Gdoolittle's NLC 1,000th post GAW
-
Well ill be honest, when I first joined MTO, I never expected to come anywhere near the NLC. Now, about 70 MTs later, I have gained so much knowledge, made many friends, and discovered that the internet consists of more than just cat videos and crazy people posting on social media. I haven't been around here nearly as long as some and I am not nearly as knowledgeable as some, but I feel just as accepted as anyone here. I think that this is by far the greatest social place on the internet for anyone interested in MTs, or even just plain knives or other gear for that matter. Unlike any other place I have visited, there is a sense of community and friendship here. I have also never met such a generous and trusting bunch of people on the internet. I am very glad to be a part of this place.
So, for my 1,000th post here on MTO, I would like to host a giveaway. The prize is not as amazing and unique as many that I have seen and participated in here, but I hope that it will bring a MTO member here happiness and see some pocket time and use. For the prize today I have a NIB Wenger Standard Issue with the bail (see pics below).
Now, the rules:
-
must have at least 350 posts to enter
-
in your entry post, tell a story about one of the following: a time that a MT or SAK got you out of a serious (or funny) jam, a great (or funny) experience had here at MTO or relating to knives/MTs in general, or pick your own story relating to knives/mts in some way (as indirectly or directly as you want). Make your stories as long or as short as you like, and as serious or as funny as you prefer. I will enjoy reading them!
-
try to keep a list going for me, so that way when I pick a number, I can just reference the list to find the winner.
Ex:
01 - John Smith
02 - Jane Doe
And so on -
the winner will be randomly picked on Wednesday (11/23) hopefully in the morning. I may push it back until after thanksgiving if needed. The prize will most likely be shipped after the holiday weekend.
-
Good luck everyone and thanks for letting me be a part of the community here at MTO!





-
-
Nice GAW! But I haven't got stories to tell... so count me out :(
Good luck to all who follows!
-
Congrats on hitting 1k. now where is the chicken?
-
@Mechanickal said:
Nice GAW! But I haven't got stories to tell... so count me out :(Good luck to all who follows!
Everyone has a story!
it can be 1 sentence if you like. "One time, I used a screwdriver." 
-
Congrats GD-Lizzle! Great GAW too

My story relates to the first SI I owned, which I cherished (and still have), but carried around for a FULL WEEK before discovering the AWL
The shame.000000000001 - Magentus
-
Ok, got lucky today...
Today I helped my brother in law move from his tiny apartement to his tiny house (don't know why he get's everything tiny...
)So it was the usual stuff:
Taking apart the closets, bed, cupboards etc. Move them downstairs on the trailer, move to the new location and rebuild the whole stuff.
Ofcoarse, the only thing he didn't think of was equipment...
We needed screwdrivers to take apart the furniture and some wire cutters to cut zip-ties that he used underneath the bed to tie some electric wiring for the system that tilts the bed.The lights on top of the closet were in the way of loading it in the trailer, so they needed to come off too...
Luckily I'm a
-member and I never leave the house without atleast some minimal toolset.The Spartan was in my pocket, the Swisstool X in my bag.
We took apart every single piece of furniture with those 2 tools.
And we got them back in one piece too!
The Swisstool came quite in handy as a hammer to get every wooden panel back in it's place.So that's it, my bacon saved for today!
1 magentus
2 Mechanickal -
Very generous of you. Again Congrats on NLC and good luck to all.
I'll sit out but only because I have an SI that mostly sits looking awesome rather than get used.I'll share a story tho, My friends know I like MTs and SAKs so whenever we hang out they know I"ll have one or five on me. I took a trip to Nevada with one and what she didn't know was we like pictures of our MTs and SAKs as well. We went hiking in Red Rock when all of a sudden I put my Swisschamp on a rock and step back to take a picture. She didn't say a word but gave me such a look. She then unbeknownst to me took a picture of me taking a picture of my SAK. Later throughout the trip she would just pause while I snapped pics of my tools during the trip.
I can't seem to find the picture but I've posted here on MTO. Anyway good luck to all.
-
Great stories so far!
-
Congrats on the NLC

I'm going to sit out cause I already have a nice SI

-
Congrats on having No Life! Thanks also for the GAW. I always enjoy good MT stories and it just so happens I have several, but one that stands out was something that happened about 16 or 17 years ago. I was scouting a hunting area 2 hours west of town and about 20 miles from the nearest road and I drove into a crevasse. The left front wheel of the truck went down over a foot and the impact of the frame hitting the ground was quite jarring. Everything went dead. Got out and opened the hood and discovered that the positive wire had been ripped out of the lead, which was still attached to the battery. No problem, we'll just loosen the lead and reattach the wire. Then I discovered I didn't have any tools with me. I'd left them at home. I had a SAK alike knife in my pocket (my Hoffritz Partner, same tools as a Fieldmaster or Craftsman, but made in Germany) so I could turn the slotted bolt without a problem using the large screw driver / cap lifter. The problem was I didn't also have a pliers or a wrench to hold onto the nut on the other side to keep it from spinning along while I was turning the bolt. I went to the side of the trail with the saw open on the Partner and I cut a green twig a little thinner than a pencil and about six inches long, from what I believe was a Florida Live Oak. I was able to stick the twig between the nut and the battery and after a couple of turns the twig had been drawn in snugly and wedged the nut so it wouldn't turn. I was able to remove the lead, stick the wire back in and tighten everything up again. Since then, whenever I go off road, I've made sure my tool kit gets packed first, and also that I have at least one pliers based multitool and a SAK either in my pockets or on my belt.
- Magentus
- Mechanickal
- Alan K.
-
Congrats on the NLC.

