SAK's - Corkscrew or Phillips?
-
Both - carry a Yeoman or Explorer

-
Since the entire world is held together with phillips screws and not wine corks, I think the answer to this one is obvious. If I were SAK Dictator, I would banish all corkscrews and cast them onto the dungheap of history to find their final resting place.
-
@Pablo O'Brien said:
Philips in general, for edc carry, doesn't work very well here for the same reason that the philips is of limited use to Canadians-Different screws!
We seem to use mostly Pozidrive screws! Hey Vic, can you make a backside pozidrive please? :oIn any case, I vote corkscrew!
The Vic back-side Phillips seems to work pretty well on pozi screws. The inline one, even more so. Whereas trying to use a pozi driver on Phillips screws is usually a disaster. So if you're going to have one cross-head driver, a Phillips is the one to have I think.
Here if you buy a pack of screws they'll usually be pozi, but manufactured products tend to be put together with Phillips screws.
-
Thanks for the alternative viewpoint on them screws.

Btw, not right place to ask, but speaking of philips, whats the size of the philips on the 58mm rally/manager/etc?
-
After buying this today in the large grocery section of a local department store (similar to a Target), my ambivalence is gone. Must have a Phillips and it needs to be the vintage Can Key type with the veritcal slot to open the Can Key cans that are still being made.

John
-
@jalind said:
After buying this today in the large grocery section of a local department store (similar to a Target), my ambivalence is gone.** Must have a Phillips and it needs to be the vintage Can Key type** with the veritcal slot to open the Can Key cans that are still being made.
John
I bet SAK pliers or a pair of needawlnose ones will work well on those cans ;)
-
After buying this today in the large grocery section of a local department store (similar to a Target), my ambivalence is gone.** Must have a Phillips and it needs to be the vintage Can Key type** with the veritcal slot to open the Can Key cans that are still being made.

John
I bet SAK pliers or a pair of needawlnose ones will work well on those cans ;)
Or just use the included can key?

-
After buying this today in the large grocery section of a local department store (similar to a Target), my ambivalence is gone.** Must have a Phillips and it needs to be the vintage Can Key type** with the veritcal slot to open the Can Key cans that are still being made.

John
I bet SAK pliers or a pair of needawlnose ones will work well on those cans ;)
Or just use the included can key?

Booooooooooo
Go back to the Can Key forum if you love them so much. Boooooooooooo - I brush my teeth with a multitool - it really hurts and my teeth are terrible but if you can't do it with a multitool it's not worth doing. -
After buying this today in the large grocery section of a local department store (similar to a Target), my ambivalence is gone.** Must have a Phillips and it needs to be the vintage Can Key type** with the veritcal slot to open the Can Key cans that are still being made.

John
I bet SAK pliers or a pair of needawlnose ones will work well on those cans ;)
Or just use the included can key?

Booooooooooo
Go back to the Can Key forum if you love them so much. Boooooooooooo - I brush my teeth with a multitool - it really hurts and my teeth are terrible but if you can't do it with a multitool it's not worth doing.
-
Victorinox MT oil works as a toothpaste sure.

-
... for that fresh aniseed breath! :D
And good luck pushing down the cork on a bottle of lambic. It will already be under pressure, and the cork will be long. The end result will in the best case be a mess and cork in the beer.
(It seems we to some degree follow the cliche of the Europeans wanting the corkscrew and the Americans wanting the Philips here. :D )
-
After buying this today in the large grocery section of a local department store (similar to a Target), my ambivalence is gone.** Must have a Phillips and it needs to be the vintage Can Key type** with the veritcal slot to open the Can Key cans that are still being made.

John
I bet SAK pliers or a pair of needawlnose ones will work well on those cans ;)
Or just use the included can key?

Booooooooooo
Go back to the Can Key forum if you love them so much. Boooooooooooo - I brush my teeth with a multitool - it really hurts and my teeth are terrible but if you can't do it with a multitool it's not worth doing.(
v
)Fortunately, as I have some vintage SAKs, the tools are already on hand! This is the Super Tinker. Also have a Deluxe Tinker and Small Tinker with Can Key Phillips . . .

I can only hope Victorinox will bring back the Can Key for those less fortunate who haven't been able to get one of these vintage. It would be a shame for them to starve without one during the Zombie Apocalypse.
John
-
[quote author=jalind link=topic=11976.msg1366611#msg1366611 date=1477265426]
After buying this today in the large grocery section of a local department store (similar to a Target), my ambivalence is gone.** Must have a Phillips and it needs to be the vintage Can Key type** with the veritcal slot to open the Can Key cans that are still being made.
John
I bet SAK pliers or a pair of needawlnose ones will work well on those cans ;)
Or just use the included can key?

Booooooooooo
Go back to the Can Key forum if you love them so much. Boooooooooooo - I brush my teeth with a multitool - it really hurts and my teeth are terrible but if you can't do it with a multitool it's not worth doing.(
v
)Fortunately, as I have some vintage SAKs, the tools are already on hand! This is the Super Tinker. Also have a Deluxe Tinker and Small Tinker with Can Key Phillips . . .

I can only hope Victorinox will bring back the Can Key for those less fortunate who haven't been able to get one of these vintage. It would be a shame for them to starve without one during the Zombie Apocalypse.
John
[/quote]Bring on the zombies!


-
Question - Do Zombies leave vegetarians alone?
-
@Steinar said:
... for that fresh aniseed breath! :DAnd good luck pushing down the cork on a bottle of lambic. It will already be under pressure, and the cork will be long. The end result will in the best case be a mess and cork in the beer.
(It seems we to some degree follow the cliche of the Europeans wanting the corkscrew and the Americans wanting the Philips here. :D )
In that situation I would use one of these . . .

U.S. Army M1902 Light Cavalry Saber
A Medcial Bill will attest, attempting to open a bottle of champagne or lambic using a saber without first studying and thoroughly knowing the sabrage technique, and rehearsing it, is strongly discouraged, as is performing the technique indoors.
John
(who has two of these; one ceremonial and this one, which is very real)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
