MLCT Crony - Need your input!
-
Ok, now that I've come back down to earth after "discovering" this thread. I'm thinking that maybe the two features that might not be necessary are the magnifying glass holder and the wire gauges/thumb grip.
The reasons are:
- I think a magnifying glass would just get scratched up being in a pocket on a keychain thus rendering it un-usable.
- Not sure how useful the wire gauges would actually be. It might not be worth the effort to include them.
I'm looking at this more from a cost to benefit ratio. Might there be something else that would be more useful in place of these two items?
Please, do not take offense to my thoughts. What you are doing is brilliant and requires waaay more talent than I have. Just thinking outloud is all.
Thanks again!
Mike -
Part of me wants one of the sides to incorporate a blade...but then the other part of me says no as it would no longer be EDC for UK law. :-\
-
That is a very cool looking thing Dough 8)
FWIW I agree with Mike's take, that the mag. glass and wire gauges are "nice to have", not things that would put me off wanting one, but definitely luxuries :D
Dough - Respect to you and your friend - I want one!
How long is it?
-
That looks really good. I like the design a lot, the features that you added make it very unique. My say is stick with it and see how much of this you can keep in the production model. The wire gauges are a nice addition giving the tool some of that uniqueness, but if they get dropped I guess metric ruler on one side (as is) and imperial on the other can take the spot.
-
@mike said:
Ok, now that I've come back down to earth after "discovering" this thread. I'm thinking that maybe the two features that might not be necessary are the magnifying glass holder and the wire gauges/thumb grip.The reasons are:
- I think a magnifying glass would just get scratched up being in a pocket on a keychain thus rendering it un-usable.
- Not sure how useful the wire gauges would actually be. It might not be worth the effort to include them.
I'm looking at this more from a cost to benefit ratio. Might there be something else that would be more useful in place of these two items?
Please, do not take offense to my thoughts. What you are doing is brilliant and requires waaay more talent than I have. Just thinking outloud is all.
Thanks again!
MikeWe are definately thinking about ditching the magnifying glass, but I really like the idea of having it. I agree that it will get scratched up in pocket carry, but I think its a useful thing to have... IM SO TORN ON THAT!!! haha. What would you guys like to see instead of the magnifying glass? BTW, that reduced the weight alot due to the large loss of steel in that area. I think that the wire guage/grips work well. Maybe you dont need a wire guage alot, but when you do you have one!! It also works really well as a thumb grip, and its not too difficult for us to throw it into a milling machine and mill some bumps.
As for the blade, flash...i thought about it but I really dont want an exposed sharp edge on this. Its going to be used in several appliation with applied torque, and that is just an accident waiting to happen!!!
-Dough
PS. Critiques are not seen as mean, I encourage you guys to throw your ideas. In no way does it offend me, it actually makes me feel good that you guys are enjoying the project, so keep the ideas flowing!!!
EDIT - For a full list of tools check the first post, it also included the CAD files, Pictures of the prototype, and will contain updates!.
-
If you're getting rid of the mag glass, I say add a dedicated hole for the key chain, and an oxygen tank key.
Hmmz this might be too much but what about a seat belt cutter? The blade is not exposed, can't cut your self.
-
Great concept and design work Dough!
Nice job so far!@max6166 said:
.....Reducing the curve of the prybar portion might make it better for pocket carry, though it reduces the leverage.....I agree that it might be worth considering reducing the prybar curve. In addition to the points Max makes, it would also allow the tool to be produced from thinner stock, and require less material to be milled away. (big cost and time savings?)
Also, is the bottle opener "hook" a bit too delicate in your design? How about sweeping the radius underneath the hook into it for added strength?
See picture below:

-
Wish I had a slab of Titanium laying around. I'd send ya some, but then I don't and machining Ti takes special equipment. The final product will be made out of stainless steel?
-
@J-sews said:
Great concept and design work Dough!
Nice job so far!.....Reducing the curve of the prybar portion might make it better for pocket carry, though it reduces the leverage.....
I agree that it might be worth considering reducing the prybar curve. In addition to the points Max makes, it would also allow the tool to be produced from thinner stock, and require less material to be milled away. (big cost and time savings?)
Also, is the bottle opener "hook" a bit too delicate in your design? How about sweeping the radius underneath the hook into it for added strength?
See picture below:
Awesome idea J-Sews! It is pretty damn strong as it, but this will just make it invincible! Haha, great idea man. The prybar, however, will be BENT to that curve, not milled out. So the stock will be the same regardless. What we were thinking about trying is doing a double bend, similar to the Gerber artifact. You still get the crowbill curve, but the prybar lays almost in the same plane at the whole tool.
Also a note, the gap between the open "prongs" of the wrench will have a clasp that goes between them. This will solve 3 problems.
- Allow you to easily attach/detach from keychain.
- Cover the screwdriver end so it doesnt poke you OUCH
- Give added strength to the wrench. You can use it as a semi-box end, or if you cant get to the bolt with a box end, open the clasp, engage the nut, close the clasp, then wrench on it.
I like the seatbelt cutter idea, this is something we might have to look into if we get rid of the magnifying glass.
Also, someone said put a flathead on the other wrench "prong". This wouldnt work, because you need clearance for the part to swing aroud while using the screwdriver. If the two prongs at the end were the same length, the one not being used as a driver would scratch the surface of the part, this is why there is such a large difference in lengths of the prongs.
Keep the ideas comin guys, and the first post now has actual pictures of the prototype!!!!
-Dough
-
I have the equipment to machine titanium, but the actual parts are going to be most probably 440C stainless.
-Dough
-
Now we are only missing the slab :P. All jokes aside but an oxygen key + seat belt cutter can come in handy for EMS personnel. The key is just a small cut out, not hard to do. Good job!!! Keep it up.
-
It's looking good! Can't wait. :D
-
Any chance of the MT initials somewhere so that this becomes an exclusive for our little family

-
I could certainly do that. If its real popular maybe ill post it on knife forums or blade forums, see if those guys want em. However, MT.org will get exclusive, limited editions!
By the way, the "company" name, which the logo can be seen in the CAD near the pry bar, is Morrow & Lamb Custom Tools. I'm thinking about calling this model the "companion" but I'm not sure if thats taken/stupid lol.
-Dough
-
I see a please give this tool a name contest coming up :D
-
How about the "Can Dough" tool :D
-
The Nut Cracker o.O
-
I'm favoring the Doughboy.
And now that I look at it, I'm starting to wonder about the ergonomics. =o
-
@One Lame Frog said:
I'm favoring the Doughboy.And now that I look at it, I'm starting to wonder about the ergonomics. =o
I agree it looks a little funny, but it feels pretty comfortable in the hands for all of the operations. Thats why we went through a couple design changes to make it fit better in the hand. I want to kind of keep away from the "Dough" type names, even though i do love them haha, cause its also alot of work done by my friend Kenny along with me.
-Dough
-
How about "Kendough" :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login