Non locking blade mechanisms?
-
@Grant Lamontagne said:
What about something like the Okapi knives?https://en.wikipedia.org/wiki/Okapi_(knife)

Some have a rocker type "lock" and others use a ring and pin type "lock." I wouldn't call them locks in the way that we know lockbacks, liner locks, frame locks, Axis locks, LAWKS, lever locks, button locks etc, they are sort of in between locks and slippies with backsprings.
Def
Don't think those would be allowed for normal carry in the UK
-
@Oxford_Guy said:
The slipjoint mechanism used in the (UK-legal) Spyderco PITS is quite unique and very clever:https://www.spyderco.com/forumII/viewtopic.php?t=66728

- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Thats pretty neat, but still feel like a slightly different version of a backspring to me since it still contacts the blade and provides resistance the same way its just build into the handle. I dont think that solution would translate well into a multi layered knife.
-
I have nothing useful to add at all.

But while this thing has a open position detent, I don't think it locks as such:
https://www.youtube.com/watch?v=Nphh8E1iWpQ -
Case at one time offered a Tri-Fold knife, where the handle opened, the blade was swung out, and the handle closed to use the knife. Different and slow, and would probably be considered a locking knife.

-
@ColoSwiss said:
Case at one time offered a Tri-Fold knife, where the handle opened, the blade was swung out, and the handle closed to use the knife. Different and slow, and would probably be considered a locking knife.Yes probably considered locking but thats a new one to me. Thanks.
-
Multi layered will make it harder. I have no idea how to go multiple layers with it, but for a single blade you could go sideways opening like the Boker magnum neck knife. You would have to remove the locking mechanism and add an extension/spoon/paddle to the tang end of the blade, so that once you spun the blade out of the handle you would close your hand around the handle and thus trap the tang extension in your hand so it couldn't spin around again until you opened your hand. Perhaps the tang extension could house your SAK type of tools which could open in normal slip joint manner when the knife blade was rotated into the handle because when the knife blade was tucked into the handle, the opposite end of the tang with the tools would obviously be out of the handle.

-
@ColoSwiss said:
Case at one time offered a Tri-Fold knife, where the handle opened, the blade was swung out, and the handle closed to use the knife. Different and slow, and would probably be considered a locking knife.I seem to recall Cold Steel doing something similar? The Triple Action Folder or something?
Def
-
Böker did another unusual lock with the Hawk designed Griploc.
404 Not Found
150 years of Boker manufacturing... For over 150 years, we have been handcrafting the famous knives with the world-renowned tree logo in the blade city of Solingen...
Böker Solingen (www.boker.de)
Looks gimmicky to me, but since we are discussing the border between locking and non-locking...
-
So I came up with this half way through the thread before seeing the Spyderco one

The fact that the Spyderco one "tightens" as you squeeze the back is emminently more sensible.
-
@ColoSwiss said:
Case at one time offered a Tri-Fold knife, where the handle opened, the blade was swung out, and the handle closed to use the knife. Different and slow, and would probably be considered a locking knife.Similar to this, Boker has the Boker Fred Perrin Quattro Manual Folding Knife 2-1/2" Blade.

- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
The Fred Perrin TriFold in action:
https://www.youtube.com/watch?v=hjgzduaVPP0 -
I don't have an answer for that but I like the idea of both locking driver and saw

Locking saw could cause problems in the UK.
Locking drivers are fine
Locking awl might also be a problem
-
Another option I thought about it :
A friction or slip folder with a hole in the handles and inside the blade between them
When you deploy the blade you can pass through a removible pin like a latch.
To do so the axis of rotation must be a little behind from his typical position.
I would put drawings soon.Scheme:
Scale extreme - axis of rotation of the blade - hole for pin latch - scale extreme.
If you don, t put the pin it would be uk legal, because is only a friction or slipjoint knife, but you can always carry the pin-latch inside your pocket and having the possibility of transform the knife into a locking blade

-
Yea but, the hole would be obvious and then the policeman would search you for a pin?
You might get around that problem by using random pencils, sticks, etc as a pin though, so would that knife be still illegal? :D
-
@alexTOOL said:
Another option I thought about it :A friction or slip folder with a hole in the handles and inside the blade between them
When you deploy the blade you can pass through a removible pin like a latch.
To do so the axis of rotation must be a little behind from his typical position.
I would put drawings soon.Scheme:
Scale extreme - axis of rotation of the blade - hole for pin latch - scale extreme.
If you don, t put the pin it would be uk legal, because is only a friction or slipjoint knife, but you can always carry the pin-latch inside your pocket and having the possibility of transform the knife into a locking blade

Ingenious, but sounds like a bit of a grey area legal-wise, and also likely to be too fiddly in practise
-
Another option I thought about it :
A friction or slip folder with a hole in the handles and inside the blade between them
When you deploy the blade you can pass through a removible pin like a latch.
To do so the axis of rotation must be a little behind from his typical position.
I would put drawings soon.Scheme:
Scale extreme - axis of rotation of the blade - hole for pin latch - scale extreme.
If you don, t put the pin it would be uk legal, because is only a friction or slipjoint knife, but you can always carry the pin-latch inside your pocket and having the possibility of transform the knife into a locking blade

Ingenious, but sounds like a bit of a grey area legal-wise, and also likely to be too fiddly in practise
Very easy:

-
The CRKT Journeyer is a variant of the idea.
-
Nice
-
^^^
Thats wonderfully clever
-
For multi layer, assuming you're using a liner between each layer, you could make a cut out like a lock bar. But instead of having two sufaces that engage and lock, just use two holes and a steel shpere as detent when opened and closed.
It is not original, but simple to make, as all you'll need to do is to get the cut out and the hole cut/machined, fit the sphere, and machine the holes on the implement.
A real complicated way would be to machine a continous step on the blades/implements to act like a cam, and have the handles acting like a spring that will create a lot of friction when the cam is on the highest position.
btw: forgive me for any misspelling or grammar mistakes
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



