And so it begins.... (My adventures into Alox!)
-
I had done a shaded bronze to light-blue pattern once to show what was easy to obtain without professional tools :

Green and pink need higher voltage and surface etchingAnd blue looks much better than bronze :

Many reasons to make blue anodized SAKs, right ?
-
Hey Robert.
You only have these scales in blue at the moment?
I'm not Robert, but I believe the light blue is the easiest color to anodize titanium consistently, which is probably why it shows up more often. It also happens to be the perfect color for me, which works out nicely.
Blue and purple are the easiest. The only other distinct colors are bronze and green. I havent tried etching yet to get a good green.
Runs off to searh old posts for a picture of a purple tilox.
Noone has asked for purple yet so Ive only made blue. I will do a purple set today for a comparison. I need a pic of both blue and purple anyhow.
-
[quote author=HarleyXJGuy link=topic=34772.msg1382314#msg1382314 date=1479735022]
Hey Robert.You only have these scales in blue at the moment?
I'm not Robert, but I believe the light blue is the easiest color to anodize titanium consistently, which is probably why it shows up more often. It also happens to be the perfect color for me, which works out nicely.
Blue and purple are the easiest. The only other distinct colors are bronze and green. I havent tried etching yet to get a good green.
Runs off to searh old posts for a picture of a purple tilox.
Noone has asked for purple yet so Ive only made blue. I will do a purple set today for a comparison. I need a pic of both blue and purple anyhow.
[/quote]
-
[quote author=s1xty7 link=topic=34772.msg1382353#msg1382353 date=1479740704]
[quote author=HarleyXJGuy link=topic=34772.msg1382314#msg1382314 date=1479735022]
Hey Robert.You only have these scales in blue at the moment?
I'm not Robert, but I believe the light blue is the easiest color to anodize titanium consistently, which is probably why it shows up more often. It also happens to be the perfect color for me, which works out nicely.
Blue and purple are the easiest. The only other distinct colors are bronze and green. I havent tried etching yet to get a good green.
Runs off to searh old posts for a picture of a purple tilox.
Noone has asked for purple yet so Ive only made blue. I will do a purple set today for a comparison. I need a pic of both blue and purple anyhow.
[/quote]
[/quote]:o +1


-
I am really enjoying the heavily tumbled TI with the copper cross. A quick question or two - can you use the magnifying glass from a donor knife with the older type grey plastic and smaller 8x lenses or do you need the new, larger lense? Also - can you mill the scale to accept the toothpick?
-
@Lardlad said:
I am really enjoying the heavily tumbled TI with the copper cross. A quick question or two - can you use the magnifying glass from a donor knife with the older type grey plastic and smaller 8x lenses or do you need the new, larger lense? Also - can you mill the scale to accept the toothpick?For the Ti scales Im trying a new option for T&T. If I fit the existing thick tools that the plastic scales use Id have to have much thicker Ti. So.. I got to thinking. Might as well just make Ti T&T and then have them attached inside the scales and fold out to use.
The old mag glass, glass was much smaller than the modern one so the frame I made wouldnt fit. I have wondering if there is a place to get different magnification lenses ordered a specific diameter though as an upgrade. I would love one strong enough to start a fire.
-
I am really enjoying the heavily tumbled TI with the copper cross. A quick question or two - can you use the magnifying glass from a donor knife with the older type grey plastic and smaller 8x lenses or do you need the new, larger lense? Also - can you mill the scale to accept the toothpick?
For the Ti scales Im trying a new option for T&T. If I fit the existing thick tools that the plastic scales use Id have to have much thicker Ti. So.. I got to thinking. Might as well just make Ti T&T and then have them attached inside the scales and fold out to use.
The old mag glass, glass was much smaller than the modern one so the frame I made wouldnt fit. I have wondering if there is a place to get different magnification lenses ordered a specific diameter though as an upgrade. I would love one strong enough to start a fire.
This all sounds most excellent Syph

Sent from my SM-G920R4 using Tapatalk
-
I am really enjoying the heavily tumbled TI with the copper cross. A quick question or two - can you use the magnifying glass from a donor knife with the older type grey plastic and smaller 8x lenses or do you need the new, larger lense? Also - can you mill the scale to accept the toothpick?
For the Ti scales Im trying a new option for T&T. If I fit the existing thick tools that the plastic scales use Id have to have much thicker Ti. So.. I got to thinking. Might as well just make Ti T&T and then have them attached inside the scales and fold out to use.
The old mag glass, glass was much smaller than the modern one so the frame I made wouldnt fit. I have wondering if there is a place to get different magnification lenses ordered a specific diameter though as an upgrade. I would love one strong enough to start a fire.
This all sounds most excellent Syph

Sent from my SM-G920R4 using Tapatalk
Yes, yes it does

-
@Syph007 said:
Here's something a bit different for me. I did one with that light module and went through the process to make those goofy liners it needs from brass.




