What modded SAK Setup would you call perfect?
-
Already some good ideas I here

My idea so far ;) Is to start with a Champion, take it apart take out the small blade and replace it with the inline awl, take the scaler out, take the opening layer out and add in the blade of a Vic pruner. Someone checked and the pruner blade and openers are the same thickness so hopefully it will just be a drop in
That's about as far as I have planned ATM 
-
@Poncho65 said:
Already some good ideas I here
My idea so far ;) Is to start with a Champion, take it apart take out the small blade and replace it with the inline awl, take the scaler out, take the opening layer out and add in the blade of a Vic pruner. Someone checked and the pruner blade and openers are the same thickness so hopefully it will just be a drop in
That's about as far as I have planned ATM 
Sounds good so far poncho. If I was to send you some bottles of finest West Country Mead, how would you go about opening them? Maybe I'll have to not send them instead.
-
I really want to take a Ranger and build the knife from the Vic "Practical Tool set", by ditching the scissor/hook layer and replacing the corkscrew with a Phillips, since I don't use a corkscrew. I'd really like to replace the pen blade with a hawkbill pen blade, but the pen blade does an awesome job skinning wire. It will also have nylon handles. It will be perfect to backup regular tools, as in my little tool kit I keep in my backpack, I see no need for a dedicated saw, file, or wood chisel in that little kit. At present, I have a Camper in there.
-
Already some good ideas I here

My idea so far ;) Is to start with a Champion, take it apart take out the small blade and replace it with the inline awl, take the scaler out, take the opening layer out and add in the blade of a Vic pruner. Someone checked and the pruner blade and openers are the same thickness so hopefully it will just be a drop in
That's about as far as I have planned ATM 
Sounds good so far poncho. If I was to send you some bottles of finest West Country Mead, how would you go about opening them? Maybe I'll have to not send them instead.
I have a LM MT with me always :D But they may do you better than me as I am not really a drinker :D I have really been back and forth about the opening layer but with a pruner blade in it I think it will be better for me
I want to keep the backside awl as it is good for tasks that the inline one might not handle as well and vice versa with the inline doing some tasks better than the backside one and that is another reason for keeping something in that layer as well 
-
Any mod that contains a scissor and inline phillips is my most ideal... Couple Yeomans below...

Am currently doing an alox mod to try and incorporate an inline phillips into a Pioneer X...
In the meantime, some of my friends have just or are about to try out whittling and asked are discussing the ideal task to do this... This mod is what I came up with... It is similar to the SAK which is part of The Practical Tool Set... Come to think of it, As if the Camper is combined with the Clipper...

Sent from my iPhone using Tapatalk
-
@cody6268 said:
I really want to take a Ranger and build the knife from the Vic "Practical Tool set", by ditching the scissor/hook layer and replacing the corkscrew with a Phillips, since I don't use a corkscrew. I'd really like to replace the pen blade with a hawkbill pen blade, but the pen blade does an awesome job skinning wire. It will also have nylon handles. It will be perfect to backup regular tools, as in my little tool kit I keep in my backpack, I see no need for a dedicated saw, file, or wood chisel in that little kit. At present, I have a Camper in there.Except for ditching the scissors that sounds like a great SAK for me as well

-
@jaya_man said:
Any mod that contains a scissor and inline phillips is my most ideal... Couple Yeomans below...
Am currently doing an alox mod to try and incorporate an inline phillips into a Pioneer X...
In the meantime, some of my friends have just or are about to try out whittling and asked are discussing the ideal task to do this... This mod is what I came up with... It is similar to the SAK which is part of The Practical Tool Set... Come to think of it, As if the Camper is combined with the Clipper...

Sent from my iPhone using Tapatalk
Love the pics jaya
I am also in the way of thinking about the inline phillips and scissors

-
Any mod that contains a scissor and inline phillips is my most ideal... Couple Yeomans below...

Am currently doing an alox mod to try and incorporate an inline phillips into a Pioneer X...
In the meantime, some of my friends have just or are about to try out whittling and asked are discussing the ideal task to do this... This mod is what I came up with... It is similar to the SAK which is part of The Practical Tool Set... Come to think of it, As if the Camper is combined with the Clipper...

