Show off your Sak mod's!
-
Looks great tho Bob

-
Just testing to see if it's easier to insert pictures from Google Photos. (Seems to be.)
-
@Bob Wolfson said:
3rd try... Google makes it
UNBELIEVABLY HARD
to get a direct URL to an image in Drive! They won't just give it to you. You have to take what they supply, and delete/add parts in Notepad!! Really bad job, Google!
Looks like you made the same mistake I did (on my Ti Rambler), the file is flipped and the coarse side is toward the scale

Nice scales BTW!
-
@Bob Wolfson said:
3rd try... Google makes it
UNBELIEVABLY HARD
to get a direct URL to an image in Drive! They won't just give it to you. You have to take what they supply, and delete/add parts in Notepad!! Really bad job, Google!
Looks like you made the same mistake I did (on my Ti Rambler), the file is flipped and the coarse side is toward the scale

Nice scales BTW!
No mistake! It's flipped so there's less chance of the T&T falling out when hanging from a key chain, and the nail nick for the file is more easily accessible behind the recurve in the spine of the bottle opener. (Even on a stock Rambler the coarse side is to the scale because V just uses the same file as on a Classic, where it sits on the same side as the blade. They should have mirrored it, imo.)
-
@Bob Wolfson said:
@Bob Wolfson said:
3rd try... Google makes it
UNBELIEVABLY HARD
to get a direct URL to an image in Drive! They won't just give it to you. You have to take what they supply, and delete/add parts in Notepad!! Really bad job, Google!
Looks like you made the same mistake I did (on my Ti Rambler), the file is flipped and the coarse side is toward the scale

Nice scales BTW!
No mistake! It's flipped so there's less chance of the T&T falling out when hanging from a key chain, and the nail nick for the file is more easily accessible behind the recurve in the spine of the bottle opener. (Even on a stock Rambler the coarse side is to the scale because V just uses the same file as on a Classic, where it sits on the same side as the blade. They should have mirrored it, imo.)
Really? the file coarse is toward the scale on stock Rambler?? (I don't have any Rambler to check, as the one I bought is now modded)
==> That would mean I didn't make a mistake when assembling it :ahhh :ahhh :ahhh
That's crazy !
-
@m47mu74nt said:
Really? the file coarse is toward the scale on stock Rambler?? (I don't have any Rambler to check, as the one I bought is now modded)
==> That would mean I didn't make a mistake when assembling it :ahhh :ahhh :ahhh
That's crazy !
Because the Rambler knife and file are the same as on the Classic, where they are on the same side in different slices, their nail nicks have to face opposite each other. When they are moved into the same slice on a Rambler, one nick must end up facing into the other slice. I chose to make it the file's, as did V, and as a result the coarse side is away from the other slice, i.e. to the scale.
But where V puts it alongside the scissors, I put it alongside the opener. There, its nick lines up perfectly behind the opener's inward curve. I find it a little easier to get to than when it's facing the scissors in V's configuration, though not as easy as when it faces the scale.
You could just as well have the file's nick face the scale and let the knife's face the middle behind the opener, but the knife gets used a lot and ought be very easy to open. It would have been nicest if V had made a mirror image of the file to use in the Rambler. Then all nicks could have faced scales.
-
Finally received the screws I was waiting for, and was able to fit a pocket clip on my Electrician X.

-
@Bob Wolfson said:
Really? the file coarse is toward the scale on stock Rambler?? (I don't have any Rambler to check, as the one I bought is now modded)
==> That would mean I didn't make a mistake when assembling it :ahhh :ahhh :ahhh
That's crazy !
Because the Rambler knife and file are the same as on the Classic, where they are on the same side in different slices, their nail nicks have to face opposite each other. When they are moved into the same slice on a Rambler, one nick must end up facing into the other slice. I chose to make it the file's, as did V, and as a result the coarse side is away from the other slice, i.e. to the scale.
But where V puts it alongside the scissors, I put it alongside the opener. There, its nick lines up perfectly behind the opener's inward curve. I find it a little easier to get to than when it's facing the scissors in V's configuration, though not as easy as when it faces the scale.
You could just as well have the file's nick face the scale and let the knife's face the middle behind the opener, but the knife gets used a lot and ought be very easy to open. It would have been nicest if V had made a mirror image of the file to use in the Rambler. Then all nicks could have faced scales.
Thank you for your explanation!
-
An Executive (74mm) with a bottle opener/phillips driver transplanted from a Rambler (58mm). Because it's nice to have a longer blade and still be able to open your beer.

-
@Bob Wolfson said:
An Executive (74mm) with a bottle opener/phillips driver transplanted from a Rambler (58mm). Because it's nice to have a longer blade and still be able to open your beer.
Nice mod Bob
What back spring did you use to make this work with the bottle opener/phillips driver

-
@Poncho65 said:
Nice mod Bob
What back spring did you use to make this work with the bottle opener/phillips driver

3 knives went into this - 2 Executives and a Rambler. The Rambler just provided the bottle opener.
The 2 Execs provide one full thickness pair of springs for the long and short knife blades in layer 1 (as usual for an Exec), and in layer 2 there are 4 half-thick springs arranged as in a Classic, for the file and peeler (each half thick) and bottle opener (full thick). (A normal Exec has 2 springs for the file and peeler).
The leftover parts are good for making a Classic SD, and a one-layer 74mm knife with scissors and a long and short blade. You wind up with an orphan file and peeler.
-
@Bob Wolfson said:
Nice mod Bob
What back spring did you use to make this work with the bottle opener/phillips driver

3 knives went into this - 2 Executives and a Rambler. The Rambler just provided the bottle opener.
The 2 Execs provide one full thickness pair of springs for the long and short knife blades in layer 1 (as usual for an Exec), and in layer 2 there are 4 half-thick springs arranged as in a Classic, for the file and peeler (each half thick) and bottle opener (full thick). (A normal Exec has 2 springs for the file and peeler).
The leftover parts are good for making a Classic SD, and a one-layer 74mm knife with scissors and a long and short blade. You wind up with an orphan file and peeler.
Thanks for the explanation


-
Finally completed this custom Golfer 84mm... First time to work with Copper... Finishing could be better...





Sent from my iPhone using Tapatalk
-
That is lush J Man! Lush!
-
-
Stunning mate. I'm loving the color play between the brass pins and the copper scales.

Is it going to be a shelf queen or a user ?
-
-
-
New page
8) -
Finally completed this custom Golfer 84mm... First time to work with Copper... Finishing could be better...





Sent from my iPhone using Tapatalk
Nice.

Thanks H

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login