October 30 day minimalist SAK challenge
-
Day 18

-
Day 19
Soldier on duty today:

-
Day 19. Two Soldiers on duty here: One SI and the other Medical Bill, U Boat health and safety warden;
WP_20161019_001 by magpie2112, on Flickr -
<u>Day 15</u>:
(Attempting it ALL single layer!)Another shot at using the Wenger combo opener to open a can, this time with the EvoGrip 64, in a comparison with yesterday's Victorinox Waiter.

Getting started puncturing the can is more difficult. As before, getting it to hook under the rim isn't as easy with the Victorinox, and I believe it has to do with the pointed shape combined with the Evolution scales, which are a little wider than the standard Wenger scales were when the tool was first designed. Once it has punctured the can, working it around the edge in many tiny steps works fine.

As it proceeds around the can, it is leaving what seems to be more gap between the lid and the can rim as it bends the edge the lid downward. It also wants to wander a millimeter or two from the rim, although it's not leaving a ragged cut on the can.

Getting around to the final part, it's not possible to cut through to where I started, but must fatigue and break the last couple millimeters by flopping the lid up an down. Like the Victorinox, the lid edge is not a work of art, but it's only going to get pitched into the recycle bin and the metal recycler doesn't care what it looks like.

The edge left inside the can isn't completely up against the rim, but it's a surprisingly very smooth cut pushed down almost against the can wall. Doesn't interfere with getting the food content out, but running a finger along it to see if it's sharp is discouraged (Medical Bill would pitch a fit). This shows where I fatigued the last bit of metal holding the can lid onto the can.

As before, it opens the can, and while the can lid isn't a nice clean circle of soft tin coated steel, the can itself is left with an OK edge. There is more learning curve for me in using the Wenger combo opener. I will give it another shot some time to experiment with tilting it very slightly inward or outward while working the cut around the can rim. I keep reminding myself the goal is getting to the can's contents efficiently without making a mess of the counter, not how beautiful the led and can rim are afterward.

As with the Victorinox Waiter, one won't starve during the Zombie Apocalypse with the Wenger EvoGrip 64.
John
-
Another excellent post jalind! I look forward to these.

Medical Bill read what you said and went :ahhh
-
Day 19, wenger commander

-
Day 19
Red Classic with black fob.
-
DAY 19
I cut a band-aid into two finger-sized ones. I find it works better to buy just the regular size of band-aid. I can trim them down to make smaller ones, or double them up to make a larger one. One size can just about do it all if you get creative. I keep two in my wallet and it gives me all sorts of options.

-
-
Nice!
Sent from my Nexus 6 using Tapatalk
-
@hiraethus said:
19/30 Back to my old favourite Tinker

I think your boss is mean to give you your plans in Chinese H. And what is a unit of Z?
-
@shamus said:
DAY 19I cut a band-aid into two finger-sized ones. I find it works better to buy just the regular size of band-aid. I can trim them down to make smaller ones, or double them up to make a larger one. One size can just about do it all if you get creative. I keep two in my wallet and it gives me all sorts of options.

I need to remember this one! I've never completely cut one in two, but have split the two adhesive ends down to the compress to improvise a knuckle bandage. I expect Medical Bill will have to weigh in on it (unless, of course, you paid him off beforehand).
-
@shamus said:
DAY 19
I cut a band-aid into two finger-sized ones. I find it works better to buy just the regular size of band-aid. I can trim them down to make smaller ones, or double them up to make a larger one. One size can just about do it all if you get creative. I keep two in my wallet and it gives me all sorts of options.

I need to remember this one! I've never completely cut one in two, but have split the two adhesive ends down to the compress to improvise a knuckle bandage. I expect Medical Bill will have to weigh in on it (unless, of course, you paid him off beforehand).
Medical Bill says' Sometimes you find yourself in a situation where you don't have the luxury of using a whole plaster. Maybe 2 or 3 of your buddies have sliced a finger opening a takeaway coffee, or by playing 'Catch the SAK' in the field. If you only have a couple of plasters then A. stop 'Catch the SAK' NOW, otherwise, you're gonna have to improvise. Assess the wounds first. Assess your supplies and the amount of time left before you can resupply and take it from there. Remember, if you have run out of plasters and have to resort to tearing up clothes, the rule is, whoever loses at 'Catch the SAK' has to give up their trews first. It's the Rules.
Hope this helps. Stay Safe Kids.
WP_20161017_008 by magpie2112, on Flickr -
I think your boss is mean to give you your plans in Chinese H. And what is a unit of Z?
Ooo, Urban Camouflage...[emoji41]
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
Day 17
So I took some pictures yesterday of me using the Soldier to remove the old handlebar tape from my new (old) bike. They turned out to be impossible to publish, they were just so out of focus. And my burger and a beer for dinner turned into quite a few beers and no time to take any new pictures. So with this second miss I'll opt out of the drawing but I'll still post pictures. Here's the result of using the Soldier to open a can and a picture of my bike.


-
Day 18
And next up is today's picture together with my latest addition to my EDC, a Thrunite T10t. I considered the Nitecore MT1a, a light with superior functionality but the T10t is more my style and it turned out to be on sale so I got it.

-
I think your boss is mean to give you your plans in Chinese H. And what is a unit of Z?
Looks to me like Japanese more than Chinese (mostly because of the hiragana の we can spot in the text)
-
I think your boss is mean to give you your plans in Chinese H. And what is a unit of Z?
Looks to me like Japanese more than Chinese (mostly because of the hiragana の we can spot in the text)
Well, it's all Greek to me... ba dum dum tish
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login