And so it begins.... (My adventures into Alox!)
-
I don't do too much 93mm work any longer for cost reasons mostly. To build a 93mm custom always takes more than 1 donor sak for springs tools etc... 91mm I can just convert as is.
Interestingly on this one the customer was willing to pay extra for a normal nick pair of scissors even though I used a pioneer x for the donor. I also have to weaken the springs that come with those to use in modded knives as they are ridiculously strong when the pin through them is rigid and not bent like a stock x. I really wish they had done a better job on the x model.





-
And here is a smooth Ti scaled 91mm compact tinker with matching tumbled Ti liner.





-
NICE!

JR -
Those are both great looking knives there! The tumbled liner is an interesting addition.
Despite the general lack of phillips on stock models, do most of your custom requests ask for a phillips? I've always though it should be included on more factory models.
-
@s1xty7 said:
Those are both great looking knives there! The tumbled liner is an interesting addition.Despite the general lack of phillips on stock models, do most of your custom requests ask for a phillips? I've always though it should be included on more factory models.
Super tinkers are requested at about a 9:1 ratio to climbers. I have approx 500 brand new corkscrews here... I can't think of what to do with them other than make a large tribal necklace to show the number of SAKs slain in battle. :D
-
Love the tumbled liners matching the scales!
-
@Syph007 said:
Super tinkers are requested at about a 9:1 ratio to climbers. I have approx 500 brand new corkscrews here... I can't think of what to do with them other than make a large tribal necklace to show the number of SAKs slain in battle. :DThat is quite the ratio!! I wonder if you could sell them back to Victorinox in bulk. "Hey, I'll trade you 500 corkscrews for 50 Super Tinkers" or some such thing. Short of that, you could start making tires with corkscrews for studs. Hah! Or maybe pair the corkscrew with the fish scaler for a custom "Fish and Wine" compact tool.
-
Wow Syph :o I am always blown away by your work buddy
Every one I see is another one that I want
I have a list of wants on a knife that I will have you someday make but I am still getting ideas and want it to be as close to perfect for me as possible :D -
Hey Syph, any elegant solution on the eyeglass screwdriver?
Can you add tweezers on the original alox scales of the Pioneer?
I am dreaming of a Pioneer with scissors, pliers and tweezers, or an upgraded deluxe tinker with the eyeglass screwdriver and fully serrated main blade from the serrated Spartan ( weekender) -
I havent been doing too many new models, just producing mostly standard stuff so I havent bothered to post it all.
The blue tiox super tinkers are very popular. Here is one that went together this morning.






-
And as well a diamond textured explorer... no plastic like its should be. :D





-
Slick

I know they make them small enough but I wonder if they make a compass thin enough to fit in rather the a mag glass?
JR -
@MadPlumbarian said:
Slick
I know they make them small enough but I wonder if they make a compass thin enough to fit in rather the a mag glass?
JRIve searched for one thin enough to fit in a scale and so far no luck.
-
Slick

I know they make them small enough but I wonder if they make a compass thin enough to fit in rather the a mag glass?
JRIve searched for one thin enough to fit in a scale and so far no luck.
Bummer, I think that would be cool to have a compass in the magnifying glass..
JR -
Beautiful as always! Really digging the influx of blue tiox!

-
Syph, have you considered doing the corkscrew eyeglass screwdriver handle milled from a nice wood, but same design as the Vic one? Would seem like a simple and quite elegant solution, or is there a flaw in this idea (other than it would only work for SAKs with the corkscrew)?
Would look a damn site better than the Vic grey plastic one on your beautiful designs.
Or natural black rubber, maybe.
-
@Oxford_Guy said:
Syph, have you considered doing the corkscrew eyeglass screwdriver handle milled from a nice wood, but same design as the Vic one? Would seem like a simple and quite elegant solution, or is there a flaw in this idea (other than it would only work for SAKs with the corkscrew)?Would look a damn site better than the Vic grey plastic one on your beautiful designs.
Or natural black rubber, maybe.
The difficulty with wood is that somewhere you are going to have a very narrow section with the grain running across it, which will likely be too weak. Possible with lignum vitae or jarrah perhaps.
-
Syph, have you considered doing the corkscrew eyeglass screwdriver handle milled from a nice wood, but same design as the Vic one? Would seem like a simple and quite elegant solution, or is there a flaw in this idea (other than it would only work for SAKs with the corkscrew)?
Would look a damn site better than the Vic grey plastic one on your beautiful designs.
Or natural black rubber, maybe.
The difficulty with wood is that somewhere you are going to have a very narrow section with the grain running across it, which will likely be too weak. Possible with lignum vitae or jarrah perhaps.
OKay... What other non-plastic materials would work well and be in-keeping with Syph's creations? I like the idea of retaining the corkscrew driver, but with a nicer material than grey plastic
-
BTW what size Torx screws does Syph use on his customs?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login