How is it…?
-
Victorinox have been continually refining the processes, as opposed to many makers who find a way of making knives "good enough", and either continuing the method ad infinitum, or running it for a few years, discontinuing it, and having to start over with a new design.
Not only has the design been refined, but the tolerances are very tight, the processes and instage inspection are such that the tolerances are adhered to. After working my whole life in manufacturing, I too am impressed with the resolution and repeatability of their processes.
All too often I've been involved in processes which have been less than 100% repeatable, and despite extensive manufacturing controls, have required some intervention along the process route, to realign the realisation of the component to it's design spec. Aside from occasional tooling breaks and machine problems, the vast majority of these were due to material inconsistencies - something that can be extremely difficult to factor into the equation.
I have withdrawn from projects a few times where making it properly would cost double or more what it costs to make it cheap. Market forces have dictated that the component must be made at the cheap price, but I was unwilling to supply the quality compromises that would entail. Victorinox however, manages to supply perfection for pennies. Many gripe at the lack of innovation that comes out of their door (me included), but the standards we expect from them come from decades of refinement, not from chucking out a myriad of shiny new gizmos every year to satiate the fickle masses.
Look how car technology improves year on year, then every so often a recall is announced. Some problems can't always be identified till you've racked up 40,000 miles in real life conditions. Victorinox product designs have been through that, and then ever so subtly tweaked again to maximise the value for every pound, dollar, or euro we give them. There are plenty of companies out there who innovate and bring out something exciting and new, but very few who bring you the same thing year on year, but always striving to make it just that little bit more perfect.
Innovation or perfection, it's a simple choice. Both are available to us, but it's by fluke not design that they may ever occur together, as in many ways one comes at the expense of the other.
-
I also am willing to bet that QC for them isn't pull 1% and test, or 10% and test, but test 100%, and if it doesn't pass, it doesn't ship. Get it right, or don't let anyone know you you didn't. But yes, consistant performance and refusing to settle is part of why I love Vics.
-
@ironraven said:
I also am willing to bet that QC for them isn't pull 1% and test, or 10% and test, but test 100%, and if it doesn't pass, it doesn't ship. Get it right, or don't let anyone know you you didn't. But yes, consistant performance and refusing to settle is part of why I love Vics.I suspect thatthat you are correct, 100% are tested, and dont ship if they aren't up to snuff.
Dont forget, with the exception of the Spartan (and another model I cant remember), all SAKs are "handmade", so testing is a fairly quick process after the SAK is put together.
-
In a bad way, Swiss knives and Japanese cars have spoiled me. I find I can't tolerate anything less than perfect in both performance and reliability anymore. Between my Toyota truck and Victorinox SAK, the bar has been set very high. Once one company proves that a very high standard is able to be achieved, then less so is not acceptable. I'm driving the same little Toyota Tacoma that I bought in 2001, and with 150,000 miles, has been totally reliable. It's crossed the country several times, and I just recently drove it to Mission Viejo California with no hesitation. I've never had a Ford or Chevy as good.
I went hunting once for a certain model Case pocket knife. At a knife shop I tried several, and they all had great variance in blade pulls, gaps and sloppy fit in the backspsrings and bolsters. Yet any Victorinox I look at is darn near perfect, if not absolutely perfect.
With modern close tolerance machining and modern CADCAM production methods, why should we settle for less?
-
@ironraven said:
I also am willing to bet that QC for them isn't pull 1% and test, or 10% and test, but test 100%, and if it doesn't pass, it doesn't ship. Get it right, or don't let anyone know you you didn't. But yes, consistant performance and refusing to settle is part of why I love Vics.Could be. Out of the few nib Alox knives I have they've all came with a few fingerprints and identical snappiness! ;) so maybe they were all hand tested for QC.

-
I think I've bought a few SAKs new, all the rest come with unknown history. I just got a SAK that can arguably be 40 years old and while there are a few issues the SAK as is can go right into service. Its quite an achievement in both engineering and manufacturing. As a matter of fact this SAK will go into service and will probably outlast me.
to Victorinox. -
@Aloha007 said:
I think I've bought a few SAKs new, all the rest come with unknown history. I just got a SAK that can arguably be 40 years old and while there are a few issues the SAK as is can go right into service. Its quite an achievement in both engineering and manufacturing. As a matter of fact this SAK will go into service and will probably outlast me.
to Victorinox.Finding used SAK's and putting them to use is a definite thrill. And think of the good karma you gain from the Swiss mountain gods!
-
Broken-in/pre-used SAKs are my favorite. ;)

![20161101_195621[1].jpg](/assets/uploads/_imported_attachments/migrated/291798_20161101_195621%5B1%5D.jpg)
-
Great story! Shipping a SAK ahead for a trip is an interesting idea!

-
I think I've bought a few SAKs new, all the rest come with unknown history. I just got a SAK that can arguably be 40 years old and while there are a few issues the SAK as is can go right into service. Its quite an achievement in both engineering and manufacturing. As a matter of fact this SAK will go into service and will probably outlast me.
to Victorinox.Finding used SAK's and putting them to use is a definite thrill. And think of the good karma you gain from the Swiss mountain gods!
NIB is fun and all but yes I like giving old forgotten SAKs much needed love and purpose.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login