What's your latest SAK?
-
@Aloha007 said:
Picked up this well used 84mm. I'm a sucker for the bale. Any idea about what date this is?Nice find and nice use of the magnifier!

@ThePeacent said:
Is it me or the Mountaineer weighs way more than similar sized SAKs? Must be the file that is so heavy?



[img]http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile Uploads/2016-09/CAM04675_zpscl0ygf

@cali-SAK-attack said:
CONGRATS on the awesome snag , Oxford (PIX!! ) , Jalind X3 (Diggin' the Ti ) , & AlohaThanks SAK Guy , Appreciate the comment , Bro

- Snagged up this Older Woodsman the other day , but it needed a few days at the Spa....... This sweet Unit is Sportin' "The Nature Store" LE black scales with Rabbit inlay. 8) :ahhh

-
@jalind said:
The Tinker with solid Copper Plus scales. Had to let some adhesive set on them while they were clamped onto the liners and didn't think to post a photo. Wasn't a "new" Tinker, but one left over from a batch I'd accumulated to harvest their Phillips drivers. I used the most thoroughly thrashed ones and kept the rest which were in excellent condition. Blade on this one has a scratch that will be easily polished out. As one might imaging, these scales make it heavy! They should develop a patina over time.
These and the Titanium I put on the Explorer Plus are something completely different! They completely change the feel and character of the knife with their heft. If I ever got a SwissChamp I'd probably move them to it, but I'm not planning on one into the foreseeable future.
John
That's just SAK-perfection!

-
@Aloha007 said:
Picked up this well used 84mm. I'm a sucker for the bale. Any idea about what date this is?From looking at sakhome.com, the most significant thing is the awl, which makes it pre-1961. The other markings and features are consistent with that and continued after the awl was redesigned. For example, the patent marking on the can opener continued until circa 1971. You can see a number of things on sakhome.com to help date a knife. Start with this page on his site as there's more detailed information there than in the SAKWiki (I use both to try to get a year range):
http://www.sakhome.com/305357099
See also sakhome.com's Victorinox Evolution page; down the left side menu in that section are details about the can opener, cap lifter, awl, etc.
http://www.sakhome.com/304372154
John
-
Red Alox Wenger Watch Opener, found somewhere that had this as brand new old stock! No branding either, unlike many of these models:
-
8) cool snag -
Picked up this well used 84mm. I'm a sucker for the bale. Any idea about what date this is?
From looking at sakhome.com, the most significant thing is the awl, which makes it pre-1961. The other markings and features are consistent with that and continued after the awl was redesigned. For example, the patent marking on the can opener continued until circa 1971. You can see a number of things on sakhome.com to help date a knife. Start with this page on his site as there's more detailed information there than in the SAKWiki (I use both to try to get a year range):
http://www.sakhome.com/305357099
See also sakhome.com's Victorinox Evolution page; down the left side menu in that section are details about the can opener, cap lifter, awl, etc.
http://www.sakhome.com/304372154
John
Thanks for the link. I appreciate the info
-
Picked up this Patagonia S18. My first yellow scale!

