Lansky sharpening system users.......
-
@Marcellus said:
Aloha007Nice edges
Thanks I appreciate it
. Just wanted to even out the LM grinds and add a little pizzaz. -
I still free hand sharpen every so often to retain the skill ( so I stay sharp, if you excuse the pun)
Even with many years experience, I can't duplicate the Lansky edge as well -
[ALEPH78 USES THREAD NECRO] [IT'S SUPER EFFECTIVE!]
So, what would you guys recommend for a beginner? I've never been really good at sharpening so I'd require something easy.
I read about and saw some videos of the Lansky Sharpening system, and it looks promising and affordable. Or could I just
do with the Lansky Turn Box? I know I need a bench stone of some kind for my puukko, but for the SAKs and MTs?Some advice would be grreatly appreciated.

-
I find the Lansky system is good for initial sharpening where you want to control the grind angle or need to re-shape an dull edge, but I find it annoying on longer blades (e.g. kitchen knives) and fiddly on narrow ones (like a SAK pen blade). The rubber pads that clamp the blade don't work that well on a small blade. But it works, and does a good job. The turnbox is great for touch ups, once you've set the edge angle. So, in true MT.o fashion, get both.
:) -
@hiraethus said:
I find the Lansky system is good for initial sharpening where you want to control the grind angle or need to re-shape an dull edge, but I find it annoying on longer blades (e.g. kitchen knives) and fiddly on narrow ones (like a SAK pen blade). The rubber pads that clamp the blade don't work that well on a small blade. But it works, and does a good job. The turnbox is great for touch ups, once you've set the edge angle. So, in true MT.o fashion, get both.
:)Yeah, that's what I was afraid of :P
:D
-
OK, next question, what would be a good price for the Lansky system and the Turn Box? Don't like to be ripped off...
I think I saw the System going for 30 USD on the evilBay and Turn Box for 15 USD ???
-
@Aleph78 said:
OK, next question, what would be a good price for the Lansky system and the Turn Box? Don't like to be ripped off...I think I saw the System going for 30 USD on the evilBay and Turn Box for 15 USD ???
Sounds about right for the Lansky system
No idea about a price on the Turn Box though
Seems to be a good price but I don't have one nor ever looked at prices of them ;) -
Yep, sounds right. Check which Lansky system you go for - there are various ones with different combinations of stone. Mine is the 3-stone coarse/medium/fine - the 5-stone one might have been a better bet.
-
I think I should be fine with the 3 stone system for now, after all I can buy the additional stones later, right?
-
@Aleph78 said:
I think I should be fine with the 3 stone system for now, after all I can buy the additional stones later, right?Yes you will be fine with the 3 stone version and yes you can buy whatever additional stones you may require.
-
New page banana man dance

-
I added the fine sapphire after I got the standard 3 stone set and the sky is the limit on what all is available stone wise with Lansky

-
Finally ordered the 3 stone Lansky system today, will get some pics in as soon as it arrives

-
[quote author=Aleph78 link=topic=65186.msg1411939#msg1411939 date=1484404168]
Finally ordered the 3 stone Lansky system today, will get some pics in as soon as it arrives
[/quote
-
I have a Lansky system with 4 diamond hones, and it just sits on a shelf not being used. I do not regret buying it though.
These days, I prefer to sharpen freehand, but I found the Lansky system to be an excellent teaching aid before I moved to freehand. It was particularly useful when reprofiling, either to remove a chip or indent, or to correct a poor factory grind.
-
@50ft-trad said:
I have a Lansky system with 4 diamond hones, and it just sits on a shelf not being used. I do not regret buying it though.These days, I prefer to sharpen freehand, but I found the Lansky system to be an excellent teaching aid before I moved to freehand. It was particularly useful when reprofiling, either to remove a chip or indent, or to correct a poor factory grind.
It certainly is!

-
I love my Lansky. My carbon steel blades become razors using it.

-
I too have the Lansky 3 stone setup. After awhile I found a deal on the polish stone (sapphire one I think it was) so I picked it up just to have. I don't get into polished edges but if I decide to try something different I have that stone just waiting to be used! :)
The Lansky is only used for repairs or to reset a bevel etc. as mainly I just use the Sharpmaker or once in awhile the Lansky 4 rod setup to touch up the blades. The 4 rod turn box doesn't see much use though.
-
@sir_mike said:
I too have the Lansky 3 stone setup. After awhile I found a deal on the polish stone (sapphire one I think it was) so I picked it up just to have. I don't get into polished edges but if I decide to try something different I have that stone just waiting to be used! :)The Lansky is only used for repairs or to reset a bevel etc. as mainly I just use the Sharpmaker or once in awhile the Lansky 4 rod setup to touch up the blades. The 4 rod turn box doesn't see much use though.
I also have the 3 stone and sapphire polish stone setup
It doesn't get used much as I favor freehand sharpening as well but it does help repair edges very well 
-
@Aleph78 said:
Finally ordered the 3 stone Lansky system today, will get some pics in as soon as it arrives
Can't wait to see the pics buddy
Also to hear your thoughts on it after a bit of use 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login