October 30 day minimalist SAK challenge
-
Day 29.
Small herf today, so i'm carrying my Cigar knife!

Victorinox Cigar 36
-
I have been far to lax in commenting on all the wonderful pictures of this common journey of ours. It is an honour to be allowed sneak peeks of your lives. I am most grateful.

T14 day 29: Cellidor bantam on a pocket watch chain.

-
@T14 said:
I have been far to lax in commenting on all the wonderful pictures of this common journey of ours. It is an honour to be allowed sneak peeks of your lives. I am most grateful.
T14 day 29: Cellidor bantam on a pocket watch chain.

Bantam is a very nice small and slim packing in a lot in just one layer.I also enjoy seeing how some are used, and the composition of the still life and environmental photographs. There is some skill here with composition, lighting control and depth of field use.
John
-
- Standard Saturday
-
Day 29, todays Vic Cigar in action


-
Day 28
Super late entry, it's hard finding good photo opportunities (and remembering to upload them). You guys are doing great.
I carried the Executive to have the scissors mostly, after this challenge I should really return the SwissCard to my wallet.

-
DAY 29


-
Day 29:
WP_20161029_006 by magpie2112, on Flickr -
Day 29
My trusty Alox Rambler today:

-
@Oxford_Guy said:
Day 29My trusty Alox Rambler today:

NEED lanyards like that!
-
Day 29/30
Say hello to my little red letter opener...

Sent from my SAMSUNG-SM-N900A using Tapatalk
-
@Kurt Misner said:
Day 29/30
Say hello to my little red letter opener...

Sent from my SAMSUNG-SM-N900A using Tapatalk
What happened to that corkscrew??
I wished I had my tourist/sportsman/soldier/compact/ with me today, the corkscrew of my Gourmet wasn't as handy as a can opener/combo-tool to remove a staple


-
@Kurt Misner said:
Day 29/30
Say hello to my little red letter opener...

Sent from my SAMSUNG-SM-N900A using Tapatalk
What happened to that corkscrew??
I wished I had my tourist/sportsman/soldier/compact/ with me today, the corkscrew of my Gourmet wasn't as handy as a can opener/combo-tool to remove a staple

Something is wrong. I bought this knife on ebay for about $3. The blade is fine, the combo tool doesn't have the sharp point I see on other knives, and cork screw doesn't retract. It might be the spring, it might be a worn corner on the cork screw. It's not great for pocket carry since it sticks out and pokes me.

Sent from my SAMSUNG-SM-N900A using Tapatalk
-
<u>Day 25</u>:
(Attempting it ALL single layer!)The Stainless Steel Prince has drawn today's DSoD (Duty SAK of the Day) . . .

Since I'm overlapping my last week of the Minimalist with the first week of the Discontinued challenges, I've posted the complete story about today's Prince adventures in that thread. The entire tale can be read there:
</post/1369640>
John
-
Day 29
My trusty Alox Rambler today:

NEED lanyards like that!
It's just a standard Victorinox lanyard, they're quite commonly available in black, orange or red.
-
@jalind said:
<u>Day 24</u>:
(Attempting it ALL single layer!)A day in the life of Apprentice #2 . . .
I've still got two of the four I made. Time for #2 to go for its maiden voyage. First step is putting a basic edge onto its blade:
First a formed edge with moderate sharpness using the Victorinox sharpening pen

Then the smooth portion of a ceramic coffee mug bottom

Ready to go! This afternoon I'm making beer bread, a type of quick bread using beer instead of water. Can't just use it out of the box though, it needs to be customized. This one will be a "pizza" beer bread with shredded mozzarella cheese, pepperoni slices, diced jalapeños and mushroom pieces

Aside from the bread mix, I also need 3 tablespoons of butter melted to drizzle over the top just before putting it into the oven. The bread pan is stoneware. With a very light coating of oil on the inside it releases the baked bread loaf without any sticking whatsoever. Not enough left of the 1/4 pound stick in the refrigerator, so I need to cut a piece off of a new stick from the freezer. I use unsalted butter for baking and salted butter for the dining table. The Apprentice is perfect for slicing through the frozen butter. It goes into the microwave to be slowly melted

This isn't the first time I've made beer bread with these kinds of additives. It's much easier to mix if the extra ingredients are laid out in small bowls beforehand already measured. From everything that was pictured I'm going to use half of each which means I can make another loaf of this bread within the next month or so. Need to open these cans of jalapeños and mushroom pieces and drain the water and juice off of them to minimize the moisture being added to the bread mix.

