Leatherman needed
-
Hi everyone I am a bit of a tool fanatic and have a few multitools, have the skeletool and a victorinox climber and a sog and gerber etc but I love the leatherman designs and they are for more heavy work , I am a mechanic by trade and want a tool for work and home
I don't think there is one with everything I want but bet everyone says that haha
Want a bit holder for sure already have the leatherman bits, I want a decent blade and pliyers I really wanted the changeable wire cutters as wil get used at work but don't think any I like have them
I don't want a huge tool like the surge preferably something wave sized or charge tti I love the look of these 2 but do any have changeable wire cutters
Thanks dean
Sent from my SM-G930F using Tapatalk
-
Welcome aboard Dean

The Rebar has the replaceable cutters you are looking for, and there is a Leatherman bit adaptor available seperately which sits on the Phillips and lets you use the bits

-
Victorinox Spirit is always the answer, and just because they are pretty doesn't mean they can't take a beating :D
Nah... what you want is a Re-Charge / Re-Wave, a Charge/Wave with a Rebar head. There are several options on how to get one.
Easiest but expensive, would be get one from TTCAlternatively, you can do it yourself, it is really not that hard, me (IT guy) did manage. Now Rebar heads are not that easy to come by, my best bet would be to PM loki-mobile.
-
Hi and thanks guys, I am from UK I forgot to add and I have also been hanging around here for ages keep looking at all the awesome tools, I seriously have a problem always buying tools at work and home and they just sit in drawer half the time but want a multitool to use, the last ones look to nice to use but that's what they are for 😂, sorry to be picky but don't like the look of the square rebar I love the wave and the charge tti so think going to have to pass on changeable heads, unless someone knows of bringing them out with them on ? So going to have to look at reviews on the charge tti as just found that and it's another good looking tool packed with cool tools, much more expensive though, the wave is excellent and already watched loads on wave
What's your opinions on wave vs charge tti ?
-
@Deano3 said:
Hi and thanks guys, I am from UK I forgot to add and I have also been hanging around here for ages keep looking at all the awesome tools, I seriously have a problem always buying tools at work and home and they just sit in drawer half the time but want a multitool to use, the last ones look to nice to use but that's what they are for 😂, sorry to be picky but don't like the look of the square rebar I love the wave and the charge tti so think going to have to pass on changeable heads, unless someone knows of bringing them out with them on ? So going to have to look at reviews on the charge tti as just found that and it's another good looking tool packed with cool tools, much more expensive though, the wave is excellent and already watched loads on waveWhat's your opinions on wave vs charge tti ?
The change between TTI, ALX etc is namely to be found in the handle materials.
TTI: titanium
AL & ALX: alox
Between AL & ALX is a small tool configuration difference. -
Thanks for that information , so it's the wave vs tti , he'll of a price difference but I do like the belt cutter, is there no wave with s30v steel I thought there was, might try the wave 😊
Also anyone know what models will he changing next year etc
Sent from my SM-G930F using Tapatalk
-
The wave is basicaly a no-nonsense version of a TTI, without belt cutter.
Now, in a pinch, wouldn't you cut your/someone elses seatbelt with the regular serrated blade?
The point ain't THAT sharp.
Above all, under stress chances are you won't be able to aim the seatbelt cutter over the seatbelt.
Better to survive with a cut then to die.My advice: try looking for a decent second hand wave. I found some for €35 over here.
If you'd like to level it up after some time, go for a TTI.
The Wave is a more then decent tool for the money. And there is a reason it's one of Leatherman's most sold tools...
-
Is there any sites in uk what sell second hand multitools etc
Sent from my SM-G930F using Tapatalk
-
I believe they occasionally pop up on Gumtree
-
Thanks I will have a look any other sites in uk ?
Sent from my SM-G930F using Tapatalk
-
If I end up buying new there is option for engraving and it will be a present off my kids for Xmas so might engrave or does it fade and end up looking messy ?
Sent from my SM-G930F using Tapatalk
-
@Deano3 said:
If I end up buying new there is option for engraving and it will be a present off my kids for Xmas so might engrave or does it fade and end up looking messy ?Sent from my SM-G930F using Tapatalk
Engraving lasts as long as your tool ;)
It makes for a wonderfull present, but you'll have to hurry...
-
Even if it is the lazer engraving so not actually cutting into knife but on top of it ?
Sent from my SM-G930F using Tapatalk
-
@Deano3 said:
Even if it is the lazer engraving so not actually cutting into knife but on top of it ?Sent from my SM-G930F using Tapatalk
It etches a darkened text/logo on the tool.
I've seen some abused tools that still had their laser etch perfectly readable.
It's one of the nicest ways of etching in my oppinion.
Rest asured, it'll last. -
Keep in mind though, if you order a laser etched tool online, you position the etching correctly.
Because some sites not only let you choose the engraving, but also the location of the etching (blade or handle)
Sometimes you can even virtualy position your etching on the product to choose where it'll be etched.
In this case you have to make sure you won't etch over any other brand/type markings on the tool. -
OK thanks and we're you think is best tool or blade, on blade least it's hidden until you want to see it sure both will be excellent thanks a lot for help and I will be hanging around a lot more and sharing my experiences 😉
Sent from my SM-G930F using Tapatalk
-
Wave is a good tool to go. I have been using both Wave and TTi at work. TTi is better if you have small hands, because Wave opens wider. Other than that Wave is a fantastic beater and best MT for the money.
-
@Deano3 said:
OK thanks and we're you think is best tool or blade, on blade least it's hidden until you want to see it sure both will be excellent thanks a lot for help and I will be hanging around a lot more and sharing my experiences 😉Sent from my SM-G930F using Tapatalk
Personal prefference.
However, if you ever damage the blade, you can have it replaced, but you'll lose the etching.
The handle takes a lot less beating and should last you forever...-> I <- Would pick the handles.
That way you can enjoy it, and the memories behind it, without having a sharp edge out too!
-
Brilliant thanks for all the input everyone and warm welcome
Sent from my SM-G930F using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login