Signal owner's club
-
-
S30v
Is the S30V a better choice than the 154CM?
Cheers,
Pete
Leatherman website say 6 times better 440 , three time beter then 154 cm .. I dont know about that

-
@Obi1shinobee said:
Leatherman website say 6 times better 440 , three time beter then 154 cm .. I dont know about that
Interesting, I only have 154CM blades hence the question. The differences will also impact the edge retention I would imagine.
Cheers,
Pete
-
I got in and out of this club within a week
I bought a used Signal, just to check it out. I liked its weight, frame, and somewhat minimalist approach. What I did not like were the removable plastic parts. Clumsy and not intuitive to use. It was changed hand late last week. So I am Signal-less again :P -
@chrono said:
I got in and out of this club within a week
I bought a used Signal, just to check it out. I liked its weight, frame, and somewhat minimalist approach. What I did not like were the removable plastic parts. Clumsy and not intuitive to use. It was changed hand late last week. So I am Signal-less again :PThe little plastic bits are the only things on the Signal I have not used. The file did a nail a while ago, but that is about it. I would love to have a plastic bit container that fits in where the ferro rod is. Maybe carry an additional two bits. And since it is removable a plastic mould can possibly be made... I am going to check on this with the ferro rod out.
Pete
PS
Well I had a quick look at the whistle. One bit will most definitely fit, but the whistle will no longer work. One will also have to make a sort of retaining mechanism to keep the extra bit inside. I don't think that two bits will fit though. There may be space for two standard hex bits. I will have a play over the next few days and see what I can come up with. -
I think that with the bit is a better use than the whistle anyways

-
@Obi1shinobee said:
That Ferro Rod slot
I think so too. If I take some off the sides it might fit in flat and have enough plastic for a type of retaining clip(s). One might even be able to keep the whistle functioning then, I will have a look during the week.
Pete
-
That Ferro Rod slot

I think so too. If I take some off the sides it might fit in flat and have enough plastic for a type of retaining clip(s). One might even be able to keep the whistle functioning then, I will have a look during the week.
Pete
Long bit drive on pocket clip would be awesome..
-
@Obi1shinobee said:
Long bit drive on pocket clip would be awesome..Indeed, I tried putting one UNDER the clip, it sort of fits but over time will bend the clip. I think adding to the outside might make for some interesting moments getting the tool out of one's pocket. Not sure what to use to keep it on the clip?
-
It's way too expensive for an EDC for me, I lose several pocketknives per year, so I carry cheapie lock blades, :-) But the Signal rides in my BOB, with a lanyard and pocket sheath. Then if I try to walk off and leave my Signal someplace, the sheath flops against my leg and reminds me.
-
I also carry a freznel lense and a lighter and a small coil of waxed 1/2" cotton rope, with an inch of copper tubing on one end. It makes a superb tool for lighting fires. The tube is the flame-adjuster. The charred rope will take a spark when it's soaking wet
-
I see them selling on Ebay for about $70 at the end of the auctions.
-
Hi guys! I have some questions, and i hope this is the right place to ask. I have a Surge, and i absolutely love it...but, you know...summer is coming, and the surge is too big and bulky and heavy to been carried in a pair of shorts...so, since that was my b-day few days ago, i'm thinking at the Signal like a self-present for me (hell, i deserve it!)...my question is this: if i buy the signal, could i swap the bottle opener and the saw of the signal with the big flathead and the t-shank of the Surge? With this mod the Signal could be the perfect multitool...hope you can help me...😁
Inviato dal mio S7 utilizzando Tapatalk
-
@Bancomat85 said:
Hi guys! I have some questions, and i hope this is the right place to ask. I have a Surge, and i absolutely love it...but, you know...summer is coming, and the surge is too big and bulky and heavy to been carried in a pair of shorts...so, since that was my b-day few days ago, i'm thinking at the Signal like a self-present for me (hell, i deserve it!)...my question is this: if i buy the signal, could i swap the bottle opener and the saw of the signal with the big flathead and the t-shank of the Surge? With this mod the Signal could be the perfect multitool...hope you can help me...😁Inviato dal mio S7 utilizzando Tapatalk
Short answer is no sorry. Either would take a fair bit of work to get them in. Both great tools but the parts aren't really interchangeable.
-
Mmmm... i understand.... i saw a signal on youtube with the scissors (from a wingman) so i hoped to do something like that with the t-shank... now i am a sad man.... ☹
Inviato dal mio SM-G930F utilizzando Tapatalk
-
It's still a great multitool...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