I really like the copper cross on this combined with the diamond texture scales. First time Ive done this as well.
How it the copper cross done, is it an inlay that is then polished after tumbling? I thought the 3D cross on those scales was part of the titanium scale itself, so not sure how the copper gets onto it?
-
Here's something a bit different for me. I did one with that light module and went through the process to make those goofy liners it needs from brass.





I really like the copper cross on this combined with the diamond texture scales. First time Ive done this as well.
How it the copper cross done, is it an inlay that is then polished after tumbling? I thought the 3D cross on those scales was part of the titanium scale itself, so not sure how the copper gets onto it?
It's a solid piece of copper that goes through the scale. I do that before I ma check one the texture.
-
Here's something a bit different for me. I did one with that light module and went through the process to make those goofy liners it needs from brass.





I really like the copper cross on this combined with the diamond texture scales. First time Ive done this as well.
How it the copper cross done, is it an inlay that is then polished after tumbling? I thought the 3D cross on those scales was part of the titanium scale itself, so not sure how the copper gets onto it?
It's a solid piece of copper that goes through the scale. I do that before I ma check one the texture.
I see, cool, so the copper doesn't get tumbled?
-
@Syph007 said:
I have wondering if there is a place to get different magnification lenses ordered a specific diameter though as an upgrade. I would love one strong enough to start a fire.I don't think a stronger lens would help with that. Ultimately they all focus sunlight to a point. The problem is lack of area, it's not big enough to gather enough light.
-
Here's something a bit different for me. I did one with that light module and went through the process to make those goofy liners it needs from brass.





I really like the copper cross on this combined with the diamond texture scales. First time Ive done this as well.
How it the copper cross done, is it an inlay that is then polished after tumbling? I thought the 3D cross on those scales was part of the titanium scale itself, so not sure how the copper gets onto it?
It's a solid piece of copper that goes through the scale. I do that before I ma check one the texture.
I see, cool, so the copper doesn't get tumbled?
I understand it as that it does. First he machines a slot for for the brass slot and inserts it. Next he machines the chequering and after that he tumbles it.
-
[quote author=Syph007 link=topic=34772.msg1381976#msg1381976 date=1479674990]
Here's something a bit different for me. I did one with that light module and went through the process to make those goofy liners it needs from brass.




I really like the copper cross on this combined with the diamond texture scales. First time Ive done this as well.
How it the copper cross done, is it an inlay that is then polished after tumbling? I thought the 3D cross on those scales was part of the titanium scale itself, so not sure how the copper gets onto it?
It's a solid piece of copper that goes through the scale. I do that before I ma check one the texture.
I see, cool, so the copper doesn't get tumbled?
I understand it as that it does. First he machines a slot for for the brass slot and inserts it. Next he machines the chequering and after that he tumbles it.
[/quote]Correct. I also have a polishing mask so I can polish the cross after tumble if needed.
-
[quote author=Oxford_Guy link=topic=34772.msg1383417#msg1383417 date=1479890499]
[quote author=Syph007 link=topic=34772.msg1381976#msg1381976 date=1479674990]
Here's something a bit different for me. I did one with that light module and went through the process to make those goofy liners it needs from brass.




I really like the copper cross on this combined with the diamond texture scales. First time Ive done this as well.
How it the copper cross done, is it an inlay that is then polished after tumbling? I thought the 3D cross on those scales was part of the titanium scale itself, so not sure how the copper gets onto it?
It's a solid piece of copper that goes through the scale. I do that before I ma check one the texture.
I see, cool, so the copper doesn't get tumbled?
I understand it as that it does. First he machines a slot for for the brass slot and inserts it. Next he machines the chequering and after that he tumbles it.
[/quote]Correct. I also have a polishing mask so I can polish the cross after tumble if needed.
[/quote]Thanks! Liking those scales alot!
-
[quote author=HarleyXJGuy link=topic=34772.msg1382314#msg1382314 date=1479735022]
Hey Robert.You only have these scales in blue at the moment?
I'm not Robert, but I believe the light blue is the easiest color to anodize titanium consistently, which is probably why it shows up more often. It also happens to be the perfect color for me, which works out nicely.
Blue and purple are the easiest. The only other distinct colors are bronze and green. I havent tried etching yet to get a good green.
Runs off to searh old posts for a picture of a purple tilox.
Noone has asked for purple yet so Ive only made blue. I will do a purple set today for a comparison. I need a pic of both blue and purple anyhow.
[/quote]Purple?
-
Brass today.... I LOVE brass. :D





-
Nice job

JR -
The brass looks amazing. It would be interesting to see the patina that develops.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login