Newbie saying hello :)
-
Welcome to the forum!

I hope that you will enjoy this place! :)
Oh and... Pictures! ;) -
Welcome to
Paulus 
-
Welcome!
Sounds like we could be brothers...
-
Many thanks chaps & so the car then - not sure if you'll have heard of it as only 1500 or so were ever made. It's a Reliant Scimitar SS1 - built on a production line (of sorts) in the UK (apart from the chassis which was built in Germany for some reason) in 1985. Since then it's probably had 100's (not really) of caring owners until about 8 years ago when it became mine. I ran it for a year or so but then decided to take it off the road & upgrade/change various bits & pieces. Upgraded parts include the suspension (new shocks/springs & polyurethane bushes throughout) & brakes (vented discs, new calipers, braided hoses & a general reconditioning/replacement of parts throughout the system). Changed parts include the engine (from Ford 1600 CVH to rebuilt Ford 1800 Zetec - so keeping it in the Ford family & the new engine mates up to the gearbox without too many problems), seats (mk1 MX5/Miata), steering wheel (fairly mundane mod but getting a boss kit to fit was quite a challenge), clutch/flywheel etc, ignition system (no distributor on the Zetec so using a megajolt) & inlet manifold/carb (didn't fit injection as I thought a carb would be simpler ....... wrong!).
Took me 4 years & I finally got it back on the road 3 or 4 years ago. It's a hoot to drive, fast enough to get you in trouble but not fast enough to get you into THAT much trouble & I get a buzz every time I drive it (which at this time of year is not very often :( ).
<a href="http://s9.photobucket.com/user/pauluspaolo/media/02SS1LHS_zps68af1ef3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i9.photobucket.com/albums/a88/pauluspaolo/02SS1LHS_zps68af1ef3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s9.photobucket.com/user/pauluspaolo/media/R0014693_zpsdc266b69.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i9.photobucket.com/albums/a88/pauluspaolo/R0014693_zpsdc266b69.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s9.photobucket.com/user/pauluspaolo/media/R0014700_zpsaf4c6a33.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i9.photobucket.com/albums/a88/pauluspaolo/R0014700_zpsaf4c6a33.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s9.photobucket.com/user/pauluspaolo/media/R0014695_zps8c694222.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i9.photobucket.com/albums/a88/pauluspaolo/R0014695_zps8c694222.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s9.photobucket.com/user/pauluspaolo/media/R0014694_zpsc84c0e34.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i9.photobucket.com/albums/a88/pauluspaolo/R0014694_zpsc84c0e34.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Happy to answer any questions you may have about it ..... if I don't know the answers then I'll make them up :D :)
-
I've never actually seen one of those, and as someone who handled European import cars (new and used) for years, I have seen first hand a lot of cars that no one else has!
Is it a convertible or does it just look that way? I really love English 2 seat roadsters like the Midgets and Triumphs, and that one looks very sweet!
Congratulations on having such a beautiful little car! You must be super proud!
Def
-
Many thanks indeed :) It's a soft top with removable hard top which is fitted in the photos. I have 2 soft tops both of which need considerable amounts of repair work (beyond my meagre skills I'm afraid). The hard top has a sunroof in it so when I feel the need to go topless, & when the weather allows, I remove the sun roof & wind both windows down. It's not really the same as going fully topless (at all) but it'll do for me until I can get one of the soft tops repaired. I could of course drive the car without any sort of roof but the last time I did that I got done for speeding & you run the risk of the great British weather turning the interior of your open topped sports car into a water feature :o not to mention undesirable characters doing other water related things to your waist high pride & joy!! The upside to the hard top is that weather protection is better (though it does leak slightly ::) ) & the car is a bit more rigid & creaks a bit less when going round corners! Only joking about the last point as the car's as rigid as it can be (the roll bar behind the seats helps) & none of the panels are structural. All the panels are separate & mounted on frames which then are bolted to the chassis, this makes accident repairs fairly simple but getting the panel gaps even is a complete nightmare. Also something that may not be immediately obvious from the photos is that the headlights flip forward like a Porsche 928 (about the only thing the car has in common with a 928!!) :)
-
I have a couple of Jeeps and I am also quite paranoid about leaving it unattended with the top down. One suggestion I might have is when you are getting your soft tops redone, consider getting a clear panel put in one of them. Here is a photo of my older Jeep with the clear panel in the top. It gives you the feeling that the top is down, even when it isn't. And, it won't muss up your hair! :D
Def
-
Oops. Forgot the photo.
Def

-
welcome mate
-
Welcome to MTO.
-
Welcome aboard.. nice little rucksack

JR -
@pauluspaolo said:
Many thanks chaps & so the car then - not sure if you'll have heard of it as only 1500 or so were ever made. It's a Reliant Scimitar SS1 - built on a production line (of sorts) in the UK (apart from the chassis which was built in Germany for some reason) in 1985. Since then it's probably had 100's (not really) of caring owners until about 8 years ago when it became mine. I ran it for a year or so but then decided to take it off the road & upgrade/change various bits & pieces. Upgraded parts include the suspension (new shocks/springs & polyurethane bushes throughout) & brakes (vented discs, new calipers, braided hoses & a general reconditioning/replacement of parts throughout the system). Changed parts include the engine (from Ford 1600 CVH to rebuilt Ford 1800 Zetec - so keeping it in the Ford family & the new engine mates up to the gearbox without too many problems), seats (mk1 MX5/Miata), steering wheel (fairly mundane mod but getting a boss kit to fit was quite a challenge), clutch/flywheel etc, ignition system (no distributor on the Zetec so using a megajolt) & inlet manifold/carb (didn't fit injection as I thought a carb would be simpler ....... wrong!).Took me 4 years & I finally got it back on the road 3 or 4 years ago. It's a hoot to drive, fast enough to get you in trouble but not fast enough to get you into THAT much trouble & I get a buzz every time I drive it (which at this time of year is not very often :( ).
<a href="http://s9.photobucket.com/user/pauluspaolo/media/02SS1LHS_zps68af1ef3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i9.photobucket.com/albums/a88/pauluspaolo/02SS1LHS_zps68af1ef3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Happy to answer any questions you may have about it ..... if I don't know the answers then I'll make them up :D :)
Wow! Great set of wheels! A limited edition like that really deserves all that TLC. Looks like something from a 007 movie.

And, of course...
General Reconditioning!

-
Welcome aboard! Nice car!
-
Welcome aboard!

-
Welcome aboard!! ;cheers:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