The jalapenos will have to be strained (been there, done that) but the juice in the mushroom pieces is thin enough it can be drained while still in the can. The Apprentice's combo opener is used to start opening the can, but after a half inch or so I go around 180 degrees and punch a hole. This provides an air hole that allows the can to be drained over the sink.

The Apprentice's spear point blade makes quick work of the bread mix pouch!

Now for the beer! What better to use in October than an Oktoberfest beer?

As with opening the cans, the combo opener makes quick work of the bottle cap and the beer is added to the bread mix.

The jalapenos have already been added to the dough, and the rest of the ingredients are staged to be put in one at a time.

Each one is mixed in and the dough folded to disperse it before adding the next one

All the ingredients have been added and a final, brief mixing is done to ensure they're dispersed throughout the dough. I use a 2-quart Pyrex measuring bowl with spout as it's easier to scoop out into the bread pan compared to a stainless steel or polyvinyl mixing bowl (e.g. Tupperware).

I keep a small part of the grated cheese out to sprinkle over the top, and then add the melted butter, which helps to create a nice crust.

Into the pre-heated oven it goes for an hour, and the Apprentice is used with the combo at 90 degrees to pull the hot rack out so the bread pan can be placed on it. It's used again fully open to push the rack back in.

While it's baking, the mailman arrives with two packages. The just sharpened Apprentice slices through the bubble pack like a hot knife in butter!

Likewise, it makes quick work of this thick envelope . . .


Inside are a set of 91mm "Plus" custom Titanium scales for my newly acquired Explorer Plus, and a nice Victorinox leather card case. I've needed a new card case for some time now.
The bread is out of the oven and it needs to cool for at least an hour before taking it out of the bread pan. The shredded cheese that was sprinkled across the top has browned perfectly.

While pulling it out of the oven, one of the door screws looked like it might be loose, so the Apprentice's Phillips tightens it up a tad.

After about two hours, the bread is pulled out of the pan and I start slicing it using a wood bread board with spacers to guide the bread knife for uniform slices. This is what the middle looks like. The pepperoni and jalapeños are readily visible.

Been a busy day for the single layer Apprentice which had a thorough workout. Passes its maiden voyage with ease. Time to kick back for a while and enjoy a slice of beer bread!

John
Good work, sir! -
@jalind said:
<u>Day 25</u>:
(Attempting it ALL single layer!)The Stainless Steel Prince has drawn today's DSoD (Duty SAK of the Day) . . .

Since I'm overlapping my last week of the Minimalist with the first week of the Discontinued challenges, I've posted the complete story about today's Prince adventures in that thread. The entire tale can be read there:
</post/1369640>
John
I love this pattern :D
@Kurt Misner said:
@Kurt Misner said:
Day 29/30
Say hello to my little red letter opener...

Sent from my SAMSUNG-SM-N900A using Tapatalk
What happened to that corkscrew??
I wished I had my tourist/sportsman/soldier/compact/ with me today, the corkscrew of my Gourmet wasn't as handy as a can opener/combo-tool to remove a staple

Something is wrong. I bought this knife on ebay for about $3. The blade is fine, the combo tool doesn't have the sharp point I see on other knives, and cork screw doesn't retract. It might be the spring, it might be a worn corner on the cork screw. It's not great for pocket carry since it sticks out and pokes me.

Sent from my SAMSUNG-SM-N900A using Tapatalk
looks like your combo tool is shorter than mine



-
I won't take that personally; )
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
Day 29
My trusty Alox Rambler today:

NEED lanyards like that!
It's just a standard Victorinox lanyard, they're quite commonly available in black, orange or red.
Not over here they aren't.
$8 shipping costs on ebay bringing the total to $11 for 1 :(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
(yeah, hoped so
) 