Sent from my iPhone using Tapatalk
Love the pics jaya
I am also in the way of thinking about the inline phillips and scissors


Sent from my iPhone using Tapatalk
-
I don't think pin stock will have to be bought as I am using a bigger SAK and making it small but what would be a good place to get pin stock here in the US
I know this question comes up quite often and I never can remember
:D -
The perfect SAK is the one that has enough features to cover most of your needs, and yet light enough to actually carry always.
For me the perfect one seems to be an 84mm alox with no more than two layers. The alox bantam has perfect weight and bulk for me, but has very limited features. So I tend to pocket carry a bantam or voyageur, and then try to bring along companion tools appropriate to whatever setting i'm in.
-
Office setting - A swisscard or my newfangled cybertraveller lite
-
Picnic - 111mm cheese SAK with either a saw or a GAK combo tool added(planned)
-
Forest stroll - alox harvester with main blade removed (planned)
-
Light duty tinkering - Mechanic jr with metal file added
-
light duty electrical - LM Style ES (planned)
Etc, etc...

-Tom -
-
For uneventful daily urban carry, my Sheepsfoot Duke mod has proved to be excellent, and as far mods go, they don't get much simpler. Take a DofE, reshape the round tipped blade to sheepsfoot - job done!
My Mega84 mod has proved excellent too. It's crammed full of features, including two main blades, inline awl, both corkscrew and backspring Phillips, and plenty of others, yet being 84mm is light enough and pocketable enough to not be omitted from carry for being cumbersome. It's a shame I never got chance for getting an 84mm with metal file at the right price.
I have wanted to do a Cybertool mod too, but have been to and fro on the design for quite a while. The latest version that's going through my mind is as follows..... (layer sequence not finalised)
Serrated main blade, pruner blade, (corkscrew)
Metal file (chisel)
Cybertool driver
Scissors (hook with nail file)
Opener layer (awl)Finally, I have a yearning to take a pioneer harvester and put wooden scales on it. It's a nice tool apart from those horrible alox scales. Can't decide whether adding scissors from a Pioneer X would round it off nicely or spoil it.....
-
Thanks for the input Tom and Trad

-
I have been carrying first a Tourist but later a Spartan for quite a long time now. I prefer a very small, pocketable approach and compliment it with a SwissCard or Classic. I was considering a Classic 101 for an improvement on the theme but I a locking blade seems like it would just be trouble when I look at it now. Thanks to this forum I have a Rancher coming and that seems promising and I'll carry it for a while and evaluate it but what I would really like to do is a Rancher with Cork Screw (does anyone know if it can be done somehow? 91 or 93 mm is unimportant).
-
Black Pioneer (with either black or red shield, don't mind) with scissors layer added and electrician's blade in place of the can opener. My perfect day-to-day knife: two blades, scissors, poky thing, pry bar and a beer opener.
I've tried other modded knives - Explorer with Pliers, SwissChamp minus saw and scaler, Ranger + magnifier/phillips, etc. but for a larger SAK a Cybertool 34 is perfect already, and for a slim one either a Tinker or Electrician hits the spot.
-
@hiraethus said:
Black Pioneer (with either black or red shield, don't mind) with scissors layer added and electrician's blade in place of the can opener. My perfect day-to-day knife: two blades, scissors, poky thing, pry bar and a beer opener.I've tried other modded knives - Explorer with Pliers, SwissChamp minus saw and scaler, Ranger + magnifier/phillips, etc. but for a larger SAK a Cybertool 34 is perfect already, and for a slim one either a Tinker or Electrician hits the spot.
Some good thoughts in this

-
I am one SAK closer to being able to do this mod and only one SAK away from having all the donors now
If I can get the courage and the time to start taking them apart
I will document it as I go 
-
Can't wait

Sent from my iPhone using Tapatalk
-
-
Can't wait


Get on with it man.

Didn't realize you were waiting for

Sent from my iPhone using Tapatalk
-
I still have to source a reasonably priced in-line awl :ahhh After that it should be a go though

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
