Leatherman Kick Mods
-
@george1 said:
Hi Kampfer,
Thanks for the images, your Kick looks great.
Can I ask what the saw is from?
GeorgeThanks.
I don't own it anymore, a member here got scammed over a purchase, I figured he needed it more than I do so this KickASS multitool was gifted to him. Before sending it out he requested me to replace the serrated blade with a REBAR saw to suit his needs.You can read all about it in here: /topic/59023
-
Welcome to
George 
The Kick is a very moddable LM and a Blast saw will work in it as well
Most tools from a Kick, Fuse, Blast, Rebar and the inside tools from the new Wave are interchangeable
Hopefully that bit of info will help with your modding and also we have a member here, loki-mobile who has wrenches made to work on LM and also he sells individual parts as well
Here is a link to his thread and you can ask him what he has available after you get a list of stuff you want that you don't have 
/topic/61708
-
Hi Poncho65,
Thanks for the tip about the tools that loki-mobile sells. They should make the job very easy - l was worried l would mash up the heads using vice grips.Any idea if l can make the lager PST ii scissors fit the Kick?
George
-
Poncho65,
Can you tell me how to get in touch with loki-mobile?
Does this forum have a private message option or do l need his email?
Cheers
George -
You need 5 posts to be able to send PMs - you should be able to now.

-
@george1 said:
Hi Poncho65,
Thanks for the tip about the tools that loki-mobile sells. They should make the job very easy - l was worried l would mash up the heads using vice grips.Any idea if l can make the lager PST ii scissors fit the Kick?
George
Pivot of the large scissors may be the same but I don't know if they will go or not
I have no problem with the smaller scissors though
Also you have over 5 posts now and you can PM him like hiraethus said 
Tell him what you are wanting to do and he will see if he has the parts you need

-
Nice work! Looks great!
Sent from my iPhone using Tapatalk
-
Hi Poncho65,
Thanks for the tip about the tools that loki-mobile sells. They should make the job very easy - l was worried l would mash up the heads using vice grips.George
I did the mod with two Kick pocket clips, worked perfectly fine.
I used the 2 Kick clips for years as wrenches
but the loki wrenches do so much better of a job IMO
Plus it is getting harder and harder to find Kick clips these days :-\ -
Hi Poncho65,
Thanks for the tip about the tools that loki-mobile sells. They should make the job very easy - l was worried l would mash up the heads using vice grips.George
I did the mod with two Kick pocket clips, worked perfectly fine.
I used the 2 Kick clips for years as wrenches
but the loki wrenches do so much better of a job IMO
Plus it is getting harder and harder to find Kick clips these days :-\That is right, I ordered Loki's 11th set of wrenches. They are the MT of 2015 in my book.
-
Hi Poncho65,
Thanks for the tip about the tools that loki-mobile sells. They should make the job very easy - l was worried l would mash up the heads using vice grips.George
I did the mod with two Kick pocket clips, worked perfectly fine.
I used the 2 Kick clips for years as wrenches
but the loki wrenches do so much better of a job IMO
Plus it is getting harder and harder to find Kick clips these days :-\That is right, I ordered Loki's 11th set of wrenches. They are the MT of 2015 in my book.
Most definitely
I love the ones I have

-
LOVE THEM!
-
I've now got some of Loki's spanners and a pair of Blast scissors, saw and file on its way
Cant wait and l'm already planning the next LM to modify.
George
-
-
Does anyone know if the Kick and Fuse have the same width in the handles?
i.e. did they fit the scissors (and incorporate the tool locks) into the Fuse?
Cheers
GK -
@george1 said:
Does anyone know if the Kick and Fuse have the same width in the handles?
i.e. did they fit the scissors (and incorporate the tool locks) into the Fuse?
Cheers
GKI will have to check but I think that the Fuse is wider
All the tools should be interchangeable though
You just won't fit as much in the Kick as you can the Fuse I think 
-
@Poncho65 said:
I will have to check but I think that the Fuse is wider
All the tools should be interchangeable though
You just won't fit as much in the Kick as you can the Fuse I think 
Thanks Poncho65, that what l thought as well. The reason l went with the Kick is because l want a lightweight tool that has a pocket clip - but l would like to have a bit more room in order to have sufficient tools.
I think l have seen a few mods (on other leatherman tools) that used the hollow Kick pivot in order to use the pocket clip.
Can someone explain how this works? I assumed that the Kick pivot would be too short to use on wider tools.
-
Some info for you.
/topic/51933 -
I will have to check but I think that the Fuse is wider
All the tools should be interchangeable though
You just won't fit as much in the Kick as you can the Fuse I think 
Thanks Poncho65, that what l thought as well. The reason l went with the Kick is because l want a lightweight tool that has a pocket clip - but l would like to have a bit more room in order to have sufficient tools.
I think l have seen a few mods (on other leatherman tools) that used the hollow Kick pivot in order to use the pocket clip.
Can someone explain how this works? I assumed that the Kick pivot would be too short to use on wider tools.
Actually because of the Zytel the Kick is pretty close to the same width as the Rebar
I used a Kick pivot in my Rebar and have a clip on it right now and here is a pic 
<a href="https://flic.kr/p/PQkrGE" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/1/669/31395753490_bb89b429d1_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161220_120425 by Poncho 65, on Flickr
-
I'm still waiting for my tools/parts from Loki to arrive so in the meantime l have decided on the plan for this Kick. I will replace the knife with the Blast's saw and sneak in the Blast's file on the other side. I will carry this along with a Yeoman and a mini Griptillian so scissors and a knife will be covered. There will be some room left over so l might squeeze in an awl as well, but that's stage 2.
I also just purchased a PST ii (not recieved as yet) and l was wondering if l can replace the serrated blade with the one left over from the Kick?
Also how does the width of the PST ii compare with the Kick? Would it be possible to use the pocket clip pivot pin from (another) Kick to add a pocket clip to the PST ii?
Cheers
George
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
