Show off your Sak mod's!
-
Finally got the mini router bits through so here's the first production prototype. I don't know if I mentioned before but I got a big batch of these from the US (I think they were customs confiscations... hence nothing bladeless) - there were over 100 SDs in there so I need some outlet for them, and I have a large block of Yew so it seemed logical to enhance them (many have advertising on them as well, so I really need to change the scales). Surprisingly it seems like most of them have pretty much never been used, despite being somewhat scuffed...
The finish is Tung Oil (Danish oil basically) and the problem of how to stop the T&T falling out is a bit of a moot point - my problem is how to get them out easily as the slots are milled to such a tolerance they're actually a little stiff :( although I expect with use these will ease off a bit. To the gentleman who was asking about custom scales with T&T slots, Yes, I will be supplying these when I get the production sorted out so it runs a bit smoother, PM me for more details. Once I have the production sorted I see no reason that other materials can't be used - there are some very nice acrylics out there for the pen turning market that will quite nicely slice up to make scales... (I'm looking at some nice pearlescent green ones at the moment.. :)

-
New page banana man dance

-
I guess this belongs here: My first mod: A bladeless Cybertraveller Lite of sorts.
It runs on 3 batteries, is made almost entirely of plastic and liners, and does not like to get wet or dirty.
-TomNice, a great combination of tools for jobs like delicate electronics repair.
An excellent mod that I have never seen

-
There's some great things going on in this thread


-
Me thinks I need a tutoring session and a small moe sheen shop to did dis! But it sure looks fun yeah.
All those tiny parts, bushings, washers...wow...when I worked as an apprentice gunsmith in NC, in the shoppe we snickered and called it the "springs n things" syndrome.
If you had good sense in your noggin you learned to took stuff apart in such a way that a tiny spring didnt fly off into space and enter the black hole of forgetfulness!
but it sure is fun. -
So, here's a slightly re-organized Rambler with 3-ply brass scales with T&T slots.
-
2nd try
Here's a reorganized Rambler with 3-ply brass scales for the T&T.
-
@Rototype said:
Finally got the mini router bits through so here's the first production prototype. I don't know if I mentioned before but I got a big batch of these from the US (I think they were customs confiscations... hence nothing bladeless) - there were over 100 SDs in there so I need some outlet for them, and I have a large block of Yew so it seemed logical to enhance them (many have advertising on them as well, so I really need to change the scales). Surprisingly it seems like most of them have pretty much never been used, despite being somewhat scuffed...The finish is Tung Oil (Danish oil basically) and the problem of how to stop the T&T falling out is a bit of a moot point - my problem is how to get them out easily as the slots are milled to such a tolerance they're actually a little stiff :( although I expect with use these will ease off a bit. To the gentleman who was asking about custom scales with T&T slots, Yes, I will be supplying these when I get the production sorted out so it runs a bit smoother, PM me for more details. Once I have the production sorted I see no reason that other materials can't be used - there are some very nice acrylics out there for the pen turning market that will quite nicely slice up to make scales... (I'm looking at some nice pearlescent green ones at the moment.. :)
Like the yew

Did you oil them before fitting or after? I'm making some wood scales for my Apprentice that I'm planning to finish with Danish oil, and oiling the scales before fitting seems easier, but I'm not sure whether epoxy will stick to the oiled surface. -
Ok, I give up. Is there a way to post pictures from Google drive or Photos? Everything I've tried fails.
-
You can attach them directly to your post. Use the 'Attachments and other options' thingy below the reply box. There's a restriction on the number and size of images per post though.
-
@hiraethus said:
You can attach them directly to your post. Use the 'Attachments and other options' thingy below the reply box. There's a restriction on the number and size of images per post though.That's to attach from one's PC (upload). As you point out, there are size restrictions (and who has 1MB files these days?)
I have already uploaded my pictures to google Drive and Photos. But even when the are shared to "anyone with the link" they don't show up here when the link is inserted between IMG tags. Is there a trick?
-
@Bob Wolfson said:
You can attach them directly to your post. Use the 'Attachments and other options' thingy below the reply box. There's a restriction on the number and size of images per post though.
That's to attach from one's PC (upload). As you point out, there are size restrictions (and who has 1MB files these days?)
I have already uploaded my pictures to google Drive and Photos. But even when the are shared to "anyone with the link" they don't show up here when the link is inserted between IMG tags. Is there a trick?
The problem is on the Google side. Looking at the page source, the forum is emitting correctly formatted IMG tags in your posts. But navigating to the source of the image, e.g. https://lh3.googleusercontent.com/bE1Heu5RG4j63J9QXxHiApUYuQoorn-oOZ7GARl-xwuWyJF1dUa35qFgYouOAZydg24FDEBj=w1600-h766-rw , gives a 403 Forbidden error.
-
3rd try... Google makes it
UNBELIEVABLY HARD
to get a direct URL to an image in Drive! They won't just give it to you. You have to take what they supply, and delete/add parts in Notepad!! Really bad job, Google!
-
Looks great tho Bob

