October 30 day minimalist SAK challenge
-
@T14 said:
Bantam again today.
The wife wanted to tidy up and tossed my bantam and keys from the dining table to the sofa as a single handful.
Result? Scratched alox
Lesson learned. I need to dig out the sewing machine and make a bunch of slipsheaths for my babies...
-TomThat's the problem with the coloured Alox, looks great, but doesn't wear as well as the plain silver ones. I've had some little leather slips made-up for my blue alox bantam and burgundy alox Rambler, which don't add much bulk and work well - think some of my posts for previous days carry in this thread show these.
-
I miss my old Wave tremendously! I was excited to carry a SAK, thinking it could replace the Wave and be much lighter, and it is. But I miss my one hand operated knife and a few other tools...
I quite often just EDC a knife (e.g. Spyderco Pingu or Urban) and a 58mm Victorinox, so it's not been too difficult for me
The lack of one hand opening is what bugs me the most. I'm ok with basically just a blade and a few drivers/openers as tools, but deployment is so slow with a 45 year old sak. Thankfully I'm not usually in a hurry.
I also have a Leatherman Crater C33TX on the way. I already have the Crater C33X. Nice and light knife and easy to open but missed the tools. The TX adds the 2 screwdrivers plus the bottle opener/caribiner.
Once this Challenge is over, I will try carrying just that Crater and see if it fits the bill. It has a launcher on it to help one handed opening, my current Crater does not.
Sent from my Nexus 7 using Tapatalk
-
I can carry my 2 layer 111 picnicer for this challenge correct?
-
-
-
Carried the pioneer on day 6 and 7, but nothing came up except cutting a tag off my new hat. Hopefully day 8 is more exciting!
Sent from my Z988 using Tapatalk

-
Day 8...
Tinker time....

Sent from my Nexus 6 using Tapatalk
-
@jerseydevil said:
KL89 DAK today. :)
-
Quick question. I've never owned an Alox knife before. Would something like the Pioneer X be heavier than a Climber Plus?
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
<u>Day 04</u>:
(Attempting it ALL single layer!)Today the 74mm Ambassador comes through. Unlike the 2-layer 65mm Delemont Evo 81 and Executive 81, and the 58mm Classic (SD) that have the pen blade and fingernail file side by side, requiring two independent springs, the larger 74mm Ambassador has a single spring with the pen blade and fingernail file opposing each other on one side and the scissors on the other. The Ambassador's file has the pointed tip for cleaning under fingernails.
The exterior garage door opener with numeric combination keypad was not working this morning. It takes a small 12v battery that shouldn't need replacement as it hasn't been in the opener that long. The opener was on the house when I bought it 20 years ago and its plastic exterior shows a superficial surface chalking from solar UV and weather exposure, but there's no reason it shouldn't still work. With the opener exposed to the elements, even with a flip down cover, I've learned over the past two decades that at least 80% of the time, the copper battery contacts in the battery box have oxidized and need to be burnished as the oxidation does not conduct electricity very well.

First step is removing the small #1 Phillips screw that holds the cover on the battery box. The pointed fingernail file tip fits it perfectly, and the screw doesn't require high torque. For this task, the trick is not dropping the screw; finding it would be a challenge.

As I suspected, both contacts were oxidized, especially the right one. The file makes short work of the oxidation with very light pressure; just enough to abrade the surface lightly.

After burnishing the right side, I used the file to tweak the contact, spreading its fold slightly to increase contact pressure on the battery terminal. The shiny nickel or chrome battery terminals were completely clean. They didn't need any attention.

After reinstalling the battery and reassembling the battery box cover, it passed the "smoke test" with flying colors. The garage door opener is fully functional again and should be for at least a few months ;)
Who says the pointy fingernail file is useless? BAH! Washed my hands afterward, including cleaning my fingernails with the Ambassador's file tip.
John
-
@jalind said:
<u>Day 04</u>:
(Attempting it ALL single layer!)Today the 74mm Ambassador comes through. Unlike the 2-layer 65mm Delemont Evo 81 and Executive 81, and the 58mm Classic (SD) that have the pen blade and fingernail file side by side, requiring two independent springs, the larger 74mm Ambassador has a single spring with the pen blade and fingernail file opposing each other on one side and the scissors on the other. The Ambassador's file has the pointed tip for cleaning under fingernails.
The exterior garage door opener with numeric combination keypad was not working this morning. It takes a small 12v battery that shouldn't need replacement as it hasn't been in the opener that long. It was on the house when I bought it 20 years ago but there's no reason it shouldn't still work. With the opener exposed to the elements, even with a flip down cover, I've learned over the past two decades that at least 80% of the time, the copper battery contacts in the battery box have oxidized and need to be burnished as the oxidation does not conduct electricity very well.

First step is removing the small #1 Phillips screw that holds the cover on the battery box. The pointed fingernail file tip fits it perfectly, and the screw doesn't require high torque. For this task, the trick is not dropping the screw; finding it would be a challenge.

As I suspected, both contacts were oxidized, especially the right one. The file makes short work of the oxidation with very light pressure; just enough to abrade the surface lightly.

After burnishing the right side, I used the file to tweak the contact, spreading its fold slightly to increase contact pressure on the battery terminal. The shiny nickel or chrome battery terminals were completely clean. They didn't need any attention.

After reinstalling the battery and reassembling the battery box cover, it passed the "smoke test" with flying colors. The garage door opener is fully functional again and should be for at least a few months ;)
Who says the pointy fingernail file is useless? BAH! Washed my hands afterward, including cleaning my fingernails with the Ambassador's file tip.
John

-
8/30
Zertec, once again. The nail file is much better than my big, nubby fingers.

Sent from my SAMSUNG-SM-N900A using Tapatalk
-
-
Nice one Kirky.

-
-
Day 8
Carried my Executive today. The file is great for nails but it also works on soft metals. Today I've used it on both. The metal in question was the sharp points on my phone where it was dented by a fall. To get my phone in the picture I had to use my girlfriend's phone and send the picture so I apologise for the bad quality.

-
-
I can carry my 2 layer 111 picnicer for this challenge correct?
@hiraethus said:
. . .
A few basic rules:
[list type=decimal]- 1 or 2 layers only.
- 58-130mm, they're all good.
- Any handle material - cellidor, nylon, alox, stag, whatever.
- Both modified and stock knives are allowed.
- No other multis or knives allowed. Dedicated tools are OK if you need them for a particular job (pliers, saw, etc.)
- You don't have to stick with one knife for the month, as long as all the ones you do use are within the rules
. . .
It complies with #1 and #2
I'll be using a 130mm Hunter Pro at some time during the month, probably more than once.
John
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


