The Mega84
-
@50ft-trad said:
Ok, here goes..... four picturesSorry it took me so many days to reply :-[ That life thing gets in the way :ahhh
I don't have a real solution, just wondering if moving the openers layer next to the other knife blade could work.
Otherwise, I'd be tempted to just drop something like a mini-sewing kit under the bottle opener to make it stand a little higher, in case that improved nailnick accessibility. Lame, I know

-
No problem at all

The opener layer needs to be in that position. The backspring has the cut out for the standard awl which I've used to accommodate the extra thickness of the backspring Phillips.
Next time this knife comes apart, I will be looking at lowering the height of the knife in front, and I have had an idea for making the bottle opener sit slightly higher by reworking the tang slightly, but I haven't proven the concept yet.
I know what you mean about life getting in the way, that's why there's been no more changes to this yet :D
-
@50ft-trad said:
After a couple of days carry, there's a bit of side to side play in the main blades, and there's certainly more daylight between the springs. I think the pre peened heads done with the hammer drill, have "settled" in their respective bushings. I had a suspicion that might happen when I was peening it up.As regards the overall concept, version 1 has certainly proved itself though, and the knife was not meant to be considered finished at this stage anyway.
<snip>
The Mega84 has been taken out of service :-\
Yesterday I developed a bit of a creak which sounded like a liner moving on a pin, and at that point I decided to put it aside until I do V2 of this knife.
I had only ever intended this version to be proof of concept, which it has passed with flying colours. However, there's obviously been some movement of the pins, either due to incorrect peening, or the peened heads pulling into the bushings. The original plan for V2 was for brass liners and nylon scales again, but I'll probably end up moving straight to the final version with homemade scales I reckon.
Won't be anytime soon, as there's too much other stuff I have to do first. I'm quite happy that I managed to get some good use out of this before it started developing issues though :)
-

I read the whole thread but didn't see anything about where you got the serrated blade. (Maybe it's there but I didnt find it) I know a weekender has the serrated blade...that fits on 84mm? Or is there an 84mm model with serrated blade? Or did you just serrate your own? Looks like a factory serration.
I'm not doing as crazy of stuff with the back tools, just wanted to put serrated blade/nailfile on a backspring I have from a Lumberjack. (No back tools.)
I have all the other donor knives descaled, using Golfer, Sportsman and Lumberjack. Considering reshaping 91mm metal saw if I can get another 84mm WS backspring.
-
I'm not sure where Fiddy got his serrated blade, but there is/was a serrated Recruit: http://www.sakwiki.com/tiki-index.php?page=Recruit
-
@hiraethus said:
I'm not sure where Fiddy got his serrated blade, but there is/was a serrated Recruit: http://www.sakwiki.com/tiki-index.php?page=RecruitThanks..
Just did a quick ebay check... $75 USD! But I will keep looking now that I know they exist. Seems like in the pics the serrated blade is longer than the plain blade...I have a regular 91mm main blade here I can see how it fits and how much would need to be cut, maybe just get a weekender.I have done some serrations by hand but I'd really like a factory look, maybe I can build some kind of a jig for spacing....maybe do a run of serrated blades? I dream too big.
-
I'm not sure where Fiddy got his serrated blade, but there is/was a serrated Recruit: http://www.sakwiki.com/tiki-index.php?page=Recruit
Thanks..
Just did a quick ebay check... $75 USD! But I will keep looking now that I know they exist. Seems like in the pics the serrated blade is longer than the plain blade...I have a regular 91mm main blade here I can see how it fits and how much would need to be cut, maybe just get a weekender.I have done some serrations by hand but I'd really like a factory look, maybe I can build some kind of a jig for spacing....maybe do a run of serrated blades? I dream too big.
It might be an 85mm Wenger blade. Wenger has done a lot more serrated blades than Vic in the past.
-
@hiraethus said:
I'm not sure where Fiddy got his serrated blade, but there is/was a serrated Recruit: http://www.sakwiki.com/tiki-index.php?page=RecruitSorry, only just noticed this
the serrated blade did indeed come from a serrated recruit, which I got from the trade forums here ages ago -
I win again. :D -
@hiraethus said:
I win again. :D
The five donors were:
Serrated Recruit
Salesman
Sportsman
MFV+
Pioneer Rancher -
The Mega 84 is awesome. Great mix of tools. This would effectively replace the need for me to carry a 58mm for finger nail duty, and would cover food prep too. I want one. Too bad I don't have mad modfing skills and a bunch of parts.
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
Thanks Mizedog.
it took me a while to accumulate the right donors for it, but as for modding skills, it is one of only two knives that I have built from parts. I am still very much a newbie in that respect.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
BRILLIANT!!!!!!