Original Wavea anomaly
-
@duckman1975 said:
Welcome to the forum! could you post picture please.Thanks!
Yes, here are some pics, sorry for the bad quality. My camera has no macro mode.
As you can see, the handles are not straight. They seem to warp right in the middle.

-
@original man said:
Welcome to the forum! could you post picture please.
Thanks!
Yes, here are some pics, sorry for the bad quality. My camera has no macro mode.
As you can see, the handles are not straight. They seem to warp right in the middle.2 more pics.


-
Do you use the screwdriver with the handles in the 180 degree or "stretched" position? If you do that, you can twist the handles as they don't have the same amount of support as they do when closed. If that's the case, then I think it's virtually impossible to straighten them. If the tool still works though I'd just keep using it, and keep this problem in mind so you don't continue to do it and make it any worse.
Welcome to the forum!
Def
-
@Defender said:
Do you use the screwdriver with the handles in the 180 degree or "stretched" position? If you do that, you can twist the handles as they don't have the same amount of support as they do when closed. If that's the case, then I think it's virtually impossible to straighten them. If the tool still works though I'd just keep using it, and keep this problem in mind so you don't continue to do it and make it any worse.Welcome to the forum!
Def
Whoa, you know what? You could be right about the screwdriver thing. Kinda shocking that it bends so easily. I haven't used it for super tough stuff tho.
Guess I'll just keep the little sucker as a beater and the new wave in my bag just in case? -
@Defender said:
Do you use the screwdriver with the handles in the 180 degree or "stretched" position? If you do that, you can twist the handles as they don't have the same amount of support as they do when closed. If that's the case, then I think it's virtually impossible to straighten them. If the tool still works though I'd just keep using it, and keep this problem in mind so you don't continue to do it and make it any worse.Welcome to the forum!
Def
Oh yes and thanks for the welcome! :)
-
No problem... any time you need an excuse to buy a new multitool we are here to help! :D
In fact, we'll be there to help you get a new one even when you don't need an excuse!
I can't intelligently discuss the metallurgical reasons for it, but I think it's more of a consistent thing than a one time hard screw thing. The plier head inside the handle provides some rigidity against the twisting, but for obvious reasons doesn't help when it's stretched out. As such, if I remember my physics correctly, you are actually putting more pressure on the unsupported handle when it's stretched out, since the plier head is supporting the other one. When done repeatedly over time, the effects can be (as you've seen!) detrimental because they are cumulative. Bend it a fraction of a degree each time, and use it say twice a week for ten years and you could end up with something quite noticeable.
Def
-
If it's still useable, use it!
It is a pretty good excuse to get a new tool though

I thik of it this way...any lesser tool would have broke long abo. Leatherman tools can take a beating, or a bending.
-
If you used it to unscrew for the past 9 years may I suggest to start screwing them in now :P and 9 more years your handles will align.
-
@Defender said:
No problem... any time you need an excuse to buy a new multitool we are here to help! :DIn fact, we'll be there to help you get a new one even when you don't need an excuse!
I can't intelligently discuss the metallurgical reasons for it, but I think it's more of a consistent thing than a one time hard screw thing. The plier head inside the handle provides some rigidity against the twisting, but for obvious reasons doesn't help when it's stretched out. As such, if I remember my physics correctly, you are actually putting more pressure on the unsupported handle when it's stretched out, since the plier head is supporting the other one. When done repeatedly over time, the effects can be (as you've seen!) detrimental because they are cumulative. Bend it a fraction of a degree each time, and use it say twice a week for ten years and you could end up with something quite noticeable.
Def
Jep, I think that you are right about the consistency part. Gee I've been screwing around for 9 years... Gotta get me some real friends now huh?

-
@Corrugated said:
If it's still useable, use it!It is a pretty good excuse to get a new tool though

I thik of it this way...any lesser tool would have broke long abo. Leatherman tools can take a beating, or a bending.
True words my friend.

-
Those anomalies makes our multitool unique like the rattle on my Surge.
-
@duckman1975 said:
Those anomalies makes our multitool unique like the rattle on my Surge.Next level thinking I guess? But it still hurts when multi takes hits...
-
They aren't "anomalies,""warpage,""twists," or "dents." They are character marks, and like Corrugated says, only the best tools last long enough to develop character!
Don't believe me? How many scars have you got? How many stitches and band aids have you been through in your life? Is it time to toss you in the trash? Don't let the mother in law answer that for you! It's experience and character, two things engineers can't replicate any more than a wet behind the ears college kid (sorry Roadie and Spoony! :D) can!
No one can say you don't know what you are doing when your tools have logged that many miles! :D
Def
-
@original man said:
Those anomalies makes our multitool unique like the rattle on my Surge.
Next level thinking I guess? But it still hurts when multi takes hits...
I know it hurts but thats what they are here for they take the hits so you don't have to, hope I made sense :D
-
Welcome to the forum OM

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login