The test.
-
Good info there

I tried out my Soldier 2008 for the first time on some bamboo stems cut the previous day. I was removing their little branches with the Soldier and I realised some things, like:
-
Not ideal for the task this knife but it can be made to work
-
I sure need to get used to how to handle this knife
-
I must be very careful when using this knife... At some point the knife slipped and went through a stem thicker than my ring finger like if it weren't there :o
-
-
I tried out my Soldier 2008 for the first time on some bamboo stems cut the previous day. I was removing their little branches with the Soldier and I realised some things, like:
-
Not ideal for the task this knife but it can be made to work
-
I sure need to get used to how to handle this knife
-
I must be very careful when using this knife... At some point the knife slipped and went through a stem thicker than my ring finger like if it weren't there :o
I completely understand what you're saying. I've been practicing with mine alot for almost two year's. I figured if I'm going to carry it I better be able use. Which is one of the reasons I started this test.

-
-
This is a great thread, thank you !
Sent from my iPhone using Tapatalk
-
BTW I'm considering getting a Swisstool Spirit XC - this is the one with the blunt-tipped serrated "butter knife", I was wondering, though, are the serrations on this knife also as good as the ones on the knives discussed earlier in this thread? Are they (relatively) easy to sharpen? Would the round sharpener on a Lansky Medic be suitable to sharpen them, or is such a sharpener not necessary (I already have a Spyderco Sharpmaker)?:

-
Vic steel is soft so if I were using the diamond coated tapered thingy on it I'd do so very lightly.
As for the Spirit's butterknife blade, it works great for it's size (but I wouldn't want to do any whittling with it
). -
Thanx much for sharing your test

-
**@Oxford **
Do yer self a HUGE favor and snap up one of these for free hand touch ups.
link: around $12 new shipped in USA
http://www.ebay.com/itm/Spyderco-Sharpener-TRIANGLE-Ceramic-File-400F1T-NEW-/321044210160?hash=item4abfb9e1f0:m:mvgqvl0wlesvyW9j8Wv7KZAor for yer all around needs, BETTER yet , grab the "Sharp Maker" kit
link: around $40 used or around $60 new shipped in USA
http://www.ebay.com/itm/SPYDERCO-TRI-ANGLE-SHARPMAKER-KNIFE-SHARPENING-KIT-/182339170850?hash=item2a7442f222:g:2eoAAOSwo4pYGKf2 -
@cali-SAK-attack said:
**@Oxford **
Do yer self a HUGE favor and snap up one of these for free hand touch ups.
link: around $12 new shipped in USA
http://www.ebay.com/itm/S...m:mvgqvl0wlesvyW9j8Wv7KZAor for yer all around needs, BETTER yet , grab the "Sharp Maker" kit
link: around $40 used or around $60 new shipped in USA
http://www.ebay.com/itm/S...42f222:g:2eoAAOSwo4pYGKf2As I said, I already have a Spyderco Sharpmaker (with just the standard two sets of rods).is this suitable for sharpening the aérations?
-
I missed the part where ya said you already have the SPYDERCO SharpMaker
:-[Yep , you are Golden my friend....... IMPO - best unit and stone material,grits,and shapes for the job. Mr. Sal Glesser made these units with Serrations in mind.

-
@cali-SAK-attack said:
I missed the part where ya said you already have the SPYDERCO SharpMaker
:-[Yep , you are Golden my friend....... IMPO - best unit and stone material,grits,and shapes for the job. Mr. Sal Glesser made these units with Serrations in mind.

How do you use it to sharpen the serrations on the Swisstool Spirit blade, do you need to use on the rod corners or with the rods flat to the blade?
-
The Victorinox Dual-Knife Sharpener (https://www.victorinox.com/global/en/Products/Swiss-Army-Knives/Accessories/Dual-Knife-Sharpener/p/4.3323) works very well on the Spirit serrations - the elliptical sharpening rod makes it easy to sharpen one entire notch at a time.
-
I missed the part where ya said you already have the SPYDERCO SharpMaker
:-[Yep , you are Golden my friend....... IMPO - best unit and stone material,grits,and shapes for the job. Mr. Sal Glesser made these units with Serrations in mind.

How do you use it to sharpen the serrations on the Swisstool Spirit blade, do you need to use on the rod corners or with the rods flat to the blade?
Serrations = on corners

found this vid on the Tube.... guy uses Sharpmaker to sharpen a serrated spirit. :D
https://www.youtube.com/watch?v=ze7UlDqCKOEAnd "THE MAN" himself
https://www.youtube.com/watch?v=5LBDnJv5B58 -
I missed the part where ya said you already have the SPYDERCO SharpMaker
:-[Yep , you are Golden my friend....... IMPO - best unit and stone material,grits,and shapes for the job. Mr. Sal Glesser made these units with Serrations in mind.

How do you use it to sharpen the serrations on the Swisstool Spirit blade, do you need to use on the rod corners or with the rods flat to the blade?
Serrations = on corners

Okay, great!
-
I updated my comment w/ vids ^^

-
@cali-SAK-attack said:
I updated my comment w/ vids ^^
Thanks!

-
Great thread, a lot of good practical information. I'm feeling less afraid of using and sharpening my serrated blades. Thank you Gene!
-
@metasyntax said:
Great thread, a lot of good practical information. I'm feeling less afraid of using and sharpening my serrated blades. Thank you Gene!Glad I could help. I still plan on doing more testing but I'm doing the 111mm challenge and can only use my Soldier for the month or Nov.
Had an interesting thing happened the other day but could not take a pic at the time.
I was slicing some Turkey kielbasa sausage with my Soldier and the serrations cloged up with meat and failed to cut. Anyone ever experience a problem like this? Sorry I didn't have a camera to take a pic. -
What a great thread!!!!

-
@cali-SAK-attack said:
How do you use it to sharpen the serrations on the Swisstool Spirit blade, do you need to use on the rod corners or with the rods flat to the blade?Serrations = on corners

found this vid on the Tube.... guy uses Sharpmaker to sharpen a serrated spirit. :D
https://www.youtube.com/watch?v=ze7UlDqCKOEAnd "THE MAN" himself
https://www.youtube.com/watch?v=5LBDnJv5B58This thread on serrations - excellent.
The video above on sharpening the Spirit serrations - useless...he doesn't actually demonstrate how to sharpen serrations "because that's the way it is". Instead, he babbles on about "this that the other.. dadadadadada" for 13 minutes.
This thread was recently linked to - and I read the whole thing because I have this question myself... what are Vic serrations got for, and what are they not so good for.
-
Thanks for bringing this thread back to life, very good information indeed!

I don‘t have a lot of SAKs with serrations, but i am always somewhat hesitant to use the ones i own, as I have no idea how to sharpen them properly. Will try some of the techniques discussed here!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login