Let's see your sharpening stones/gear!
-
I know it takes me forever to get around to things but I finally tried my big Fallkniven bench stone and WOW!!!
My Trail Master is the sharpest it's ever been which in the past, has been no easy feat. Originally a convex edge and along with it's extremely thick grind, it been a chore to get even close to a really fine edge. I spent about 15 mins freehanding it and bang! Now the old gal is slicing paper pretty well....if I spend a little more time on it, and actually lay the stone on a table (instead of palming it), it might end up close to properly sharp.
A (crummy) pic....

I was kicking around the idea of buying a Razor Edge guide to use on this very knife but will wait and see now.
I'll add other stones later but if you have a stone or system you use on your knives (esp on your bigger Camping/Bushcraft/Hunting knives), post a pic and tell us how you like it.
Indeed the big CSTM is not something one lets get past the point of nearly dull, because if you do you will understand the meaning of the words Patience is a virtue.
If I drug it all out and photographed it my wife would KEEL me,
But I use the Worksharp knife and tool sharpener ken onion for hog work (rare)
DMT BLUE AND RED variants for sharpening a dull blade
Spyderco TSM and various ceramic rods for general upkeep and honing.
Strops for polish honing with mothers aluminum and mag polish, and bare leather too.
Some steels respond to river rocks, some don't. They all respond to diamonds.
Diamonds work best I think. On the CSTM, I bought it used and the former owner let it go too long.
It's been a work in progress for about 5 years.On the DMT, I like that red/blue Duofold pretty well. I used to use one in X-Coarse to sharpen axes/lawnmower blades....it finally wore a smooth spot in the middle but I probably push too hard anyway because I can start wearing one in about 2 years of use. You're suppose to let the diamonds do the work but I still catch myself acting like it's an old carborundum stone.

-
@SAK Guy said:
Heck, I don't know...I think it says USP on the bottle. I like it because it stays in the joints really well and does not migrate all over the place.....I have some Rem-Oil that is so dang light that one drop coats the knife, my hands, me and whatever I'm sitting on....shoot, it's so thin, that people I talk to on the phone report hanging up feeling oily! :o
;)

-
I know it takes me forever to get around to things but I finally tried my big Fallkniven bench stone and WOW!!!
My Trail Master is the sharpest it's ever been which in the past, has been no easy feat. Originally a convex edge and along with it's extremely thick grind, it been a chore to get even close to a really fine edge. I spent about 15 mins freehanding it and bang! Now the old gal is slicing paper pretty well....if I spend a little more time on it, and actually lay the stone on a table (instead of palming it), it might end up close to properly sharp.
A (crummy) pic....

I was kicking around the idea of buying a Razor Edge guide to use on this very knife but will wait and see now.
I'll add other stones later but if you have a stone or system you use on your knives (esp on your bigger Camping/Bushcraft/Hunting knives), post a pic and tell us how you like it.
Indeed the big CSTM is not something one lets get past the point of nearly dull, because if you do you will understand the meaning of the words Patience is a virtue.
If I drug it all out and photographed it my wife would KEEL me,
But I use the Worksharp knife and tool sharpener ken onion for hog work (rare)
DMT BLUE AND RED variants for sharpening a dull blade
Spyderco TSM and various ceramic rods for general upkeep and honing.
Strops for polish honing with mothers aluminum and mag polish, and bare leather too.
Some steels respond to river rocks, some don't. They all respond to diamonds.
Diamonds work best I think. On the CSTM, I bought it used and the former owner let it go too long.
It's been a work in progress for about 5 years.On the DMT, I like that red/blue Duofold pretty well. I used to use one in X-Coarse to sharpen axes/lawnmower blades....it finally wore a smooth spot in the middle but I probably push too hard anyway because I can start wearing one in about 2 years of use. You're suppose to let the diamonds do the work but I still catch myself acting like it's an old carborundum stone.

It is not hard to push to hard sharpening with a diamond stone
Hard habit to break if you learnt on regular stones ;) :D -
I know it takes me forever to get around to things but I finally tried my big Fallkniven bench stone and WOW!!!
My Trail Master is the sharpest it's ever been which in the past, has been no easy feat. Originally a convex edge and along with it's extremely thick grind, it been a chore to get even close to a really fine edge. I spent about 15 mins freehanding it and bang! Now the old gal is slicing paper pretty well....if I spend a little more time on it, and actually lay the stone on a table (instead of palming it), it might end up close to properly sharp.
A (crummy) pic....

