New SOG (2017) - Initial thoughts
-
Last year, the Reactor and PowerPlay were released in February. So, maybe...

-
I've sent a message off to SOG to see what they have to say about release dates.
Def
-
I dont think I can wait until June....
Ive never purchased a NIB multitool for myself. The PowerAccess may change that.
-
@sLaughterMed said:
I dont think I can wait until June....Ive never purchased a NIB multitool for myself. The PowerAccess may change that.
If that isn't high praise I don't know what is!
Def
-

VS

Replaceable cutters VS Compound leverage and unimpeded gripping area
Inboard Tools VS Outboard Tools
Ph2 and 2x flat drivers VS Ph1 and 4x flat drivers
Saw and serrated blade VS central 1/4" hex driver and protractor
Lanyard ring and sheath VS pocket clip (no sheath)
$60.85 list price VS $67.00 list price
-
@50ft-trad said:

VS

Replaceable cutters VS Compound leverage and unimpeded gripping area
I think PowerAcess wins here. Compound leverage is a huge plus to me, and the replacable wirecutters were never all that special
Inboard Tools VS Outboard Tools
PowerAcess, no contest, outboard is vastly superior for almost all tasks, and makes the pliers more comfortable to use.
Ph2 and 2x flat drivers VS Ph1 and
4x3x flat drivers
[\quote]
I think Rebar wins here. PH2 (especially one that also works on PH1) is just much more useful than the small driver.[Quote]
Saw and serrated blade VS central 1/4" hex driver and protractorSigh. Rebar again, because lets face it, if im pocket carrying, I wont have a bit kit. I wish something else had gone here, but its hardly bad just because I wont use it.
Lanyard ring and sheath VS pocket clip (no sheath)
[\Quote]
PowerAcess. I wish the clip wasnt so large, but I dislike sheath carry.
[Quote]$60.85 list price VS $67.00 list price
Rebar.
Totals:
Rebar: 3
PowerAcess: 3smurf.
-
I think a lot of people would echo your feelings there. As for the bit kit, with the amount of flat blades on there, plus the smaller Phillips, many people would probably be fine with just a long Ph2 bit, which you could just keep in your wallet if you needed to.
-
@50ft-trad said:

VS

Replaceable cutters VS Compound leverage and unimpeded gripping area
Inboard Tools VS Outboard Tools
Ph2 and 2x flat drivers VS Ph1 and 4x flat drivers
Saw and serrated blade VS central 1/4" hex driver and protractor
Lanyard ring and sheath VS pocket clip (no sheath)
$60.85 list price VS $67.00 list price
Just a few observations on this particular head to head matchup:
The 2x Flat drivers are dedicated flatheads on the Rebar, while half the 4x Flat Drivers on the SOG are integrated into other tools.
The folding lanyard ring on the Rebar is also quite awful, and is sheet metal so any lanyard is not likely to survive any length of time. And, the sheath issue is easily fixed since you can always buy a sheath to go with it.
I really hate folding lanyard rings. The LM ones are flimsy and sharp and the Gerber ones are really thick and take up too much space. Thankfully at least Gerber has had the sense to stop putting them on tools.
Def
-
I've been closely examining the Powergrab and a few things to note
-
The screws that hold the internal tools together are regular torx screws. Which imo means the inner tools will be somewhat interchangeable. Which would be great because I hate sog scissors and the file is not great by any means. I've emailed sog about this but so far no response. If the possibility is there to custom, then

-
The tabs on the side are new lock styles for sog. If you zoom in you can see a small unlock icon on the side. I've attached a pic below. Thank god they didn't use the awful studs from the powerplay. That would immediately turned me off of this tool. Another win....if they work

-
With all of these things in mind, I'm actually hoping this is the new successor to the Powerlock. I enjoy using my PL but it has one huge fault...flimsy covers
The powergrab is really looking like a winner, it's like they used the powerplay as a pilot tool and this is their ace.
-
-
That is very interesting- I hadn't looked that closely at it, but that is one of the things I love about this forum! Nothing gets past MTO members! :D
Def
-
I thought 50ft had already established those were locks....

I am going to have to change my opinion though, initially I thought those were plenty robust for lock releases, but now that Demel has posted that close up, I'm beginning to have my doubts. That is one thin piece of metal going from the loop to the locks.
-
@sLaughterMed said:
I thought 50ft had already established those were locks....
I am going to have to change my opinion though, initially I thought those were plenty robust for lock releases, but now that Demel has posted that close up, I'm beginning to have my doubts. That is one thin piece of metal going from the loop to the locks.
He might have but I'm still getting caught up on reading. I've been out for a while.
I'm not sure how reliable they are either but that's why I said "if" they work.

