October 30 day minimalist SAK challenge
-
Day 15, Danish Cadet:

-
Day 15
We're at the halfway point! This is turning out to be easier than I thought it was going to be. Using the Tinker I took a cutting from my orchids for a friend, but now there is a bare spot on the tree that looks wrong to my eyes. At least I got a nice box in the mail to console me. The package included an alox SD which I will be carrying tomorrow.
-
@glenfiddich1983 said:
Today still the soldier.
Is that a Wenger with Laser pointer? I have one but can't get it to work, don't know what's wrong with it.
-
@Ronald Schröder said:
Today still the soldier.

Is that a Wenger with Laser pointer? I have one but can't get it to work, don't know what's wrong with it.
It is a Wenger Laser, but like yours it's not working (bought it knowing the Laser pointer may be broken). Trying to find out if it can be repaired, and else it's a nice display piece together with the Wenger Director (with old fasioned retractable pointer).
-
DAY 15
I've been inspired to try some hook usage. I used the hook to dislodge a stuck handle on a sliding door.


-
@shamus said:
DAY 14
I thought I’d try another attempt with the combo tool. If I go slow and easy, I can keep the tool from punching through the cap.
Cool, or you could just twist that cap off... ::)
Aww, that's not fun! :D
-
Day 15 Autumn has arrived!
WP_20161015_002 by magpie2112, on Flickr -
15/30 powers gonna be shaking today with typhoons on the coast of Oregon :o little pocket flashlight rolling with me to be able to get me to the big lights and candles if need be. Already used them both!
-
@kaput said:
15/30 powers gonna be shaking today with typhoons on the coast of Oregon :o little pocket flashlight rolling with me to be able to get me to the big lights and candles if need be. Already used them both!Hope you manage to ride out those storms okay! Love that electrician's sheepsfoot blade , going to have to get me a SAK with one at some point, pity Victorinox don't do an Electrician X yet, though (if they do, hope they continue to leave the keyring off. Never liked them on the Alox knives)
Nice slip BTW, do you find it stops the knife going horizontal in the bottom of your pocket? Where do you get it from?
-
@Oxford_Guy said:
hope they continue to leave the keyring off. Never liked them on the Alox knives)Better having one that you can rip off, than none that you can't add >:D
-
@glenfiddich1983 said:
Today still the soldier.
This is my day 15 entry by the way, just to make sure I keep count ;)
-
@Oxford_Guy said:
hope they continue to leave the keyring off. Never liked them on the Alox knives)Better having one that you can rip off, than none that you can't add >:D
On the Alox knives I'd rather have a bail like on the Wenger Standard Issue. I don't have any issue with the key ring on the 91mm models, though
-
@Oxford_Guy said:
hope they continue to leave the keyring off. Never liked them on the Alox knives)Better having one that you can rip off, than none that you can't add >:D
On the Alox knives I'd rather have a bail like on the Wenger Standard Issue. I don't have any issue with the key ring on the 91mm models, though
+1 Ox-Guzzle. I modded an SI to a Farmer with a Bail and it kicks butt.
WP_20160831_003 by magpie2112, on Flickr -
(;,;)(;,;)(;,;)Lest we forget to celebrate the new page!
-
Day 15
Carried the Soldier again today. Could anyone explain how the cab opener is supposed to work? I can't seem to get it.

-
15/30 powers gonna be shaking today with typhoons on the coast of Oregon :o little pocket flashlight rolling with me to be able to get me to the big lights and candles if need be. Already used them both!
Hope you manage to ride out those storms okay! Love that electrician's sheepsfoot blade , going to have to get me a SAK with one at some point, pity Victorinox don't do an Electrician X yet, though (if they do, hope they continue to leave the keyring off. Never liked them on the Alox knives)
Nice slip BTW, do you find it stops the knife going horizontal in the bottom of your pocket? Where do you get it from?
Storm should be fine. I'm about an hour and a half from the coast which is getting the worst of it. Powers clicked on and off a few times, no big.
The electricians great, for me. I would never really use a can opener, and if I did I have a couple hand crank kitchen utensils that do it in 2 seconds. So for me an extra blade is much more utilitarian. Especially the shorter sheepsfoot, with wire stripper. It's great for precision work or just needing a blade to be half the length of the main blade. And yes an electrician x would be amazing!! I would definitely be owning one!
And the slip is a northwoods/ksf leather slip for my Northwoods Michigan Jack, but I haven't carried it because of this challenge so I've been using the slip for the 2 layer. It works good, and really it depends on the pants I'm wearing whether it rides horizontal or vertical. If I have slim fitting jeans it rides vertical no problem, but if they are looser pants with bigger pockets it can still fall horizontal. I also wear some chino style pants and the slip helps the knife from not slipping out of my pocket unexpectedly.
-
Day 14: (yesterday)
Needed to trim some stray stems on the front bushes. Works... But not the ideal blade for this.


-
Day 15: (today)
Transplanting some pet grass into a real plant pot. Definitely going to have to clean and sharpen the blade after this... Running it through roots and dirt is rough.

-
Day 15...
If I'm not disqualified from touching a spyderco


-
Carried the Soldier again today. Could anyone explain how the cab opener is supposed to work? I can't seem to get it.
It works very much like the Wenger "eagle beak" opener. You hook the small tab on the lower portion under the rim on the outside of the can, and then punch the lid with the hook portion. With an "eagle beak" opener, you work the opener counter-clockwise moving the knife backward toward yourself, keeping the hooked part in the cut you've already made and simply slicing more of the can lid. Helps if you keep the hook as close to the rim as possible. Watch how he uses the Wenger eagle beak opener in this video that compares the Wenger to the Victorinox. He uses the Wenger first. Don't make the mistake he did when he started by pushing it in too far. Lots of smaller cuts work very quickly compared to trying to make big cuts in the can lid.
Hope this helps! There is a learning curve to using these openers (Vic and Wenger). I've opened hundreds of C-ration cans with a P-38, Vic and Wenger openers. Once you've used one a few times it gets much easier and you can open one almost as fast as with a typical kitchen crank and cutting wheel opener.
John
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login