October 30 day minimalist SAK challenge
-
Once again the watch opener gets to perform scales removal. Some 91mm copper plus scales arrived yesterday. Early this AM I installed them on one of the excess Tinker left over and untouched during the fabrication of four Apprentice. A number of the Tinker I acquired were in such excellent condition I didn't have the heart to gut them for the all-important Phillips. They have been mothballed since early this year. Noted recently that while I had an Apprentice, Small Tinker, Super Tinker and Deluxe Tinker in the EDC rotation drawer there was no Tinker. The mothballed Tinker selected for this was in the best condition, near mint, with economy nylon scales. I had been tempted to put some black scales on it but thought the copper ones would be just right for it.
Everything assembled for the project to begin, including the new copper scales . . .

Front side is already off, and starting on the back side with the watch opener blade. For me it's become the ideal tool for this.

Both sides off now, and we get a view of the Tinker's liners. It's exceptionally clean. No need to wash and scrub this one!

The new scales fit very well and just snapped on, in spite of being metal. Used the vise for one end of one side. Had I kept up with using my weight pressing on it, that end would have snapped down. Checked for fit of the tweezers, toothpick and pen, discovering the toothpick slot needed a little tweaking. These aren't like Cellidor or Nylon. Although Copper is considered soft, ductile and malleable, at the forces I'm exerting on them, they're hard, unyielding metal with no give or compliance. A handful of passes in the toothpick slot with a square jeweler's file opens it up just enough for the toothpick to fit properly. Anyone contemplating aftermarket scales like these, especially metal ones, should anticipate they might need a tweak or two as there is manufacturing variation among the enormous population of 91mm Victorinox knives in use globally.
A picture of the front side with the Swiss Cross and the tweezers installed . . .

A look at the backside with the toothpick, pen, keyring and fob installed . . .

Closed up and almost ready for EDC. I'm still working on doing October's challenge single layer, and after removing the back scale a couple times to tweak the toothpick fit, it doesn't quite snap on as tightly as it first did. I need to use a touch of adhesive on the three rivets the scales snap onto. Won't take much to hold them on securely, and the scales should still break loose with sufficient leverage. Folded up now and will be stored until I can do the adhesive later today. With all that Copper, it's definitely much heavier than it was! Has quite a bit of heft now.

Not Cellidor and not Alox either. I dub thee the Cuprox Tinker Plus! The Copper is bright and shiny now, but like the U.S. penny it should develop a patina with handling and time. The watch opener once again gets the job done.
John
-
DAY 20
I tightened a loose screw on my watchband with the eyeglass screwdriver. Now I have to let it sit for 8-12 hours for the threadlocker to cure.

-
Day 20, bugnard pruner

-
-
Day 20 - the home straight!
While I am still carrying the Noble SI, Medical Bill, who arrived too late to take part in the challenge, is rubbing my nose in it by carrying his Modded Woodsman.
WP_20161020_003 by magpie2112, on Flickr -
T14, day 20:
Compact helped me send a care package to the UK today

-
Day 20
Removing the freshness seal from a jar of peanut butter. (Skippy Super Chunk)
-
Day 20/30
My other 74mm, that has been in storage for probably 15 years (lacks toothpick and tweezers). I only carried it a few days after buying it, then moth-balled it. Just shaking things up a bit.

Sent from my SAMSUNG-SM-N900A using Tapatalk
-
Gorgeous money clip Kurt

-Tom -
@magentus said:
Day 20 - the home straight!While I am still carrying the Noble SI, Medical Bill, who arrived too late to take part in the challenge, is rubbing my nose in it by carrying his Modded Woodsman.
WP_20161020_003 by magpie2112, on Flickr
-
Day 20 - the home straight!
While I am still carrying the Noble SI, Medical Bill, who arrived too late to take part in the challenge, is rubbing my nose in it by carrying his Modded Woodsman.
WP_20161020_003 by magpie2112, on Flickr
Me too. Very nice.
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
Day 20 - the home straight!
While I am still carrying the Noble SI, Medical Bill, who arrived too late to take part in the challenge, is rubbing my nose in it by carrying his Modded Woodsman.
WP_20161020_003 by magpie2112, on Flickr
Me too. Very nice.
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
Day 20...
Used my Tinker to open a package from Foos...
A Compact and an Ambassador!



Sent from my Nexus 7 using Tapatalk
-
@Kurt Misner said:
Day 20 - the home straight!
While I am still carrying the Noble SI, Medical Bill, who arrived too late to take part in the challenge, is rubbing my nose in it by carrying his Modded Woodsman.
WP_20161020_003 by magpie2112, on Flickr
Me too. Very nice.
Sent from my SAMSUNG-SM-N900A using Tapatalk
i really like this little guy making appearances and taking the ride too! He looks to be taking the challenge very seriously.

-
20/30! Walking out of my place today stopped for this quick photo op.

-
Day 20
The Soldier helped me get to my beer for today's dinner. For not being a cap lifter it does a remarkably good job at it and it's quite possibly better at lifting caps than opening cans (see my earlier picture of the result).

-
The Soldier helped me get to my beer for today's dinner. For not being a cap lifter it does a remarkably good job at it and it's quite possibly better at lifting caps than opening cans (see my earlier picture of the result).
Good looking streak tartare! One of my favourite things to order when I'm in Paris (I visit quite often as my wife's family live there)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
