Bladeless Explorer?
-
@magentus said:
All joking aside - this is a great job. It will give your young uns a good grounding in tool use before graduating to the bladed version. I wish my dad had done the same for me when I was little.

Thanks for the kind words fellas. I grew up with pocket knives and BB guns back in the 80s and 90s and spent quite a few years in the Boy Scouts and camping. Granted I was a little older when I got my first knife, but given my pocket knife interest, I figured I could get the boys started with a kid friendly version while they were still young. Getting familiar with the tools and how to properly use them without getting pinched should help prevent a few cuts later on. While this Explorer mod is ham fisted, it seemed the best way to accomplish what I wanted given they will likely be lost at some point (I mean, they are kids). I'm not sure why Victorinox doesn't make a bladeless version of some of their more popular tools. How much more would it cost to make an Explorer without cutting implements from the factory? It'd work well for kids, travelers, and those who can't carry blades for whatever reason. I'd probably buy 6 right now.
-
@magentus said:
All joking aside - this is a great job. It will give your young uns a good grounding in tool use before graduating to the bladed version. I wish my dad had done the same for me when I was little.

Thanks for the kind words fellas. I grew up with pocket knives and BB guns back in the 80s and 90s and spent quite a few years in the Boy Scouts and camping. Granted I was a little older when I got my first knife, but given my pocket knife interest, I figured I could get the boys started with a kid friendly version while they were still young. Getting familiar with the tools and how to properly use them without getting pinched should help prevent a few cuts later on. While this Explorer mod is ham fisted, it seemed the best way to accomplish what I wanted given they will likely be lost at some point (I mean, they are kids). I'm not sure why Victorinox doesn't make a bladeless version of some of their more popular tools. How much more would it cost to make an Explorer without cutting implements from the factory? It'd work well for kids, travelers, and those who can't carry blades for whatever reason. I'd probably buy 6 right now.
My guess is since the blade layer has the corkscrew if you remove that layer they have no back scale witour the cutout to use so they'd have to make a new back liner and scale.
-
@magentus said:
All joking aside - this is a great job. It will give your young uns a good grounding in tool use before graduating to the bladed version. I wish my dad had done the same for me when I was little.

Thanks for the kind words fellas. I grew up with pocket knives and BB guns back in the 80s and 90s and spent quite a few years in the Boy Scouts and camping. Granted I was a little older when I got my first knife, but given my pocket knife interest, I figured I could get the boys started with a kid friendly version while they were still young. Getting familiar with the tools and how to properly use them without getting pinched should help prevent a few cuts later on. While this Explorer mod is ham fisted, it seemed the best way to accomplish what I wanted given they will likely be lost at some point (I mean, they are kids). I'm not sure why Victorinox doesn't make a bladeless version of some of their more popular tools. How much more would it cost to make an Explorer without cutting implements from the factory? It'd work well for kids, travelers, and those who can't carry blades for whatever reason. I'd probably buy 6 right now.
My guess is since the blade layer has the corkscrew if you remove that layer they have no back scale witour the cutout to use so they'd have to make a new back liner and scale.
Plus, that would no longer be a SAK
:DLove the mod BTW

-
If my memory serves me,I'd a look at making a bladeless SAK a few years ago. Pending me finding the thread,a standard can opener and cap lifter will mate up to the main blade/cork screw back spring...
I'll be back in a bit...
-
Well,that's the thread I was after
/post/554633
I wonder if Rahmeds photos are still available
... -
And there was this...
/post/1198206
-
Lots cool mod ideas in this thread.

This was my approach to the bladess SAK... Swiss Army Knifeless that is...

Details here:
/topic/68332
Sent from my iPhone using Tapatalk
-
-
Lots cool mod ideas in this thread.

This was my approach to the bladess SAK... Swiss Army Knifeless that is...

Details here:
/topic/68332
Sent from my iPhone using Tapatalk
It's missing a fish scaler but I like it

Yup... I took it out... hahaha... Thanks

I was -mostly- joking ;) That's a great bladeless version of a SAK. Add the cyber tool and in-line awl, if you care for those, and you have the ultimate toolset.
Some might say you need a spatula to achieve the ultimate toolset but not me :D

-
Lots cool mod ideas in this thread.

This was my approach to the bladess SAK... Swiss Army Knifeless that is...

Details here:
/topic/68332
Sent from my iPhone using Tapatalk
It's missing a fish scaler but I like it

Yup... I took it out... hahaha... Thanks

I was -mostly- joking ;) That's a great bladeless version of a SAK. Add the cyber tool and in-line awl, if you care for those, and you have the ultimate toolset.
Some might say you need a spatula to achieve the ultimate toolset but not me :D

I know...

Sent from my iPhone using Tapatalk
-
I saw that this thread had a bunch of replies, wow!

You all got me thinking about this mod again.
I like Jaya mans execution, but can I use the metal saw spring and some washers? Or will there be problems larger than a cleaning access gap? ???
I ask because the ranger is going cheap on uk amazon.Thanks again all, and sorry if I am missing something obvious. :)
-
Reason why I chose the blade backspring is so that I can retain the corkscrew (thicker than the metal saw)...
Sent from my iPhone using Tapatalk
-
I'm probably missing something, but could you not pad that metal saw spring with washers?
If its the same thickness as the wood saw spring, it appears to be only a little thinner. Why could I not make it thicker with washers to make the corkscrew fit?

Thanks again, and sorry if I am missing something.
-
Just to clear things, am I correct in assuming that you plan to use a single metal saw backspring, avmetal saw and a corkscrew in one layer?
If so, then there will be a visible gap between the layer and the outer liner...
Sent from my iPhone using Tapatalk
-
You assume correctly, and a gap is okay with me.
I was just wondering if there would be other problems with doing it that way.
Thanks!
-
Liner is flexible... so is the cellidor scales

Sent from my iPhone using Tapatalk
-
Okay, I understand.
Thanks. :) -
So, as I understand it, the only parts I need for a bladeless ranger are some thin washers?
I was looking around, where could I find a set of washers around 0.5mm thick(is that the approx correct thickness?), with an inner diameter of approx 2.5mm?
Has anyone bought the like of that size before?
I'm looking around the 'bay.Thanks. :)
Edit: Would you consider it easier to make the washers from brass sheet? That seems to be more available.
-
I got my last order of phosphor bronze knife washers from http://usaknifemaker.com. There are a few other similar sites. You can try fastener places too, but the knife shops usually have what you need in more workable quantities (not 1000+). Light polishing may be required to remove small edges.
Good luck.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login