Let's see your sharpening stones/gear!
-
-
@hiraethus said:
My sharpening stuff:

Clockwise from top left: Lansky standard system, Lansky Turnbox, 400/1000 diamond plate, Victorinox pocket sharpener, and three oilstones given to me by Sparky415 - coarse, medium and fine.
-
@hiraethus said:
My sharpening stuff:

Clockwise from top left: Lansky standard system, Lansky Turnbox, 400/1000 diamond plate, Victorinox pocket sharpener, and three oilstones given to me by Sparky415 - coarse, medium and fine.

-
Nice bunch of gear Hi

-
-
Great bunch of sharpening gear

-
Have you used the stones yet H?
-
@Sparky415 said:
Have you used the stones yet H?Only the little fine slip stone. Tidied the edge on knife using the diamond plate last night and finished it with the slip. Very nice.

-
@Sparky415 said:
Have you used the stones yet H?Also just rereading this and good on you Sparky for giving the stones to Hi

-
Got a traditional stone in to try.
Nice stone SG have you had a chance to use it much yet?

Nah, dang it! I'm still wondering what oil I'm gonna use.....every time I look it up, I get to looking at something else and ..... well, you know.

Yes all to well
I internet wander when trying to look for things most any time I try to look for something
:DHave you narrowed your choices down yet

-
How well does the lansky turnbox work for you all, those who have it or similar?
I got one today, it has medium and fine ceramic rods, with the option of 20 or 25 degrees per side.
Can you restore an edge with it? I was able to freehand an smooth edge(sorta) on a small folder that had lots of little nicks, but I have no idea what its angle is... ::)
What about maintaining SAK edges with it solely? -
Got a traditional stone in to try.
Nice stone SG have you had a chance to use it much yet?

Nah, dang it! I'm still wondering what oil I'm gonna use.....every time I look it up, I get to looking at something else and ..... well, you know.

Yes all to well
I internet wander when trying to look for things most any time I try to look for something
:DHave you narrowed your choices down yet

Can't decide.... will probably go with a can of Norton oil. Would try water but that Norton stone is already precharged with oil so don't know if that would work. ???
-
[quote author=SAK Guy link=topic=67335.msg1367253#msg1367253 date=1477362986]
Got a traditional stone in to try.Nice stone SG have you had a chance to use it much yet?

Nah, dang it! I'm still wondering what oil I'm gonna use.....every time I look it up, I get to looking at something else and ..... well, you know.

Yes all to well
I internet wander when trying to look for things most any time I try to look for something
:DHave you narrowed your choices down yet

Can't decide.... will probably go with a can of Norton oil. Would try water but that Norton stone is already precharged with oil so don't know if that would work. ???
[/quote]Yeah I don't know much about oilstones
SO don't know how that would work ::) :D Hopefully whatever you do pick works though

-
Have you used the stones yet H?
Only the little fine slip stone. Tidied the edge on knife using the diamond plate last night and finished it with the slip. Very nice.

Those little ones can be very useful

Have you used the stones yet H?
Also just rereading this and good on you Sparky for giving the stones to Hi

I didn't want to carry them home from the meet as my car was full of axes ;)
-
[quote author=SAK Guy link=topic=67335.msg1367253#msg1367253 date=1477362986]
Got a traditional stone in to try.Nice stone SG have you had a chance to use it much yet?

Nah, dang it! I'm still wondering what oil I'm gonna use.....every time I look it up, I get to looking at something else and ..... well, you know.

Yes all to well
I internet wander when trying to look for things most any time I try to look for something
:DHave you narrowed your choices down yet

Can't decide.... will probably go with a can of Norton oil. Would try water but that Norton stone is already precharged with oil so don't know if that would work. ???
[/quote]
Sounds like Norton oil would be a safe way to go. -
[quote author=Poncho65 link=topic=67335.msg1380539#msg1380539 date=1479418554]
[quote author=SAK Guy link=topic=67335.msg1367253#msg1367253 date=1477362986]
Got a traditional stone in to try.Nice stone SG have you had a chance to use it much yet?

Nah, dang it! I'm still wondering what oil I'm gonna use.....every time I look it up, I get to looking at something else and ..... well, you know.

Yes all to well
I internet wander when trying to look for things most any time I try to look for something
:DHave you narrowed your choices down yet

Can't decide.... will probably go with a can of Norton oil. Would try water but that Norton stone is already precharged with oil so don't know if that would work. ???
[/quote]Yeah I don't know much about oilstones
SO don't know how that would work ::) :D Hopefully whatever you do pick works though

[/quote]Thanks Ponch!!

-
[quote author=Poncho65 link=topic=67335.msg1380539#msg1380539 date=1479418554]
[quote author=SAK Guy link=topic=67335.msg1367253#msg1367253 date=1477362986]
Got a traditional stone in to try.Nice stone SG have you had a chance to use it much yet?

Nah, dang it! I'm still wondering what oil I'm gonna use.....every time I look it up, I get to looking at something else and ..... well, you know.

Yes all to well
I internet wander when trying to look for things most any time I try to look for something
:DHave you narrowed your choices down yet

Can't decide.... will probably go with a can of Norton oil. Would try water but that Norton stone is already precharged with oil so don't know if that would work. ???
[/quote]
Sounds like Norton oil would be a safe way to go.
[/quote]Thanks Dean!!

-
@Pablo O'Brien said:
How well does the lansky turnbox work for you all, those who have it or similar?
I got one today, it has medium and fine ceramic rods, with the option of 20 or 25 degrees per side.
Can you restore an edge with it? I was able to freehand an smooth edge(sorta) on a small folder that had lots of little nicks, but I have no idea what its angle is... ::)
What about maintaining SAK edges with it solely?I have it but wouldn't use it to restore an edge really. It is perfect for maintaining edges and unless you buy mistreated blades that's all you should hopefully ever need to do.
-
Erm... Hi, my name is Pablo and I buy mostly mistreated blades.

It seems to work for me anyway, I've "fixed" a bad edge or two so far. :)
I had one edge on a cheap carbon steel blade that was ragged from me trying to use a kitchen sharpener( :ahhh :-[). I sharpened the nicks out mostly by using the grey rods in a half-smurfed freehand way to remove most of the nicks, then setting the edge with the actual set angles. It slices decently now and looks fine. :)
Lesson learned and practice gained.Good to know from someone else that its great for blade maintenance though, thank you very much. :)
I assume that this type of sharpener is all you really need for a couple of pocket knives, and better equipment is needed for fancy knives?
Oh, and I will get a strop for touching up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login