-
Picked up this well used 84mm. I'm a sucker for the bale. Any idea about what date this is?
Is that a wire stripper blade on the bottle opener?
Sent from my iPhone using Tapatalk
The inside of the bottle/cap lifter is sharpened if thats what you are referring to? Pretty smart design I think still makes sense today. Not sure why they stopped doing it.
-
Picked up this well used 84mm. I'm a sucker for the bale. Any idea about what date this is?
Is that a wire stripper blade on the bottle opener?
Sent from my iPhone using Tapatalk
I'd bet dollars to donuts it is, but cannot find any date range for when the bottle opener contained the "wire scraper" feature. The bail places it before the mid-1960's and the awl pre-1961 which sets an upper end. The question then for dating it is when various features were introduced to set the lower end of its age.
John
-
Picked up this well used 84mm. I'm a sucker for the bale. Any idea about what date this is?
Is that a wire stripper blade on the bottle opener?
I'd bet dollars to donuts it is, but cannot find any date range for when the bottle opener contained the "wire scraper" feature. The bail places it before the mid-1960's and the awl pre-1961 which sets an upper end. The question then for dating it is when various features were introduced to set the lower end of its age.
JohnThe bottle opener contained the wire stripper between 1951 and the early '80s
See the SAAMS blog - which contains some really useful tool dating images.
Links to this blog (and to the Vic info sheet from Urs Wyss, from where I think sakhome.com got a lot of his information) are in the 'Tools' section of SAKWIKI - at the bottom of the page.An exact date for Aloha's SAK has already been suggested in this post above...
@Huntsman said:
.......... No exposed rivets - Which would put it after 1960 - So I think we can say this knife was made sometime in 1961. Old awl but no visible rivets.
As we believe both those changes happened that year - But not at the same time - There are quite a few knives around like thisThis thread on MTo: ..... Something to help you date your Vic SAKS... is also pretty useful for dating your SAKs!! ;) :o :)
I looked at sakhome.com - There is a lot of good information there - But almost too much to assimilate >:(
- The table in the thread above is much better for dating !!

- The table in the thread above is much better for dating !!
-
Here's (finally) some pics of the Harvester I received last week:


-
@Oxford_Guy said:
Red Alox Wenger Watch Opener, found somewhere that had this as brand new old stock! No branding either, unlike many of these models:
-
@Barry Rowland said:
Picked up this Patagonia S18. My first yellow scale!Cool snag!
@Oxford_Guy said:
Here's (finally) some pics of the Harvester I received last week:

Very nice, always love to see the pruning blade!

-
Thanks guys! I like the way it carries and the yellow scales look sharp! -
Picked up this well used 84mm. I'm a sucker for the bale. Any idea about what date this is?
Is that a wire stripper blade on the bottle opener?
Sent from my iPhone using Tapatalk
I'd bet dollars to donuts it is, but cannot find any date range for when the bottle opener contained the "wire scraper" feature. The bail places it before the mid-1960's and the awl pre-1961 which sets an upper end. The question then for dating it is when various features were introduced to set the lower end of its age.
John
Interesting. Maybe it was a mod that someone did sometime earlier in its life? I've never seen this model of bottle opener before
Sent from my iPhone using Tapatalk
-
Picked up this well used 84mm. I'm a sucker for the bale. Any idea about what date this is?
Is that a wire stripper blade on the bottle opener?
I'd bet dollars to donuts it is, but cannot find any date range for when the bottle opener contained the "wire scraper" feature. The bail places it before the mid-1960's and the awl pre-1961 which sets an upper end. The question then for dating it is when various features were introduced to set the lower end of its age.
JohnThe bottle opener contained the wire stripper between 1951 and the early '80s
See the SAAMS blog - which contains some really useful tool dating images.
Links to this blog (and to the Vic info sheet from Urs Wyss, from where I think sakhome.com got a lot of his information) are in the 'Tools' section of SAKWIKI - at the bottom of the page.An exact date for Aloha's SAK has already been suggested in this post above...
@Huntsman said:
.......... No exposed rivets - Which would put it after 1960 - So I think we can say this knife was made sometime in 1961. Old awl but no visible rivets.
As we believe both those changes happened that year - But not at the same time - There are quite a few knives around like thisThis thread on MTo: ..... Something to help you date your Vic SAKS... is also pretty useful for dating your SAKs!! ;) :o :)
I looked at sakhome.com - There is a lot of good information there - But almost too much to assimilate >:(
- The table in the thread above is much better for dating !!

Thanks for the info! It's always cool to see different iterations of sak tools
Sent from my iPhone using Tapatalk
- The table in the thread above is much better for dating !!
-
NIB Climber with Long Nail File. 2009 -2010.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login