I was kicking around the idea of buying a Razor Edge guide to use on this very knife but will wait and see now.
I'll add other stones later but if you have a stone or system you use on your knives (esp on your bigger Camping/Bushcraft/Hunting knives), post a pic and tell us how you like it.
Indeed the big CSTM is not something one lets get past the point of nearly dull, because if you do you will understand the meaning of the words Patience is a virtue.
If I drug it all out and photographed it my wife would KEEL me,
But I use the Worksharp knife and tool sharpener ken onion for hog work (rare)
DMT BLUE AND RED variants for sharpening a dull blade
Spyderco TSM and various ceramic rods for general upkeep and honing.
Strops for polish honing with mothers aluminum and mag polish, and bare leather too.
Some steels respond to river rocks, some don't. They all respond to diamonds.
Diamonds work best I think. On the CSTM, I bought it used and the former owner let it go too long.
It's been a work in progress for about 5 years.On the DMT, I like that red/blue Duofold pretty well. I used to use one in X-Coarse to sharpen axes/lawnmower blades....it finally wore a smooth spot in the middle but I probably push too hard anyway because I can start wearing one in about 2 years of use. You're suppose to let the diamonds do the work but I still catch myself acting like it's an old carborundum stone.

It is not hard to push to hard sharpening with a diamond stone
Hard habit to break if you learnt on regular stones ;) :D

-
Can't decide.... will probably go with a can of Norton oil. Would try water but that Norton stone is already precharged with oil so don't know if that would work. ???
Both work fine for me. Trick is to use a drop of dish soap with water. For larger jobs I find water AND oil work great with the dish soap. Oil alone can get a little too thick for lapping large surfaces. Considering Norton oil is food safe, I would bet it's food grade mineral oil. My can ran out last month, but I never could see any difference between it and mineral oil from the drugstore.
To lap other stones or large areas of steel, I rub the corner of a coarse silicon carbide stone onto the coarse India. The AlOx of the india stone isn't as hard as SiC, but it's much tougher than SiC and much harder than glass or granite, so it makes a good, durable, aggressive lapping surface. The SiC stone easily fractures/dislodges particles onto the tougher Norton india. Freshen up, frequently, with more SiC, and it cuts like a demon.
Some steels respond to river rocks, some don't. They all respond to diamonds
. A little SiC stone fixes that, too. But your average river rock is going to wear a lot faster than Norton india stone when used that way. SiC and india stone makes a pretty decent alternative to diamond lapping plates, without some of the disadvantages of diamond. Main pro.... you can't permanently mess up or wear out an india stone.. well you could wear one out, but you would have gotten more than your money's worth, lol.
My Norton Combo india is one of my most useful stones, even if a finished knife edge rarely touches it. It does larger profiling/lapping jobs on hardened steel and lapping shaping of my other stones. not to say the fine side doesn't give a great edge.
-
Can't decide.... will probably go with a can of Norton oil. Would try water but that Norton stone is already precharged with oil so don't know if that would work. ???
Both work fine for me. Trick is to use a drop of dish soap with water. For larger jobs I find water AND oil work great with the dish soap. Oil alone can get a little too thick for lapping large surfaces. Considering Norton oil is food safe, I would bet it's food grade mineral oil. My can ran out last month, but I never could see any difference between it and mineral oil from the drugstore.
To lap other stones or large areas of steel, I rub the corner of a coarse silicon carbide stone onto the coarse India. The AlOx of the india stone isn't as hard as SiC, but it's much tougher than SiC and much harder than glass or granite, so it makes a good, durable, aggressive lapping surface. The SiC stone easily fractures/dislodges particles onto the tougher Norton india. Freshen up, frequently, with more SiC, and it cuts like a demon.
Some steels respond to river rocks, some don't. They all respond to diamonds
. A little SiC stone fixes that, too. But your average river rock is going to wear a lot faster than Norton india stone when used that way. SiC and india stone makes a pretty decent alternative to diamond lapping plates, without some of the disadvantages of diamond. Main pro.... you can't permanently mess up or wear out an india stone.. well you could wear one out, but you would have gotten more than your money's worth, lol.
My Norton Combo india is one of my most useful stones, even if a finished knife edge rarely touches it. It does larger profiling/lapping jobs on hardened steel and lapping shaping of my other stones. not to say the fine side doesn't give a great edge.
Wow!!! Thanks for the info bud!!!

You've clearly passed steel over stone a few times!!!!

-
I like my stones. :)
I rounded up some for a pic. My Norton combo india is far left. Fine side on mine is orange, and it didn't come in as fancy a box as yours. If I had to start all over from scratch, that would be one of the first tools I replace. Then I have a combo silicon carbide stone next to it. Most of the rest are various shades of Arkansas. I use a waterstone in the kitchen, but I forgot to include it.

-
Awesome collection!

-
-
Thx guys. I feel a less odd for hoarding pieces of rock like gold bars. It made my day to be able to share with other people who get it. I guess I can divulge; I made this pic my wallpaper. Admitting I have a problem is the first step, right? Thx, again.
-
@kl27x said:
I like my stones. :)I rounded up some for a pic. My Norton combo india is far left. Fine side on mine is orange, and it didn't come in as fancy a box as yours. If I had to start all over from scratch, that would be one of the first tools I replace. Then I have a combo silicon carbide stone next to it. Most of the rest are various shades of Arkansas. I use a waterstone in the kitchen, but I forgot to include it.