-
@sLaughterMed said:
I thought 50ft had already established those were locks....
I am going to have to change my opinion though, initially I thought those were plenty robust for lock releases, but now that Demel has posted that close up, I'm beginning to have my doubts. That is one thin piece of metal going from the loop to the locks.
Yeah, I'd spotted they were the new lock releases, and mentioned earlier in this thread that I thought they looked a bit delicate. Depending how high they sit off the frame, they might snag on stuff too
EDIT: Actually, I might have mentioned it in the catalogue thread instead
-
@Demel said:
3) With all of these things in mind, I'm actually hoping this is the new successor to the Powerlock. I enjoy using my PL but it has one huge fault...flimsy covers
The powergrab is really looking like a winner, it's like they used the powerplay as a pilot tool and this is their ace.I agree, especially on this last point. From the initial pic from the catalog, I was thinking that the PowerGrab would end up being the replacement for the PowerLock, but that it didn't look the part. But after the additional images on SOGs website went live, it looks similar to the PL in the right ways, but with some necessary enhancements. I think the bit driver on the reverse of the pliers head was a real game changer, not just for SOG, but the MT industry, so they aggressively sought to saturate the market with their innovation. Now, their "heavy-duty" offering matches up even better with the Surge. Now they have a "mid-size" tool with the PowerPlay to go head to head with Wave. They have the "lightweight" Reactor that competes directly with Skeletool. SOGs answer to the Wingman/Sidekick is the PowerAccess. Basically, from 2014 until now, SOG has completely revamped their multitool line up and they are more competitive with Leatherman
-
I hate to admit it, but I'm intrigued by the Baton Q1.And then I look at the additional pictures, realize how large it is, and retract my statement.
I'll probably end up with a Flint, though, once it comes to market.
-
@Sazabi said:
I hate to admit it, but I'm intrigued by the Baton Q1.And then I look at the additional pictures, realize how large it is, and retract my statement.
I'll probably end up with a Flint, though, once it comes to market.
I know I'm repeating myself, but I'm REALLY struggling to see market potential for the Batons. Sure, a handful of collectors might grab one, but they are big, too expensive to be "Dad gifts", not particularly ergonomic, and quite light on features considering price and size. There's a lot of better options out there.
-
Whoa. Some very cool looking stuff coming out!

-
I have poopoo-ed enough new designs then ended up liking them after using and carrying them (cough Freestyle cough) that while I may have some preconceived notions about the usefulness of a tool, I always keep an open mind about it. It's fine if you don't think you are interested, but my curiosity drives me to the point where I want to try the new tools, and I really want them to work.
Maybe it's because of that cheapo Benchmark that I have played with often that I see more potential in the Baton series, but I have to say they may just be something interesting and new in an unfamiliar package, and I would hate to shoot them down simply because they are different.
Def
-
@Grant Lamontagne said:
I have poopoo-ed enough new designs then ended up liking them after using and carrying them (cough Freestyle cough) that while I may have some preconceived notions about the usefulness of a tool, I always keep an open mind about it. It's fine if you don't think you are interested, but my curiosity drives me to the point where I want to try the new tools, and I really want them to work.Maybe it's because of that cheapo Benchmark that I have played with often that I see more potential in the Baton series, but I have to say they may just be something interesting and new in an unfamiliar package, and I would hate to shoot them down simply because they are different.
Def
I agree, this could be a good seller since there's so many ways of carrying a pen and most of them would work for carrying these. They might simply be that these aren't really aimed at MT.o users though since we, almost by definition, are OK with carrying traditionally shaped multitools. I believe that in the EDC-crowd these would fit in perfectly in pocket organisers or indeed in pen slots in briefcases and other bags.
-
@Grant Lamontagne said:
I have poopoo-ed enough new designs then ended up liking them after using and carrying them (cough Freestyle cough) that while I may have some preconceived notions about the usefulness of a tool, I always keep an open mind about it. It's fine if you don't think you are interested, but my curiosity drives me to the point where I want to try the new tools, and I really want them to work.Maybe it's because of that cheapo Benchmark that I have played with often that I see more potential in the Baton series, but I have to say they may just be something interesting and new in an unfamiliar package, and I would hate to shoot them down simply because they are different.
Def
Did that with the Signal. Still hate the plastic bits, but apart from that it is great.
I'm going to get the Q4. Don't really think it is all that expensive. I mean between the bits, the ratchet, the sheath and the R&D, new production line etc... it seems not that expensive to me.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




