ADD Package Opener
-
@Aberdrew13 said:
You can check with Loki-mobile in the trade forums about parts. He's had most of what I've been after before.I can check tonight about the pivot sizes of a Wingman vs. a Rebar, but at the very least, you would need to add a locking notch to the package opener to have it lock open in the Rebar.
ETA: Here's the link for Loki's thread.... /topic/64314

The pivot size is the same on the Rebar and the Wingman.
-
You can check with Loki-mobile in the trade forums about parts. He's had most of what I've been after before.
I can check tonight about the pivot sizes of a Wingman vs. a Rebar, but at the very least, you would need to add a locking notch to the package opener to have it lock open in the Rebar.
ETA: Here's the link for Loki's thread.... /topic/64314

The pivot size is the same on the Rebar and the Wingman.
Thought so, but I wanted to be sure.

-
@SteveC said:
It's really easy to sharpen the tip of the can opener and turn it into a effective package opener. I did this on my Rebar.

</post/1041511>
I followed with Steves example and just sharpened the can opener
You not only get to keep the can opener but if sharpened at the right angle is a very effective package opener :o 
-
If you do decide to just swap in a package opener then I also recommend loki-mobile for parts

-
Package openers are so useful. I
them -
I sharpen the can opener to use as package opener with great success.
-
Fair enough. Sounds like the overwhelming majority says to sharpen the can opener (which I assume still offers the original ability). What's the preferred method? I'm thinking a dremel with a grinding wheel attachment? Sand paper finish?
-
I used a small metal file and diamond file
-
Yeah I just used a medium grit diamond sharpener and then fine and was good to go

-
Try that small serrated blade inside Sidekick on that Rebar, I think its not too long for Rebar? :)
-
@Vinjints said:
Fair enough. Sounds like the overwhelming majority says to sharpen the can opener (which I assume still offers the original ability). What's the preferred method? I'm thinking a dremel with a grinding wheel attachment? Sand paper finish?Just a hand file, then diamond stone. It won't take more than 30 mins.
-
Mini-Surge's opener.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login