Bladeless Explorer?
-
No it won't fit. Each layer has its own shape and unique spring. So you can't and some you can. This one no. You could however remove the entire layer and have some scales made for it.
Sent from my iPhone using Tapatalk
-
Okay, thanks.
So removing the entire blade layer, using a liner with no cut-out and custom scales would be the way to go? :) -
two options for using standard scales.
-
Forego the bushings and glue a spare front scale (without cutout) onto the rearmost liner. The scale tool slots will be assymmetric, so while this approach is the simplest to do it is not the most elegant option. Alternately you can find a front scale without any tool slots and just use that on the back.
-
attach scales as normal. and then carefully cut out a section of a spare front scale to fill the cutout on the rear scale. This will require a great deal of accuracy, but should make the result almost perfect, if done right
-
-
I keep meaning to test if the corkscrew or phillips driver will fit with the scissor spring in place of the hook. The awl works with the scissors, with a bit of tweaking to the shape of the spring so I reckon the corkscrew/phillips might. Then you could put the scissors next to the scale with the cutout.
-
@hiraethus said:
I keep meaning to test if the corkscrew or phillips driver will fit with the scissor spring in place of the hook. The awl works with the scissors, with a bit of tweaking to the shape of the spring so I reckon the corkscrew/phillips might. Then you could put the scissors next to the scale with the cutout.That's a good idea but I doubt very seriously that will work as the scissor spring is shaped very different than the others.
Sent from my iPhone using Tapatalk
-
I keep meaning to test if the corkscrew or phillips driver will fit with the scissor spring in place of the hook. The awl works with the scissors, with a bit of tweaking to the shape of the spring so I reckon the corkscrew/phillips might. Then you could put the scissors next to the scale with the cutout.
That's a good idea but I doubt very seriously that will work as the scissor spring is shaped very different than the others.
Sent from my iPhone using Tapatalk
Yout know if I bed the scissors spring like I do for the awl mod... I bet it would work with the corkscrew. Interesting
-
Do you mean putting washers between the spring and liner, syph?

-
This is a bladeless Explorer I made for a member's young daughter.
The blade was replaced with a ruler made from a 150mm steel rule and the small blade swapped out for a nail file.
I used a bird head spacer from my spares box to space the ruler.
Rather than try to cut a nail nick into the side of the ruler I went with a notch in the end.
The tips of the scissors blades were rounded off to make it even more child friendly.
I don't appear to have a photo of the completely finished knife. The scales are made from custom cast pink and black swirled resin and were polished to a glossy finish.
-
@PTRSAK said:
This is a bladeless Explorer I made for a member's young daughter.
The blade was replaced with a ruler made from a 150mm steel rule and the small blade swapped out for a nail file.
I used a bird head spacer from my spares box to space the ruler.
Rather than try to cut a nail nick into the side of the ruler I went with a notch in the end.
The tips of the scissors blades were rounded off to make it even more child friendly.
I don't appear to have a photo of the completely finished knife. The scales are made from custom cast pink and black swirled resin and were polished to a glossy finish.
Excellent work Peter :o

-
@PTRSAK said:
This is a bladeless Explorer I made for a member's young daughter.
The blade was replaced with a ruler made from a 150mm steel rule and the small blade swapped out for a nail file.
I used a bird head spacer from my spares box to space the ruler.
Rather than try to cut a nail nick into the side of the ruler I went with a notch in the end.
The tips of the scissors blades were rounded off to make it even more child friendly.
I don't appear to have a photo of the completely finished knife. The scales are made from custom cast pink and black swirled resin and were polished to a glossy finish.
That's a great mod. Really nice idea to use the steel rule. That would also make a great replacement for the fish tickler on a Swiss Champ or similar. Although I guess to be most useful it needs to be in an outside layer.
-
@PTRSAK said:
This is a bladeless Explorer I made for a member's young daughter.
The blade was replaced with a ruler made from a 150mm steel rule and the small blade swapped out for a nail file.
I used a bird head spacer from my spares box to space the ruler.
Rather than try to cut a nail nick into the side of the ruler I went with a notch in the end.
The tips of the scissors blades were rounded off to make it even more child friendly.
I don't appear to have a photo of the completely finished knife. The scales are made from custom cast pink and black swirled resin and were polished to a glossy finish.
This is EXCELLENT. What a fantastic concept for a kids tool

