[/quote]:) Scissor/Awl work like any other Awl.. I like it. more room to put other stuff in MT

-
I thought the awl and the medium screwdriver needed some improvement.
</post/1143411>
Then there is the file mod
</post/1309095>
Yes SteveC. The refined awl, much more effective for intended use isn't it

I need to look into and mod those.
Scissor/Awl FTW

Cool idea!!!!

-


Hahaha, right?!

-
so who won the draw

-
September Draw

01 - Poncho65
02 - Kevin Davey
03 - Aberdrew13
04 - ReamerPunch
05 - Alan K.
06 - powernoodle
07 - pitbullz4me
08 - Monrogue
09 - LoopCutter
10 - kaput
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