A great giveaway, but I won recently and will sit this one out.
Good luck to everyone else.
-
Big Congrats on the NLC status gdoolittle
I will sit this one out because I already have a wonderful SI (wonderful knife for a GAW) and won a Micra not long ago from Aloha 
Good luck to all the participants

-
I actually started carrying a Leatherman after the following events. My best friend, who carried a pst and is alot wiser and older them me, and I were trout fishing. He was further down steam when I heard him softly calling my name. When I got closer i couldn't help but start laughing, as I saw the line and worm on his ear. He caught a snag and when he pulled on it the line came shooting like a jet back at his face. The hook struck his ear and hooked into the ear lobe. I used his Leatherman to snip the hook past the barbs and safely remove it with the pliers. I have had one on my side ever since.
Great thread and congrats, thank you for the opportunity.
- Magentus
- Mechanickal
- Alan K.
- Leathermon
Sent from my SAMSUNG-SM-N920A using Tapatalk
-
Welcome to the club GD, I'm not sure if you should be proud or embarrassed :-\
Lovely GAW, and one I gleefully enter. I can't say I've never owned a Wenger SI, but I didn't get to own it for long and now they're a bit trickier to replace

I thought I had a Jam related story, but it was a Opinel not a Sak that saved me from a bland croissant, so perhaps not applicable here.
Looking at your purty SI reminds me of earlier days in this forum when I carried the nylon scaled version of a Recruit. It saw a great deal of
abuse, and within a year the main blade had been scratched to hell, the small blade was bent, and the scales had caught fire.I promise not to do any of that with your SI

-
Good work following simple instructions Sea Monster, you bloody muppet

- Magentus
- Mechanickal
- Alan K.
- Leathermon
- Sea Monster
-
Congrats on the NLC status G-unit :D 8)

hmmm my SAK story is about the SAK that got me into collecting SAK's :D
I had had a couple SAK's before this one....but the one that got me into actually collecting them , was gifted to me.
A co worker went to Switzerland for vacation and brought several back NIB to give as gifts...and I received one of those few. :D
It was a Spartan , and the guy who gave it to me was Duane Davis, but we called him Schwang-Ballz
He was a true character,and Great Friend......... I lost the knife fueling wind machines in the orchards one winter. :'(- Magentus
- Mechanickal
- Alan K.
- Leathermon
- Sea Monster
- cali-SAK-attack
-
Congrats on achieving the NLC... and the great GAW...
Actually saw this thread immediately after it was posted. Didn't understood what NLC meant... decided to sleep it off and do a little googling later on... Surprised google couldn't give the answer... Not even Siri... Then it hit me... confirmed by looking your profile... and there it was... :ahhh
:ahhh 
Anyway, don't have any stories to share about SAKs and MTs saving the day. But I will share some...
As far as I can remember, got introduced to SAKS by way of seeing my Mom use pocket knives to cut fruits and other foods on out of town family vacation trips be it in the car or anywhere else... unknowingly, this started my fascination with pocket tools... But I only got my own pocket knife... as a gift... a SAK... A Handyman... much much later when it was time to leave the house and earn a living...
Now that I have a kid of my own, 7 yrs old, I recently gave him a modded 58mm bladeless rambler... seeing his excitement and expression is priceless... he immediately grabbed whatever toys he have and strated to take it apart with his 58mm...
My wife is another story... afraid of pocket knives and always giving me the look whenever I hold one... But there was this one time while on the road and stuck in traffic, our son kept pestering us to help him open his packet of snacks... got tired of the pestering and gave my minichamp to the wife and asked her to open the scissors and help out... that changed her views from that day on... :yeay:
-
Magentus
-
Mechanickal
-
Alan K.
-
Leathermon
-
Sea Monster
-
cali-SAK-attack
-
jaya_man
Sent from my iPhone using Tapatalk
-
-
Congrats for the NLC!! (and thank you for the GAW)
Here is my story, not my prouder move though :
One day my friend wanted to trash her broken all-in-one inkjet printer,
my answer? "better dismantle it and save pieces before trashing!!"
This doesn't look much of a problem, but no tools at her home (
)
I grabbed my MP400 from my bag, the Micra and the Hunstman from my pockets and started the process.
What started as a clean disassembly soon finished as a big mess.
The very short Philips screwdriver of the MP400 while strong couldn't reach every screws... The micra did the job instead (and did it pretty well, until screws where -again- too deep to be reached)
The plastic cover could not be fully unscrewed so it was first quickly cut with the saw of the Hunstman (taking care of overheating, as plastic isn't quite like wood); and then ripped off using the pliers... >:DWe both finished to unscrew motors, steel rods, PCBs and stuff with the MP and Micra in a few minutes.
Success, the useful parts were salvaged and the remnant was trashed
Finally, I only wish I had a real screwdriver, that would have helped for a clean disassembly... But the job was done, That's what counts right?
Would a center drive have solved this? maybe
-
Magentus
-
Mechanickal
-
Alan K.
-
Leathermon
-
Sea Monster
-
cali-SAK-attack
-
jaya_man
-
m47mu74nt
-
-
Really enjoying all of these stories! Thanks for all of the entries so far!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