-
Just testing to see if it's easier to insert pictures from Google Photos. (Seems to be.)
-
@Bob Wolfson said:
3rd try... Google makes it
UNBELIEVABLY HARD
to get a direct URL to an image in Drive! They won't just give it to you. You have to take what they supply, and delete/add parts in Notepad!! Really bad job, Google!
Looks like you made the same mistake I did (on my Ti Rambler), the file is flipped and the coarse side is toward the scale

Nice scales BTW!
-
@Bob Wolfson said:
3rd try... Google makes it
UNBELIEVABLY HARD
to get a direct URL to an image in Drive! They won't just give it to you. You have to take what they supply, and delete/add parts in Notepad!! Really bad job, Google!
Looks like you made the same mistake I did (on my Ti Rambler), the file is flipped and the coarse side is toward the scale

Nice scales BTW!
No mistake! It's flipped so there's less chance of the T&T falling out when hanging from a key chain, and the nail nick for the file is more easily accessible behind the recurve in the spine of the bottle opener. (Even on a stock Rambler the coarse side is to the scale because V just uses the same file as on a Classic, where it sits on the same side as the blade. They should have mirrored it, imo.)
-
@Bob Wolfson said:
@Bob Wolfson said:
3rd try... Google makes it
UNBELIEVABLY HARD
to get a direct URL to an image in Drive! They won't just give it to you. You have to take what they supply, and delete/add parts in Notepad!! Really bad job, Google!
Looks like you made the same mistake I did (on my Ti Rambler), the file is flipped and the coarse side is toward the scale

Nice scales BTW!
No mistake! It's flipped so there's less chance of the T&T falling out when hanging from a key chain, and the nail nick for the file is more easily accessible behind the recurve in the spine of the bottle opener. (Even on a stock Rambler the coarse side is to the scale because V just uses the same file as on a Classic, where it sits on the same side as the blade. They should have mirrored it, imo.)
Really? the file coarse is toward the scale on stock Rambler?? (I don't have any Rambler to check, as the one I bought is now modded)
==> That would mean I didn't make a mistake when assembling it :ahhh :ahhh :ahhh
That's crazy !
-
@m47mu74nt said:
Really? the file coarse is toward the scale on stock Rambler?? (I don't have any Rambler to check, as the one I bought is now modded)
==> That would mean I didn't make a mistake when assembling it :ahhh :ahhh :ahhh
That's crazy !
Because the Rambler knife and file are the same as on the Classic, where they are on the same side in different slices, their nail nicks have to face opposite each other. When they are moved into the same slice on a Rambler, one nick must end up facing into the other slice. I chose to make it the file's, as did V, and as a result the coarse side is away from the other slice, i.e. to the scale.
But where V puts it alongside the scissors, I put it alongside the opener. There, its nick lines up perfectly behind the opener's inward curve. I find it a little easier to get to than when it's facing the scissors in V's configuration, though not as easy as when it faces the scale.
You could just as well have the file's nick face the scale and let the knife's face the middle behind the opener, but the knife gets used a lot and ought be very easy to open. It would have been nicest if V had made a mirror image of the file to use in the Rambler. Then all nicks could have faced scales.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login