And so it begins.... (My adventures into Alox!)
-
Slick

I know they make them small enough but I wonder if they make a compass thin enough to fit in rather the a mag glass?
JRIve searched for one thin enough to fit in a scale and so far no luck.
Bummer, I think that would be cool to have a compass in the magnifying glass..
JR -
Beautiful as always! Really digging the influx of blue tiox!

-
Syph, have you considered doing the corkscrew eyeglass screwdriver handle milled from a nice wood, but same design as the Vic one? Would seem like a simple and quite elegant solution, or is there a flaw in this idea (other than it would only work for SAKs with the corkscrew)?
Would look a damn site better than the Vic grey plastic one on your beautiful designs.
Or natural black rubber, maybe.
-
@Oxford_Guy said:
Syph, have you considered doing the corkscrew eyeglass screwdriver handle milled from a nice wood, but same design as the Vic one? Would seem like a simple and quite elegant solution, or is there a flaw in this idea (other than it would only work for SAKs with the corkscrew)?Would look a damn site better than the Vic grey plastic one on your beautiful designs.
Or natural black rubber, maybe.
The difficulty with wood is that somewhere you are going to have a very narrow section with the grain running across it, which will likely be too weak. Possible with lignum vitae or jarrah perhaps.
-
Syph, have you considered doing the corkscrew eyeglass screwdriver handle milled from a nice wood, but same design as the Vic one? Would seem like a simple and quite elegant solution, or is there a flaw in this idea (other than it would only work for SAKs with the corkscrew)?
Would look a damn site better than the Vic grey plastic one on your beautiful designs.
Or natural black rubber, maybe.
The difficulty with wood is that somewhere you are going to have a very narrow section with the grain running across it, which will likely be too weak. Possible with lignum vitae or jarrah perhaps.
OKay... What other non-plastic materials would work well and be in-keeping with Syph's creations? I like the idea of retaining the corkscrew driver, but with a nicer material than grey plastic
-
BTW what size Torx screws does Syph use on his customs?
-
@Oxford_Guy said:
BTW what size Torx screws does Syph use on his customs?Possibly T6? I asked recently. I can check my messages to see.
Sent from my SM-G920R4 using Tapatalk
-
Yup, T6.
Sent from my SM-G920R4 using Tapatalk
-
Syph, have you considered doing the corkscrew eyeglass screwdriver handle milled from a nice wood, but same design as the Vic one? Would seem like a simple and quite elegant solution, or is there a flaw in this idea (other than it would only work for SAKs with the corkscrew)?
Would look a damn site better than the Vic grey plastic one on your beautiful designs.
Or natural black rubber, maybe.
The difficulty with wood is that somewhere you are going to have a very narrow section with the grain running across it, which will likely be too weak. Possible with lignum vitae or jarrah perhaps.
How about stabilized wood? Woulnd't that help a whole deal?
-
Syph, have you considered doing the corkscrew eyeglass screwdriver handle milled from a nice wood, but same design as the Vic one? Would seem like a simple and quite elegant solution, or is there a flaw in this idea (other than it would only work for SAKs with the corkscrew)?
Would look a damn site better than the Vic grey plastic one on your beautiful designs.
Or natural black rubber, maybe.
The difficulty with wood is that somewhere you are going to have a very narrow section with the grain running across it, which will likely be too weak. Possible with lignum vitae or jarrah perhaps.
How about stabilized wood? Woulnd't that help a whole deal?
This stuff?: http://burlsource.us/stabilized-wood-info/
Sounds good! Wood corkscrew screwdrivers would be classy! :-)
-
Syph, have you considered doing the corkscrew eyeglass screwdriver handle milled from a nice wood, but same design as the Vic one? Would seem like a simple and quite elegant solution, or is there a flaw in this idea (other than it would only work for SAKs with the corkscrew)?
Would look a damn site better than the Vic grey plastic one on your beautiful designs.
Or natural black rubber, maybe.
The difficulty with wood is that somewhere you are going to have a very narrow section with the grain running across it, which will likely be too weak. Possible with lignum vitae or jarrah perhaps.
How about stabilized wood? Woulnd't that help a whole deal?
This stuff?: http://burlsource.us/stabilized-wood-info/
Sounds good! Wood corkscrew screwdrivers would be classy! :-)
Something like this perhaps (BTW it's on sale at the moment...): http://burlsource.us/p105-figured-hawaiian-koa-stabilized-pen-turning-blocks-3-pieces/

or this: http://burlsource.us/p101-monkey-pod-hawaiian-koa-stabilized-pen-turning-blocks-3-pieces/

This one isn't on sale, but is lovely:

Think it's usually used for knife handles...
-
I was just wondering, for Syph's tumbled titanium scales that have the copper cross, does the latter go green with verdigris after some time or does the tumbling somehow slow done that process?
-
I doubt the tumbling process would affect oxidation - you are still going to get that verdigris. I've been carrying one of Bob's works of art with tumbled scales and copper cross for almost a year now with no sign of oxidation on the copper. I use it every day though - it might be different if the knife were sitting in a drawer.
-
The copper sheet I cut it from has Been in my shop for 4 years and looks dull but not green. Doesn't it have to be wet to turn green?
-
@Syph007 said:
The copper sheet I cut it from has Been in my shop for 4 years and looks dull but not green. Doesn't it have to be wet to turn green?Wet or in a brine solution. I did some copper with a patina on it and it turned blue/green. I'll try to dig up a photo and message you on how I did it if you like.
Sent from my iPhone using Tapatalk
-
Its not too many times I get to show a new configuration... but here it one. First time ever, have I done this one. Both phillips and corkscrew on the back of a SAK with only one scale cutout. ( I did this once ages ago with 2 scale cutouts).





As you can see there was just barely enough space and the phillips needed to take the space under the saw layer too, so I had to put a little stub piece in there to tension the saw spring.
-
Wow that is awesome



-
wow wow wow that really is the perfect three layer SAK.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




