October 30 day minimalist SAK challenge
-
DAY 21
Friday at last! Time to crack open the bourbon. The wax on the bottle was parculary tough. Compact blade to the rescue!

-
Day 21
Everyone seems to have been sharpening their knives recently (is 20 days some sort of standard length a Victorinox can go before needing sharpening?
). I didn't want to be left out although it's a bit of a waste since I haven't really taken the time to fix some sort of shim to keep the blade from closing down on the frame, ouch!Oh, and the blade looks horrible after some previous owner took something easy to course to it.

-
Another attempt at making a lanyard. Couldn't cut as much tail as I wanted without taking the lanyard off.
Snow already? I'm in Colorado at 7,000 feet and it will be 83 degrees tomorrow. [emoji53]
Everyone seems to have been sharpening their knives recently (is 20 days some sort of standard length a Victorinox can go before needing sharpening?
). I didn't want to be left out although it's a bit of a waste since I haven't really taken the time to fix some sort of shim to keep the blade from closing down on the frame, ouch!Oh, and the blade looks horrible after some previous owner took something easy to course to it.
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
Day 21:
I was going to post a picture of the knife "awl" by itself... But then Duplo bear showed up and offered to help pose the knife...

-
@Kurt Misner said:
Day 21
Another attempt at making a lanyard. Couldn't cut as much tail as I wanted without taking the lanyard off.
Snow already? I'm in Colorado at 7,000 feet and it will be 83 degrees tomorrow. [emoji53]
Everyone seems to have been sharpening their knives recently (is 20 days some sort of standard length a Victorinox can go before needing sharpening?
). I didn't want to be left out although it's a bit of a waste since I haven't really taken the time to fix some sort of shim to keep the blade from closing down on the frame, ouch!Oh, and the blade looks horrible after some previous owner took something easy to course to it.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Yes... first day here in igloo land
-
Yesterday's (21/30) Tinker

Don't know what to carry today yet... -
Day 22:
The novelty of the bail hasn't worn off yet, Wenger Standard Issue again today:

-
And it never will my friend, it never will. SI for me too today
WP_20161019_013 by magpie2112, on Flickr -
Decided to go with my Black Pioneer

-
Day 22: Soldier Saturday; I hope I can take an outside picture during the day, but for now

-
- Good carries all!
'71 Elsie for me again. :)
- Good carries all!
-
@hiraethus said:
Yesterday's (21/30) Tinker

Don't know what to carry today yet...Go with it. You can never lose with a Tinker!
-
Day 22, cadet

-
<u>Day 18</u>:
(Attempting it ALL single layer!)Today will be the adventures of the SwissCard Classic!

With the Victorinox SwissCard Classic you get all the implements of a Classic SD and then some, all in a single thin layer . . .
What's in your wallet? 
John
-
DAY 22
The towel rack was loose and needed fixing. So I broke out the serous tools: The Classic SD!
Step 1: I used the SD to remove the outer plate:

Step 2: Remove plate and unscrew the wall screws.

Step 3: New toggle bolts. Since the holes were already in the wall, a drill wasn't needed. Just push them in, and screw them tight with the SD.

Step 4: Reinstall the outer plate, tighten everything up, voila!

-
Day 22
Got a package yesterday after I'd already posted yesterday's picture so here it is for today. Used the Tinker to open what turned out to be my new (to me) 111mm Outrider for next month's challenge.
-
@shamus said:
DAY 22The towel rack was loose and needed fixing. So I broke out the serous tools: The Classic SD!
Step 1: I used the SD to remove the outer plate:

Step 2: Remove plate and unscrew the wall screws.

Step 3: New toggle bolts. Since the holes were already in the wall, a drill wasn't needed. Just push them in, and screw them tight with the SD.

Step 4: Reinstall the outer plate, tighten everything up, voila!


John
-
Tonight, my band is performing at a new location which requires us to bring a p a. Sound system. I think I'll need more than the Classic, but really don't have a large, 91mm option with separate screw drivers. I will probably go with a Vic Waiter, a Wenger Classic 62, or the Executive. The thing is, with music gear, there can be tiny screws, large screws, or a need for pliers. Might be interesting...
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
You do know that for the challenge you are allowed to use proper tools when called for, don't you? Pliers, screw drivers, saws, or what ever you need, as long as they are dedicated tools and not part of another multitool. We can't be expected to do everything with a SAK, especially a minimalist model.

-
T14 day 22:
Popular espresso


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login