-
<u>CAUTION:</u> What you are about to see is a quick and dirty approach to the problem at hand. It is not pretty and portrays harm to an innocent SAK. Turn back now!!!
I've been contemplating this because I have 5 and 6 year old boys who need tools of their own. Rather than muck about with what spring fits where, and due to the likelihood of the poor knife getting lost, I wanted to come up with a solution that had a low entry cost, low modification cost, and was easily repeatable. This Explorer came to me as a freebie with another purchase because the main blade was bent up and over sharpened. It also hasn't been cleaned in forever. The modification plan is simple: cut off the main blade, cut off the small blade, cut off the awl, and round the scissor tips. Certainly not pretty, but effective. I'll clean it up afterwards and see what the boys think of it. If all goes well, I will likely make another out of a second beater Explorer. If they prove they can handle this, in a couple years they will get bladed SAKs of their own in much nicer condition. And now, The Debladening!
Poor, poor, unfortunate Explorer:

Main blade after meeting the cut off disk, file, and sand paper:

Small blade too:

I forgot to take a picture of the awl before it was folded away in shortened form, but here are the scissors:

It's currently sitting in a dish soap bath waiting for a good scrubbing. Overall, not a hard project (wear eye and ear protection and use a vice) but I think it will meet my needs for now. After cleanup, I'll take some final pics.
I feel a bit sad about putting it under the knife, so to speak, but no going back now.
-
:o
:ahhh I'm calling the RSPCSAK on you!
-
Here is my modified Explorer after some cleanup. I think there was a mix of barbecue sauce and white paint inside everything. I might do some light polishing and then get the front engraved with my son's name. I have another rough Explorer on the way from a friend to undergo the same treatment. I think the second one will go a little smoother and look a little more finished, but the process will be the same.
Folded minus blades:

The truncated awl:

The complete load-out:

I think the RSPCSAK may see this as rehabilitation of an abandoned and abused SAK. In this form, it will now fill the proudest of SAK roles: being the tool of a young child and hopefully inspiring a lifelong love of multitools.
-
Nicely done

-
@s1xty7 said:
Here is my modified Explorer after some cleanup. I think there was a mix of barbecue sauce and white paint inside everything. I might do some light polishing and then get the front engraved with my son's name. I have another rough Explorer on the way from a friend to undergo the same treatment. I think the second one will go a little smoother and look a little more finished, but the process will be the same.Folded minus blades:

The truncated awl:

The complete load-out:

I think the RSPCSAK may see this as rehabilitation of an abandoned and abused SAK. In this form, it will now fill the proudest of SAK roles: being the tool of a young child and hopefully inspiring a lifelong love of multitools.
All joking aside - this is a great job. It will give your young uns a good grounding in tool use before graduating to the bladed version. I wish my dad had done the same for me when I was little.

-
@magentus said:
All joking aside - this is a great job. It will give your young uns a good grounding in tool use before graduating to the bladed version. I wish my dad had done the same for me when I was little.

Thanks for the kind words fellas. I grew up with pocket knives and BB guns back in the 80s and 90s and spent quite a few years in the Boy Scouts and camping. Granted I was a little older when I got my first knife, but given my pocket knife interest, I figured I could get the boys started with a kid friendly version while they were still young. Getting familiar with the tools and how to properly use them without getting pinched should help prevent a few cuts later on. While this Explorer mod is ham fisted, it seemed the best way to accomplish what I wanted given they will likely be lost at some point (I mean, they are kids). I'm not sure why Victorinox doesn't make a bladeless version of some of their more popular tools. How much more would it cost to make an Explorer without cutting implements from the factory? It'd work well for kids, travelers, and those who can't carry blades for whatever reason. I'd probably buy 6 right now.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login