Pocket PryBar Recommendations
-
The Gerber Shard and Burktek Pocket Wrench 2 (Lee Valley has them) has served me well. I haven't tried it but if you want a cool vintage stuff you could pick up some knife picks from ebay, no nail puller though.
-
Ask Aloha007 to chime in, he is the expert in prying.
-
I carry this sometime, doesn't get much use.
Normally just use the flathead driver on my keychain to pry with.
-
Lots of good recommendations here. I'd like to add the Leatherman Brewzer. Extremely lightweight, but still perfectly usable for a lot of tasks. It's probably the pocket prybar-ish thing I got which has the most chance of being carried. (Most of the time I simply use the flat driver on a SAK.)
Edit: Link to Leatherman https://www.leatherman.com/brewzer-46.html
-
for something lower cost, but still branded, look at the Sanrenmu offerings too Most come with some sort of prybar too.
-
My two favorites are these:
Heavy duty, goes on the Multitool sheath
Light duty, on my keychain most days


-
I've been rocking the the Gerber Shard. Works well and survived TSA so far. Walmart has them on sale here for as combo with a ripstop I think. Silver instead of black so I've been eying it.
-
I love having a small pry tool at the ready. I had always paired my smaller tools like my 58mm SAKs and LM squirt with my Shard until I sadly lost it.
Here is a thread I started about my pry tools at that time.
/post/927794
Here is a thread later done by me about a new addition.
/post/1034318
Later I got 2 SS Chinese Pry tools. I used them for prying and scraping just like my other pry tools. I have not used either for turning screws or nail pulling but in what I use them for they work well. I love the high polish and they attach easily to my keychain. I keep one on my keychain now full time since loosing my Shard.
/post/1201476
IMO a small pry tool beats using the flat head of any MT other than Swisstool and Spirit. I have seen way to many snapped knife tips at the flea market. We have heard of way to many flat drivers also snapping.
Good luck in your search.
-
Thanks for the input and links. I still haven't gotten one yet, you hear that Santa?!
I think the strandsrd pry bars are just what I'm looking for, something that is small and carryable and willing to get abused.
-
@kaput said:
Thanks for the input and links. I still haven't gotten one yet, you hear that Santa?!I think the strandsrd pry bars are just what I'm looking for, something that is small and carryable and willing to get abused.
Yup a nice pry bar easily carried will be........ well carried. No need to ever use a blade tip and many can be used for other jobs you wouldn't want to use a knife tip for. I always have my PW2 in my LM sheath. I find its a great compliment to my MT and great on its own as well.
-
Some of mine for your consideration.










Sorry some of my madness I'm unable to control. :-[
-
@theonew said:
I don't have one but have often thought about getting one of these:
Widgy Pry Bars: The Original. American Made. Often Copied, Never Outpe
Proudly U.S.A Made! The Original. American Made. Often Copied, Never Outperformed. Pick Your Size! When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which
CountyComm (countycomm.com)
or for a couple of bucks more you can go titanium
CountyComm Government Products Group
CountyComm designs, manufactures and sells select products to federal, state and local government agencies. Specializing in EDC ( Every Day Carry )
CountyComm (countycomm.com)
Kinda cool, wonder why they did not make the keyring hole 1/4 inch to use for bit driver? Perplexing.
Sent from my SM-G935P using Tapatalk
-
A very nice clone for the money, TBH
Never got to try the real one, though, but this one is TOUGH!

-
Just bought mine. I'm not sure what brand and model I have



Cost me $2. Box has www.outdoor-edc.com as advertisement.
It's thick and solid.
-
I am very much leaning to a pry tool that is multi function. I mean to say it can do much more than pry and turn a screw. They Pocket Wrench 2, Leatherman #5, and Croc are all pry tools I've used. Each can turn bolts and hold nuts when turning screws. I am becoming quite fond of my PW2 the more I carry it. Its now on my both work days and off days.
-
@Aloha007 said:
I am very much leaning to a pry tool that is multi function. I mean to say it can do much more than pry and turn a screw. They Pocket Wrench 2, Leatherman #5, and Croc are all pry tools I've used. Each can turn bolts and hold nuts when turning screws. I am becoming quite fond of my PW2 the more I carry it. Its now on my both work days and off days.One idea is a adjustable wrench since that's a functionality that's hard to replace with a multitool. Older wrenches sometimes have pry bars on them but usually fairly thick ones. Might be useful for opening paint tins but not lifting nail heads or anything. I added one to a cheap 4" wrench but I'm not super happy with the shape. I know I got the inspiration from someone else on here who seemed to have made a better shape but I can't remember who.
-
Another vote for the widgy bars.


-
Oh I also recommend this one, it won't take much torque compared to others but the drivers are handy and it's very easy to carry around, in the keychain, belt loop, bag...


-
New this week, Chinese brand.
So far so good


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login