You've got a nice selection. Thanks for sharing.
-
@kl27x said:
Thx guys. I feel a less odd for hoarding pieces of rock like gold bars. It made my day to be able to share with other people who get it. I guess I can divulge; I made this pic my wallpaper. Admitting I have a problem is the first step, right? Thx, again.No judgement from me :D I have a few and would have more but tracking down older benchstones is a job sometimes :D I have memories of my dad getting an old whetrock out and get one of his carbon steel knives shaving sharp
He would show me how sharp it was by shaving a small bit of hair off his arm and I be like :o :D He still has those same stones 30+ years later and although he has a Lansky and other sharpening things now I still have memories of those older stones he has
In fact one of them he has was given to him by his father-in-law my grandfather 
-
I used a few diamond DMT and Eze-Lap stones for serveal years, and they were good. But then I was up in the attic going through some old boxes of stuff and found my old boy scout stuff. I started to use my boy scout "carborundum" stone and I was amazed at how fast a good newsprint slicing edge got put on. I started to use it almost exclusively for my knife sharpening, and remembered when it was our only way to sharpen, and our knives were sharp. I love the old school stone, and use it now all the time. I do keep a cut down Eze-Lap model L in my wallet for when I'm out someplace and need to touch up an edge.

The model L in wallet with a few odds and ends.

I've been known to use the bottom of a coffee mug in a pinch. Ceramic works good!
-

I got a worksharp guided field sharpener from my wife for Christmas. I used it to sharpen several knives over the past couple nights. I've normally used stones or a diamond file type sharpener. However I have been very pleased with the worksharp. I found most of my blades did well with just the ceramic rod and the strop. -
@cbl51 said:
I used a few diamond DMT and Eze-Lap stones for serveal years, and they were good. But then I was up in the attic going through some old boxes of stuff and found my old boy scout stuff. I started to use my boy scout "carborundum" stone and I was amazed at how fast a good newsprint slicing edge got put on. I started to use it almost exclusively for my knife sharpening, and remembered when it was our only way to sharpen, and our knives were sharp. I love the old school stone, and use it now all the time. I do keep a cut down Eze-Lap model L in my wallet for when I'm out someplace and need to touch up an edge.

The model L in wallet with a few odds and ends.

I've been known to use the bottom of a coffee mug in a pinch. Ceramic works good!
I love that leather slip and stone you have from the boyscouts

-
@4everYoung said:

I got a worksharp guided field sharpener from my wife for Christmas. I used it to sharpen several knives over the past couple nights. I've normally used stones or a diamond file type sharpener. However I have been very pleased with the worksharp. I found most of my blades did well with just the ceramic rod and the strop.Nice system 4ever

-
re:cbl51:
Yeah, even my "fine" 240 grit silicon carbide stone will leave a really good edge, esp if I leave the mud on the stone and use a light touch. It works a lot better with a good dose of oil, though, and it does make a bit of a mess, which makes it a bit less handy for pocket use.One of the reasons I like translucent Arkansas for a pocket stone is it both holds its shape very well, and it is easy to clean. If you use it dry, it clogs fast, but the grit sticks to the stone, not your pocket. Even a light smoothing/straightening will often make a big improvement. And you can easily wipe the metal off, later. A little bit of paper towel dampened with your tongue will clean it spotless :)
Half a dozen or one, six of the other, though. With a carborundum stone, I'll sometimes lay off the edge and grind until the stone and blade lap together, and the slurry/stone just kiss the edge. With the translucent ark, I'll lay the edge right on the stone for a touchup. Carborundum is definitely more versatile, though. You can only get by so far with just a fine ark stone. I do love carborundum for the speed and surface finish.
As an aside, I took the missus to the Home Depot for her annual day-after-xmas Christmas light shopping. While there, I decided to pick up another silicon carbide bench stone. I ask an employee, and he immediately responds that they don't carry bench stones, anymore. The heck, I say. He must be mistaken. Nope.... all they have is a $30.00 6" DMT hone and a flip open DMT pocket hone. No Smith's. No Norton. No generic $10.00 AlOx or SiC stones. What is the world coming to, anymore?
-
Re: Carborundum/SiC stone:
I finally got another (cheap) carborundum stone, and I found something very interesting. The coarse side is the slowest cutting stone I have ever seen. I had no idea carborundum could cut so slow (or at least that anyone would make such a stone!). It's probably 80 grit and it might as well just be a block of glass, then it would at least not make the occasional odd scratch. I use it for lap, though. It is great for lapping other stones, smeared with lapping paste. It's even slower wearing than my Norton coarse india. I wonder now, what an "ideal" carborundum pocket sharpening stone would be in terms of grit and hardness/bonding. I suppose if you made one fine and hard enough, it could put an edge to rival just about anything... Scary sharp uses wet/dry sandpaper which is SiC. But mayhap a fine and hard SiC stone would get glassy, quick, and not cut very well.
-
I found this stuff and tried some recently. I am not certain it made a difference however it certainly "feels" like it did. I'll need to do some more testing to be certain. The diamond spray smells awful.
-
You guys have some great systems!!!!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
